10,406 research outputs found
The image ray transform for structural feature detection
The use of analogies to physical phenomena is an exciting paradigm in computer vision that allows unorthodox approaches to feature extraction, creating new techniques with unique properties. A technique known as the "image ray transform" has been developed based upon an analogy to the propagation of light as rays. The transform analogises an image to a set of glass blocks with refractive index linked to pixel properties and then casts a large number of rays through the image. The course of these rays is accumulated into an output image. The technique can successfully extract tubular and circular features and we show successful circle detection, ear biometrics and retinal vessel extraction. The transform has also been extended through the use of multiple rays arranged as a beam to increase robustness to noise, and we show quantitative results for fully automatic ear recognition, achieving 95.2% rank one recognition across 63 subjects
The Field White Dwarf Mass Distribution
We revisit the properties and astrophysical implications of the field white
dwarf mass distribution in preparation of Gaia applications. Our study is based
on the two samples with the best established completeness and most precise
atmospheric parameters, the volume-complete survey within 20 pc and the Sloan
Digital Sky Survey (SDSS) magnitude-limited sample. We explore the modelling of
the observed mass distributions with Monte Carlo simulations, but find that it
is difficult to constrain independently the initial mass function (IMF), the
initial-to-final-mass relation (IFMR), the stellar formation history (SFH), the
variation of the Galactic disk vertical scale height as a function of stellar
age, and binary evolution. Each of these input ingredients has a moderate
effect on the predicted mass distributions, and we must also take into account
biases owing to unidentified faint objects (20 pc sample), as well as unknown
masses for magnetic white dwarfs and spectroscopic calibration issues (SDSS
sample). Nevertheless, we find that fixed standard assumptions for the above
parameters result in predicted mean masses that are in good qualitative
agreement with the observed values. It suggests that derived masses for both
studied samples are consistent with our current knowledge of stellar and
Galactic evolution. Our simulations overpredict by 40-50% the number of massive
white dwarfs (M > 0.75 Msun) for both surveys, although we can not exclude a
Salpeter IMF when we account for all biases. Furthermore, we find no evidence
of a population of double white dwarf mergers in the observed mass
distributions.Comment: 15 pages, 16 figures, accepted for publication in MNRA
Analytical model of non-Markovian decoherence in donor-based charge quantum bits
We develop an analytical model for describing the dynamics of a donor-based
charge quantum bit (qubit). As a result, the quantum decoherence of the qubit
is analytically obtained and shown to reveal non-Markovian features: The
decoherence rate varies with time and even attains negative values, generating
a non-exponential decay of the electronic coherence and a later recoherence.
The resulting coherence time is inversely proportional to the temperature, thus
leading to low decoherence below a material dependent characteristic
temperature.Comment: 19 pages, 3 figure
Large periodic time variations of termination shock particles between ~0.5-20 mev and 6-14 mev electrons measured by the crs experiment on Voyager 2 as it crossed into the heliosheath in 2007: An example of freshly accelerated cosmic rays?
We have examined features in the structure of the heliosheath using the fine scale time variations of termination shock particles (TSP) between ~0.5 - 20 MeV and electrons between 2.5-14 MeV measured by the CRS instrument as the V2 spacecraft crossed the heliospheric termination shock in 2007. The very disturbed heliosheath at V2 is particularly noteworthy for strong periodic intensity variations of the TSP just after V2 crossed the termination shock (2007.66) reaching a maximum between 2007.75 and 2008.0. A series of 42/21 day periodicities was observed at V2 along with spectral changes of low energy TSP and the acceleration of 6-14 MeV electrons. Evidence is presented for the acceleration of TSP and electrons at the times of the 42/21 day periodicities just after V2 crossed the HTS. Spectra for TSP between 2-20 MeV and electrons between 2.5-14 MeV are derived for three time periods including the time of the HTS crossing. The energy spectra of TSP and electrons at these times of intensity peaks are very similar above ~3 MeV, with exponents of a power law spectrum between -3.0 and -3.6. The ratio of TSP intensities to electron intensities at the same energy is ~500. The electron intensity peaks and minima are generally out of phase with those of nuclei by ~1/2 of a 42 day cycle. These charge dependent intensity differences and the large periodic intensity changes could provide new clues as to a possible acceleration mechanism
Evolution of an elliptical bubble in an accelerating extensional flow
Mathematical models that describe the dynamical behavior of a thin gas bubble embedded in a glass fiber during a fiber drawing process have been discussed and analyzed.
The starting point for the mathematical modeling was the equations presented in [1] for a glass fiber with a hole undergoing extensional flow. These equations were reconsidered here with the additional reduction that the hole, i.e. the gas bubble, was thin as compared to the radius of the fiber and of finite extent. The primary model considered was one in which the mass of the gas inside the bubble was fixed. This fixed-mass model involved equations for the axial velocity and fiber radius, and equations for the radius of the bubble and the gas pressure inside the bubble. The model equations assumed that the temperature of the furnace of the drawing tower was known.
The governing equations of the bubble are hyperbolic and predict that the bubble cannot extend beyond the limiting characteristics specified by the ends of the initial bubble shape. An analysis of pinch-off was performed, and it was found that pinch-off can occur, depending on the parameters of the model, due to surface tension when the bubble radius is small.
In order to determine the evolution of a bubble, a numerical method of solution was presented. The method was used to study the evolution of two different initial bubble shapes, one convex and the other non-convex. Both initial bubble shapes had fore-aft symmetry, and it was found that the bubbles stretched and elongated severely during the drawing process. For the convex shape, fore-aft symmetry was lost in the middle of the drawing process, but the symmetry was re-gained by the end of the drawing tower. A small amount of pinch-off was observed at each end for this case, so that the final bubble length was slightly shorter than its theoretical maximum length. For the non-convex initial shape, pinch-off occurred in the middle of the bubble resulting in two bubbles by the end of the fiber draw.
The two bubbles had different final pressures and did not have fore-aft symmetry.
An extension of the fixed-mass model was considered in which the gas in the bubble was allowed to diffuse into the surrounding glass. The governing equations for this leaky-mass model were developed and manipulated into a form suitable for a numerical treatment
Plasma Edge Kinetic-MHD Modeling in Tokamaks Using Kepler Workflow for Code Coupling, Data Management and Visualization
A new predictive computer simulation tool targeting the development of the H-mode pedestal at the plasma edge in tokamaks and the triggering and dynamics of edge localized modes (ELMs) is presented in this report. This tool brings together, in a coordinated and effective manner, several first-principles physics simulation codes, stability analysis packages, and data processing and visualization tools. A Kepler workflow is used in order to carry out an edge plasma simulation that loosely couples the kinetic code, XGC0, with an ideal MHD linear stability analysis code, ELITE, and an extended MHD initial value code such as M3D or NIMROD. XGC0 includes the neoclassical ion-electron-neutral dynamics needed to simulate pedestal growth near the separatrix. The Kepler workflow processes the XGC0 simulation results into simple images that can be selected and displayed via the Dashboard, a monitoring tool implemented in AJAX allowing the scientist to track computational resources, examine running and archived jobs, and view key physics data, all within a standard Web browser. The XGC0 simulation is monitored for the conditions needed to trigger an ELM crash by periodically assessing the edge plasma pressure and current density profiles using the ELITE code. If an ELM crash is triggered, the Kepler workflow launches the M3D code on a moderate-size Opteron cluster to simulate the nonlinear ELM crash and to compute the relaxation of plasma profiles after the crash. This process is monitored through periodic outputs of plasma fluid quantities that are automatically visualized with AVS/Express and may be displayed on the Dashboard. Finally, the Kepler workflow archives all data outputs and processed images using HPSS, as well as provenance information about the software and hardware used to create the simulation. The complete process of preparing, executing and monitoring a coupled-code simulation of the edge pressure pedestal buildup and the ELM cycle using the Kepler scientific workflow system is described in this paper
Hadron Spectroscopy with COMPASS at CERN
The aim of the COMPASS hadron programme is to study the light-quark hadron
spectrum, and in particular, to search for evidence of hybrids and glueballs.
COMPASS is a fixed-target experiment at the CERN SPS and features a two-stage
spectrometer with high momentum resolution, large acceptance, particle
identification and calorimetry. A short pilot run in 2004 resulted in the
observation of a spin-exotic state with consistent with the
debated . In addition, Coulomb production at low momentum transfer
data provide a test of Chiral Perturbation Theory. During 2008 and 2009, a
world leading data set was collected with hadron beam which is currently being
analysed. The large statistics allows for a thorough decomposition of the data
into partial waves. The COMPASS hadron data span over a broad range of channels
and shed light on several different aspects of QCD.Comment: 4 pages, 5 figure
Modelling colloids with Baxter's adhesive hard sphere model
The structure of the Baxter adhesive hard sphere fluid is examined using
computer simulation. The radial distribution function (which exhibits unusual
discontinuities due to the particle adhesion) and static structure factor are
calculated with high accuracy over a range of conditions and compared with the
predictions of Percus--Yevick theory. We comment on rigidity in percolating
clusters and discuss the role of the model in the context of experiments on
colloidal systems with short-range attractive forces.Comment: 14 pages, 7 figures. (For proceedings of "Structural arrest in
colloidal systems with short-range attractive forces", Messina, December
2003
- âŠ