A modular FPGA-based ultrasonic array system for applications including non-destructive testing

This paper reports work aimed at the development of an ultrasonic imaging system comprising modular, reprogrammable building blocks, or tiles, which can be customised for multiple applications, including and within non-destructive testing (NDT), by the user. The key component is an autonomous module containing the ultrasonic array and all the electronics necessary to operate it. This contrasts with most previous research on system integration which has focused only on the transducer and front-end electronics.<p></p> In the present work, a 4 4 element 2D piezoelectric array with a 16 mm 16 mm aperture has been produced, with the entire transmission and reception electronics within the same footprint. The proximity of the transducer array and electronics removes the need for cabling, reducing signal degradation due to cross talk and interference. In addition, it avoids the problem of electrical impedance matching of cable between the array elements and the electronics. <p></p> Pulse-echo insertion loss of 48 dB has been measured from back-wall reflections in 73 mm-thick aluminium without decoding, and results with decoded signals show adequate signal-to-noise ratio (SNR) with 3.3 V excitation at an operating frequency of 1.2 MHz, within the range required for deep penetration in nuclear power plant. <p></p> Crucially, the ability to construct 2D arrays of any size and shape from generic building blocks represents a departure from almost all previous work in ultrasound, which has traditionally been highly application specific. This may allow ultrasonic NDT to be used in applications for which the investment in customised devices could not previously be justified. <p></p&gt

Interactive manipulation of microparticles in an octagonal sonotweezer

An ultrasonic device for micro-patterning and precision manipulation of micrometre-scale particles is demonstrated. The device is formed using eight piezoelectric transducers shaped into an octagonal cavity. By exciting combinations of transducers simultaneously, with a controlled phase delay between them, different acoustic landscapes can be created, patterning micro-particles into lines, squares, and more complex shapes. When operated with all eight transducers the device can, with appropriate phase control, manipulate the two dimensional acoustic pressure gradient; it thus has the ability to position and translate a single tweezing zone to different locations on a surface in a precise and programmable manner

Dynamic acoustic field activated cell separation (DAFACS)

Advances in diagnostics, cell and stem cell technologies drive the development of application-specific tools for cell and particle separation. Acoustic micro-particle separation offers a promising avenue for highthroughput, label-free, high recovery, cell and particle separation and isolation in regenerative medicine. Here, we demonstrate a novel approach utilizing a dynamic acoustic field that is capable of separating an arbitrary size range of cells. We first demonstrate the method for the separation of particles with different diameters between 6 and 45 μm and secondly particles of different densities in a heterogeneous medium. The dynamic acoustic field is then used to separate dorsal root ganglion cells. The shearless, label-free and low damage characteristics make this method of manipulation particularly suited for biological applications. Advantages of using a dynamic acoustic field for the separation of cells include its inherent safety and biocompatibility, the possibility to operate over large distances (centimetres), high purity (ratio of particle population, up to 100%), and high efficiency (ratio of separated particles over total number of particles to separate, up to 100%)

Relinquishing Control: What Romanian De Se Attitude Reports Teach Us About Immunity To Error Through Misidentification

Higginbotham argued that certain linguistic items of English, when used in indirect discourse, necessarily trigger first-personal interpretations. They are: the emphatic reflexive pronoun and the controlled understood subject, represented as PRO. PRO is special, in this respect, due to its imposing obligatory control effects between the main clause and its subordinates ). Folescu & Higginbotham, in addition, argued that in Romanian, a language whose grammar doesn’t assign a prominent role to PRO, de se triggers are correlated with the subjunctive mood of certain verbs. That paper, however, didn’t account for the grammatical diversity of the reports that display immunity to error through misidentification in Romanian: some of these reports are expressed by using de se triggers; others are not. Their IEM, moreover, is not systematically lexically controlled by the verbs, via their theta-roles; it is, rather, determined by the meaning of the verbs in question. Given the data from Romanian, I will argue, the phenomenon of IEM cannot be fully explained starting either from the syntactical or the lexical structure of a language

MOSAIC: A Scalable reconfigurable 2D array system for NDT

This paper documents the development of a scalable 2D array system, or Mosaic that can be targeted at a wide range of NDT applications by way of a reconfigurable tile that can be tessellated to form arrays of any size and shape. Close coupling permits utilization of excitation voltages as low as +/-3.3V with insertion loss of 48dB on reflection from an aluminum back wall at 73mm achieved using 2D arrays without decoding

Estimating and comparing the direct economic contributions of reef fisheries and tourism in the Asia-Pacific

Global estimates of the economic value of coral reefs have been made using benefit transfer and other valuation methods, but it is unclear whether these estimates match actualized values (e.g. market values of reef fish and reef tourism) or how they scale to specific regions. Here we empirically estimated the (actualized) direct economic contribution of fishing and tourism on coral reefs (i.e., direct use values) in the Asia-Pacific (APAC) region, which includes a majority (∼80%) of the global reef area. We found that coral reefs in the APAC region directly contributed $25 billion annually on average over the years 2008–2012 to the region’s economy from fishing and tourism alone. The majority of direct economic contributions (US$19.5 billion) was provided by reef tourism, while the remainder was divided between artisanal (US$2.4 billion) and industrial (US$3.2 billion) fisheries. The average economic productivity of coral reefs was estimated at US$112,000 per square kilometer of coral reef, although there were large deviations between countries in terms of economic utilization of their reefs. Our findings suggest that a highly-cited prior estimate of the global potential value of coral reefs (Cesar et al., 2003) is likely a significant underestimation of actual economic contributions. We discuss some of the implications for reef management. Most notably, our results indicate that the non-consumptive direct use of reef resources provide substantially more economic benefits than consumptive uses

Microeconomic adaptation to severe climate disturbances on Australian coral reefs

Coral reefs are increasingly affected by climate-induced disturbances that are magnified by increasing ocean temperatures. Loss of coral reefs strongly affects people whose livelihoods and wellbeing depend on the ecosystem services reefs provide. Yet the effects of coral loss and the capacity of people and businesses to adapt to it are poorly understood, particularly in the private sector. To address this gap, we surveyed about half (57 of 109) of Australian reef tourism operators to understand how they were affected by and responded to severe impacts from bleaching and cyclones. Reef restoration and spatial diversification were the primary responses to severe bleaching impacts, while for cyclone-impacts coping measures and product diversification were more important. Restoration responses were strongly linked to the severity of impacts. Our findings provide empirical support for the importance of response diversity, spatial heterogeneity, and learning for social-ecological resilience

Silicon mirror suspensions for gravitational wave detectors

One of the most significant limits to the sensitivity of current, and future, long-baseline interferometric gravitational wave detectors is thermal displacement noise of the test masses and their suspensions. This paper reports results of analytical and experimental studies of the limits to thermal noise performance of cryogenic silicon test mass suspensions set by two constraints on suspension fibre dimensions: the minimum dimensions required to allow conductive cooling for extracting incident laser beam heat deposited in the mirrors; and the minimum dimensions of fibres (set by their tensile strength) which can support test masses of the size envisaged for use in future detectors. We report experimental studies of breaking strength of silicon ribbons, and resulting design implications for the feasibility of suspension designs for future gravitational wave detectors using silicon suspension fibres. We analyse the implication of this study for thermal noise performance of cryogenically cooled silicon suspensions

The first Suzaku observation of SGR 1806-20

The soft gamma-ray repeater SGR 1806-20 has been attracting a lot of attention owing to the fact that in December 2004 it emitted the most powerful giant flare ever observed. Here we present the results of the first Suzaku observation of SGR 1806-20, that seems to have reached a state characterized by a flux close to the pre-flare level and by a relatively soft spectrum. Despite this, the source remained quite active, as testified by several short bursts observed by Suzaku. We discuss the broadband spectral properties of SGR 1806-20 in the context of the magnetar model, considering its recent theoretical developments.Comment: 3 pages, 1 figure. Proceedings of the conference "40 Years of Pulsars, Millisecond Pulsars, Magnetars and More", Montreal, August 12-17 2007. AIP, in pres