Interactive manipulation of microparticles in an octagonal sonotweezer

An ultrasonic device for micro-patterning and precision manipulation of micrometre-scale particles is demonstrated. The device is formed using eight piezoelectric transducers shaped into an octagonal cavity. By exciting combinations of transducers simultaneously, with a controlled phase delay between them, different acoustic landscapes can be created, patterning micro-particles into lines, squares, and more complex shapes. When operated with all eight transducers the device can, with appropriate phase control, manipulate the two dimensional acoustic pressure gradient; it thus has the ability to position and translate a single tweezing zone to different locations on a surface in a precise and programmable manner

Independent trapping and manipulation of microparticles using dexterous acoustic tweezers

An electronically controlled acoustic tweezer was used to demonstrate two acoustic manipulation phenomena: superposition of Bessel functions to allow independent manipulation of multiple particles and the use of higher-order Bessel functions to trap particles in larger regions than is possible with first-order traps. The acoustic tweezers consist of a circular 64-element ultrasonic array operating at 2.35MHz which generates ultrasonic pressure fields in a millimeter-scale fluid-filled chamber. The manipulation capabilities were demonstrated experimentally with 45 and 90-lm-diameter polystyrene spheres. These capabilities bring the dexterity of acoustic tweezers substantially closer to that of optical tweezers

Well-being of Parents of Children Who Are Deaf or Hard of Hearing

Purpose: The purpose of this study was to explore factors influencing the well-being of parents who have children who are deaf or hard of hearing (DHH) and to compare their experiences to non-clinical samples. Method: A cross-sectional online survey was used to collect data (N = 296). Results: Data analyses revealed the majority of parents of children who are DHH were functioning similarly to or better than the non-clinical samples in our comparison and within the non-clinical range for the included measures. No relationship was found between factors related to child age or timing of services (age at diagnosis, time between diagnosis and amplification fitting, age fit with hearing technology, child’s current age) and parent psychosocial functioning. Conclusions: While most parents are likely to be functioning well, knowing when a parent is experiencing challenges has important implications for clinical practice, including supporting parents in finding solutions when sub-optimal daily intervention practices are occurring. Audiologists can incorporate strategies to identify parents that may be experiencing challenges into their routine practice

Size Gap for Zero Temperature Black Holes in Semiclassical Gravity

We show that a gap exists in the allowed sizes of all zero temperature static spherically symmetric black holes in semiclassical gravity when only conformally invariant fields are present. The result holds for both charged and uncharged black holes. By size we mean the proper area of the event horizon. The range of sizes that do not occur depends on the numbers and types of quantized fields that are present. We also derive some general properties that both zero and nonzero temperature black holes have in all classical and semiclassical metric theories of gravity.Comment: 4 pages, ReVTeX, no figure

Growth and texture of Spark Plasma Sintered Al2O3 ceramics: a combined analysis of X-rays and Electron Back Scatter Diffraction

Textured alumina ceramics were obtained by Spark Plasma Sintering (SPS) of undoped commercial a-Al2O3 powders. Various parameters (density, grain growth, grain size distribution) of the alumina ceramics, sintered at two typical temperatures 1400{\deg}C and 1700{\deg}C, are investigated. Quantitative textural and structural analysis, carried out using a combination of Electron Back Scattering Diffraction (EBSD) and X-ray diffraction (XRD), are represented in the form of mapping, and pole figures. The mechanical properties of these textured alumina ceramics include high elastic modulus and hardness value with high anisotropic nature, opening the door for a large range of applicationsComment: 16 pages, 6 figures, submitted to J. Appl. Phy

Osteocyte dysfunction promotes osteoarthritis through MMP13-dependent suppression of subchondral bone homeostasis.

Osteoarthritis (OA), long considered a primary disorder of articular cartilage, is commonly associated with subchondral bone sclerosis. However, the cellular mechanisms responsible for changes to subchondral bone in OA, and the extent to which these changes are drivers of or a secondary reaction to cartilage degeneration, remain unclear. In knee joints from human patients with end-stage OA, we found evidence of profound defects in osteocyte function. Suppression of osteocyte perilacunar/canalicular remodeling (PLR) was most severe in the medial compartment of OA subchondral bone, with lower protease expression, diminished canalicular networks, and disorganized and hypermineralized extracellular matrix. As a step toward evaluating the causality of PLR suppression in OA, we ablated the PLR enzyme MMP13 in osteocytes while leaving chondrocytic MMP13 intact, using Cre recombinase driven by the 9.6-kb DMP1 promoter. Not only did osteocytic MMP13 deficiency suppress PLR in cortical and subchondral bone, but it also compromised cartilage. Even in the absence of injury, osteocytic MMP13 deficiency was sufficient to reduce cartilage proteoglycan content, change chondrocyte production of collagen II, aggrecan, and MMP13, and increase the incidence of cartilage lesions, consistent with early OA. Thus, in humans and mice, defects in PLR coincide with cartilage defects. Osteocyte-derived MMP13 emerges as a critical regulator of cartilage homeostasis, likely via its effects on PLR. Together, these findings implicate osteocytes in bone-cartilage crosstalk in the joint and suggest a causal role for suppressed perilacunar/canalicular remodeling in osteoarthritis

Investigating the Solubility and Cytocompatibility of CaO-Na2O-SiO2/TiO2 Bioactive Glasses

This study aims to investigate the solubility of a series of titanium (TiO2)-containing bioactive glasses and their subsequent effect on cell viability. Five glasses were synthesized in the composition range SiO2-Na2O-CaO with 5 mol % of increments TiO2 substituted for SiO2. Glass solubility was investigated with respect to (1) exposed surface area, (2) particle size, (3) incubation time, and (4) compositional effects. Ion release profiles showed that sodium (Na+) presented high release rates after 1 day and were unchanged between 7 and 14 days. Calcium (Ca2+) release presented a significant change at each time period and was also composition dependent, where a reduction in Ca2+ release is observed with an increase in TiO2 concentration. Silica (Si4+) release did not present any clear trends while no titanium (Ti4+) was released. Cell numbers were found to increase up to 44%, compared to the growing control population, with a reduction in particle size and with the inclusion of TiO2 in the glass composition

Ozone depletion potential of CH_3Br

The ozone depletion potential (ODP) of methyl bromide (CH_3Br) can be determined by combining the model‐calculated bromine efficiency factor (BEF) for CH_3Br and its atmospheric lifetime. This paper examines how changes in several key kinetic data affect BEF. The key reactions highlighted in this study include the reaction of BrO + HO_2, the absorption cross section of HOBr, the absorption cross section and the photolysis products of BrONO_2, and the heterogeneous conversion of BrONO_2 to HOBr and HNO_3 on aerosol particles. By combining the calculated BEF with the latest estimate of 0.7 year for the atmospheric lifetime of CH_3Br, the likely value of ODP for CH_3Br is 0.39. The model‐calculated concentration of HBr (∼0.3 pptv) in the lower stratosphere is substantially smaller than the reported measured value of about 1 pptv. Recent publications suggested models can reproduce the measured value if one assumes a yield for HBr from the reaction of BrO + OH or from the reaction of BrO + HO_2. Although the DeMore et al. [1997] evaluation concluded any substantial yield of HBr from BrO + HO_2 is unlikely, for completeness, we calculate the effects of these assumed yields on BEF for CH_3Br. Our calculations show that the effects are minimal: practically no impact for an assumed 1.3% yield of HBr from BrO + OH and 10% smaller for an assumed 0.6% yield from BrO + HO_2