Famílies botàniques de plantes medicinals

Facultat de Farmàcia, Universitat de Barcelona. Ensenyament: Grau de Farmàcia, Assignatura: Botànica Farmacèutica, Curs: 2013-2014, Coordinadors: Joan Simon, Cèsar Blanché i Maria Bosch.Els materials que aquí es presenten són els recull de 175 treballs d’una família botànica d’interès medicinal realitzats de manera individual. Els treballs han estat realitzat per la totalitat dels estudiants dels grups M-2 i M-3 de l’assignatura Botànica Farmacèutica durant els mesos d’abril i maig del curs 2013-14. Tots els treballs s’han dut a terme a través de la plataforma de GoogleDocs i han estat tutoritzats pel professor de l’assignatura i revisats i finalment co-avaluats entre els propis estudiants. L’objectiu principal de l’activitat ha estat fomentar l’aprenentatge autònom i col·laboratiu en Botànica farmacèutica

Multiresidue method for the determination of high production volume plastic additives in river waters

The aim of this study was to develop a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS)-based method for the multiresidue analysis of 21 plastic additives in river water. Analysed compounds included phthalates, benzophenone, bisphenol A and long- and short-chain alkylphenols (APs), which are of relevance because most of them are high production volume chemicals largely used in the plastic industry. These compounds can reach river waters due to direct discharge from wastewater treatment plants and leaching from plastic materials and microplastics present in rivers. In a first step, ionisation and acquisition parameters were optimised to obtain high sensitivity and structural information. Then, different solid-phase extraction cartridges and elution conditions were tested using Milli-Q and river water. With the optimised conditions, quality control parameters (recoveries, limits of detection, intra- and inter-day variability and blank contribution) proved that the method was accurate and selective for the trace monitoring of these compounds in river water. For nonylphenol, octylphenol and bis(2-ethylhexyl)phthalate, included in the Water Framework Directive, limits of detection were below environmental quality standard concentrations considering blank contributions. All other compounds were efficiently detected at trace levels, and focus was given to o- and p-substituted and di- and tri-substituted APs, which are first reported in the present study. A pilot survey was finally carried out to determine the occurrence of plastic additives in river waters surrounding the city of Barcelona

Occurrence, toxicity and risk assessment of plastic additives in Besos river, Spain

The objective of the present study is to evaluate the presence, seasonal variability and impact of plastic additives along the Besos river basin (Catalonia, Spain). This river flows through a highly urbanized and industrialized area with discharge of >25 Wastewater Treatment Plants (WWTPs) and with large amounts of floating plastics. Compounds studied included 5 phthalates, its substitutes acetyl tributyl citrate (ATBC) and bis(2-ehtylhexyl) adipate, 12 long and short chain alkylphenols, bisphenol A and benzophenone, most of them high volume production chemicals. High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS) was used to determine ng/L concentrations. Toxicity evaluation was performed for each individual compound using Daphnia magna as test organism and it was found that the effect concentration (EC50) decreased with increasing octanol-water partition coefficients. The EC50 values calculated and Measured Environmental Concentrations were used to determine the risk quotients. Only diethylhexylphthalate, nonylphenol and octylphenol, with median concentrations from 41.9 to 826 ng/L, caused a small risk mostly in downstream waters with 50-75% of the samples overpassing the Environmental Quality Standards set by the European Union. Seasonal variations were observed with higher levels in summer due to low water flows. WWTPs effluents and leaching from floating plastics or microplastics were presumably main sources of pollution.This work has been financed by the Ministry of Science and Innovation of Spain under the project PID 2019-105732 GB-C21.Peer reviewe

Coupled triple phase boundary processes: Liquid–liquid generator–collector electrodes

Electrochemical processes at liquid–liquid–electrode interfaces involve simultaneous ion transfer and electron transfer. When driven at triple phase boundary electrode systems, electron and ion transfer occur in the same interfacial reaction zone. In this report, preliminary work with a novel electrode system based on two coupled triple phase boundary reaction zones is described. An interdigitated gold band array with 7 µm gold bands separated by 13 µm gaps is employed immersed in aqueous electrolyte with a water-immiscible solution of the redox system N,N-diethyl-N'N'-didodecyl-phenylenediamine (DDPD) in 4-(3-phenylpropyl)-pyridine (PPP) immobilized on the surface. Well-defined generator–collector feedback currents are observed which depend on the volume of deposit, the concentration of the redox system, and the nature of the aqueous electrolyte

Evaluation of a lime-mediated sewage sludge stabilisation process. Product characterisation and technological validation for its use in the cement industry

This paper describes an industrial process for stabilising sewage sludge (SS) with lime and evaluates the viability of the stabilised product, denominated Neutral, as a raw material for the cement industry. Lime not only stabilised the sludge, raised the temperature of the mix to 80–100 C, furthering water evaporation, portlandite formation and the partial oxidation of the organic matter present in the sludge. Process mass and energy balances were determined. Neutral, a white powder consisting of portlandite (49.8%), calcite (16.6%), inorganic oxides (13.4%) and organic matter and moisture (20.2%), proved to be technologically apt for inclusion as a component in cement raw mixes. In this study, it was used instead of limestone in raw mixes clinkerised at 1400, 1450 and 1500 C. These raw meals exhibited greater reactivity at high temperatures than the limestone product and their calcination at 1500 C yielded clinker containing over 75% calcium silicates, the key phases in Portland clinker. Finally, the two types of raw meal (Neutral and limestone) were observed to exhibit similar mineralogy and crystal size and distribution.Peer Reviewe

Evaluation of a lime-mediated sewage sludge stabilisation process. Product characterisation and technological validation for its use in the cement industry

This paper describes an industrial process for stabilising sewage sludge (SS) with lime and evaluates the viability of the stabilised product, denominated Neutral, as a raw material for the cement industry. Lime not only stabilised the sludge, raised the temperature of the mix to 80–100 C, furthering water evaporation, portlandite formation and the partial oxidation of the organic matter present in the sludge. Process mass and energy balances were determined. Neutral, a white powder consisting of portlandite (49.8%), calcite (16.6%), inorganic oxides (13.4%) and organic matter and moisture (20.2%), proved to be technologically apt for inclusion as a component in cement raw mixes. In this study, it was used instead of limestone in raw mixes clinkerised at 1400, 1450 and 1500 C. These raw meals exhibited greater reactivity at high temperatures than the limestone product and their calcination at 1500 C yielded clinker containing over 75% calcium silicates, the key phases in Portland clinker. Finally, the two types of raw meal (Neutral and limestone) were observed to exhibit similar mineralogy and crystal size and distribution.Peer Reviewe