Torus elements used in effective shock absorber

Energy absorbing device forces torus elements to revolve annularly between two concentric tubes when a load is applied to one tube. Interference forces can be varied by using torus elements of different thicknesses. The device operates repeatedly in compression or tension, and under problems of large onset rate tolerance or structural overload

Automatic thermal switch

An automatic thermal switch to control heat flow includes two thermally conductive plates and a thermally conductive switch saddle pivotally mounted to the first plate. A flexible heat carrier is connected between the switch saddle and the second plate. A phase-change power unit, including a piston coupled to the switch saddle, is in thermal contact with the first thermally conductive plate. A biasing element biases the switch saddle in a predetermined position with respect to the first plate. When the phase-change power unit is actuated by an increase in heat transmitted through the first place, the piston extends and causes the switch saddle to pivot, thereby varying the thermal conduction between the two plates through the switch saddle and flexible heat carrier. The biasing element, switch saddle, and piston can be arranged to provide either a normally closed or normally opened thermally conductive path between the two plates

Automatic thermal switch

An automatic thermal switch to control heat flow includes a first thermally conductive plate, a second thermally conductive plate and a thermal transfer plate pivotally mounted between the first and second plates. A phase change power unit, including a plunger connected to the transfer plate, is in thermal contact with the first thermally conductive plate. A biasing element, connected to the transfer plate, biases the transfer plate in a predetermined position with respect to the first and second plates. When the phase change power unit is actuated by an increase in heat transmitted through the first plate, the plunger extends and pivots the transfer plate to vary the thermal conduction between the first and second plates through the transfer plate. The biasing element, transfer plate and piston can be arranged to provide either a normally closed or normally open thermally conductive path between the first and second plates

Maintaining an Interactionist Perspective of Undesirable Behaviour: What Is the Role of the Educational Psychologist?

Special Educational Needs (SEN) legislation has recently undergone the largest reform in over a decade. Whilst several key changes have been widely discussed, the shift in terminology to describe children’s behavioural difficulties has received less attention. A greater emphasis has been placed on encouraging school staff and professionals to see beyond the observable behaviour and to give consideration to possible underpinning factors. However, the explicit focus on identifying undiagnosed learning difficulties, speech and language difficulties or mental health issues may serve to encourage a paradigm shift towards a more ‘within-child’ rather than interactionist perspective of undesirable behaviour. This paper will discuss this possibility, and with specific reference to speech and language difficulties, it will consider how through their five core functions educational psychologists can seek to maintain an interactionist perspective of undesirable behaviour

Do lemurs know when they could be wrong? An investigation of information seeking in three species of lemur (<i>Lemur catta, Eulemur rubriventer, </i>and<i> Varecia variegata</i>)

Sixteen lemurs, including representatives from three species (Lemur catta, Eulemur rubriventer, Varecia variegata), were presented with a food seeking task where information about the rewards location, in one of two plastic tubes, was either known or not known. We evaluated whether lemurs would first look into the tube prior to making a choice. This information-seeking task aimed to assess whether subjects would display memory awareness, seeking additional information when they became aware they lacked knowledge of the rewards location. We predicted lemurs would be more likely to look into the tube when they had insufficient knowledge about the rewards position. Lemurs successfully gained the reward on most trials. However, they looked on the majority of trials regardless of whether they had all the necessary information to make a correct choice. The minimal cost to looking may have resulted in checking behaviour both to confirm what they already knew and to gain knowledge they did not have. When the cost of looking increased (elevating end of tube requiring additional energy expenditure to look inside - Experiment 2), lemurs still looked into tubes on both seen and unseen trials; however, the frequency of looking increased when opaque tubes were used (where they could not see the rewards location after baiting). This could suggest they checked more when they were less sure of their knowledge state

Exploring abstinence, recovery, identity and personhood in individuals engaging with addiction services

Section A: This review aimed to understand how abstinence is understood in recovery by those who access substance misuse services. A systematic literature review was undertaken and fourteen studies were identified. These were quality assessed using the CASP quality analysis tool. Limitations of CASP as a tool were discussed. The fourteen studies were analysed using thematic synthesis and seven themes with ten sub-themes were identified. Themes were organised along a temporal path. Future clinical and research directions were discussed, as were strengths and limitations of the paper. Section A: This review aimed to understand how abstinence is understood in recovery by those who access substance misuse services. A systematic literature review was undertaken and fourteen studies were identified. These were quality assessed using the CASP quality analysis tool. Limitations of CASP as a tool were discussed. The fourteen studies were analysed using thematic synthesis and seven themes with ten sub-themes were identified. Themes were organised along a temporal path. Future clinical and research directions were discussed, as were strengths and limitations of the paper

The segregation of starless and protostellar clumps in the Hi-GAL l=224deg region

Stars form in dense, dusty structures, which are embedded in larger clumps of molecular clouds often showing a clear filamentary structure on large scales (> 1pc). One of the best-studied regions in the Hi-GAL survey can be observed toward the l=224deg field. Here, a filamentary region has been studied and it has been found that protostellar clumps are mostly located along the main filament, whereas starless clumps are detected off this filament and are instead found on secondary, less prominent filaments. We want to investigate this segregation effect and how it may affect the clumps properties. We mapped the 12CO(1-0) line and its main three isotopologues toward the two most prominent filaments observed toward the l=224deg field using the Mopra radio telescope, in order to set observational constraints on the dynamics of these structures and the associated starless and protostellar clumps. Compared to the starless clumps, the protostellar clumps are more luminous, more turbulent and lie in regions where the filamentary ambient gas shows larger linewidths. We see evidence of gas flowing along the main filament, but we do not find any signs of accretion flow from the filament onto the Hi-GAL clumps. We analyze the radial column density profile of the filaments and their gravitational stability. The more massive and highly fragmented main filament appears to be thermally supercritical and gravitationally bound, assuming that all of the non-thermal motion is contributing thermal-like support, suggesting a later stage of evolution compared to the secondary filament. The status and evolutionary phase of the Hi-GAL clumps would then appear to correlate with that of the host filament.Comment: Accepted for publication on "Astronomy and Astrophysics

Study of ephemeris accuracy of the minor planets

The current state of minor planet ephemerides was assessed, and the means for providing and updating these emphemerides for use by both the mission planner and the astronomer were developed. A system of obtaining data for all the numbered minor planets was planned, and computer programs for its initial mechanization were developed. The computer based system furnishes the osculating elements for all of the numbered minor planets at an adopted date of October 10, 1972, and at every 400 day interval over the years of interest. It also furnishes the perturbations in the rectangular coordinates relative to the osculating elements at every 4 day interval. Another computer program was designed and developed to integrate the perturbed motion of a group of 50 minor planets simultaneously. Sampled data resulting from the operation of the computer based systems are presented

Chemisorption on a model bcc metal

The system considered here is that of a single atom with one energy level chemisorbed on the (001) surface of a model bcc metal. We present the change in the density of electronic states Δn (E) due to chemisorption for two cases: one when the adatom is bound to a single substrate atom in the "on‐site" configuration and the other when it is bound to four substrate atoms in the "centered fourfold site." In principle, this change in the density of states Δn can be related to the results of photoemission measurements