104 research outputs found
Viscoelastic Characterization and Degradation Stability Investigation of Poly(butylene-adipate-co-terephthalate) â Calcium-Phosphate Glass Composites
Analysis and modelling of damage mechanism in FDM 3Dprinted Lattice structure during compression loading
Fused Deposition Modeling (FDM), also known as fused filament fabrication, is a widely spread 3D printing process
that uses a continuous filament of a thermoplastic material. In this work, the anisotropy of cellular âopen-cellâ structures printed in
ABS by the FDM technology is studied and a model of mechanical response up to the damage regime is tried. The present investigation
starts from the analysis of the anisotropic effect due to the directional material deposition, which is preliminary studied on
simple prismatic samples at various filament orientations. Then, the research goes through the observation of damage at the microscale
of a sample cell structure loaded in compression, and tries to reproduce the anisotropy at both elastic and plastic regimes by
FE modelling in ABAQUS© environment
Printing and characterization of 3D high-loaded nanocomposites structures
Additive Manufacturing (AM) technologies are spreading rapidly both
in academic research and industrial environments [1]. Nanomaterials
have proven to provide new size-dependent properties compared to
traditional bulk materials [2]. The integration of nanotechnology into
AM opens new and interesting challenges in manufacturing advanced
nanocomposite materials with custom-made properties and geometries
[3]. Synergy between nanomaterials, such as metal and oxide
nanoparticles, and AM can in fact result in improved functional and
structural performance of manufactured devices, filling the gap
between design and production of a specific tool. For instance, silica nanoparticles (SiO2 NPs) are
increasingly used as nanofillers, thanks to their excellent mechanical properties, to fabricate
nanocomposites used in a wide range of applications [4]. Stereolithography (SLA) represents one of
the most widespread AM technologies used to fabricate 3D engineered structures. The general
procedure for building objects with SLA involves photo-polymerization of liquid monomer into
solid resin by means of an ultraviolet (UV) laser, which creates targeted cross-linked regions where
the light irradiates the matrix [5]. SLA AM of nanocomposites usually involves mixing of ex situ
synthesized nanoparticles with commercially available acrylic monomers, followed by an optimized
printing process. Stable dispersion of colloidal SiO2 NPs in acrylate monomers or oligomers are
commercially available, such as Nanocryl product family commercialized by Evonik. These
products are traditionally used in adhesive and electronic applications, such as highly scratchresistant
coatings for fiber optic cables, conformal coatings, UV curing adhesives for printed circuit
boards and can be successfully employed in AM of high-loaded nanocomposites. The produced 3Dprinted
specimens were employed to characterize the nanocomposites microstructure and thermomechanical
properties respectively by means of scanning electron microscopy (SEM) and dynamicmechanical
analyses (DMA)
Special Resins for Stereolithography: In Situ Generation of Silver Nanoparticles
The limited availability of materials with special properties represents one of the main limitations to a wider application of polymer-based additive manufacturing technologies. Filled resins are usually not suitable for vat photo-polymerization techniques such as stereolithography (SLA) or digital light processing (DLP) due to a strong increment of viscosity derived from the presence of rigid particles within the reactive suspension. In the present paper, the possibility to in situ generate silver nanoparticles (AgNPs) starting from a homogeneous liquid system containing a well dispersed silver salt, which is subsequently reduced to metallic silver during stereolithographic process, is reported. The simultaneous photo-induced cross-linking of the acrylic resin produces a filled thermoset resin with thermal-mechanical properties significantly enhanced with respect to the unfilled resin, even at very low AgNPs concentrations. With this approach, the use of silver salts having carbon-carbon double bonds, such as silver acrylate and silver methacrylate, allows the formation of a nanocomposite structure in which the release of by-products is minimized due to the active role of all the reactive components in the three dimensional (3D)-printing processes. The synergy, between this nano-technology and the geometrical freedom offered by SLA, could open up a wide spectrum of potential applications for such a material, for example in the field of food packaging and medical and healthcare sectors, considering the well-known antimicrobial effects of silver nanoparticles
Pullout behavior of polypropylene macro-synthetic fibers treated with nano-silica
A study of the effects of nano-silica treatment on the bonding properties of macro synthetic polypropylene fibers embedded in a cement matrix is provided in the present paper as a step to improve interfacial properties of the fiber reinforced cementitious composites (FRCC). Polypropylene fibers were treated by sol\u2013gel technique, allowing to obtain a nano-silica coating. Scanning electron microscopy was used to
observe the morphological features of PP fibers surfaces before and after the pullout test. The effects of the treatment were investigated by comparative pullout tests on treated and untreated fibers. An increase in maximum load and energy necessary for the complete extraction of the fiber was observed, as a consequence of the improvement of the interface properties due to the nano-silica hydration activity.
These two parameters control the crack-resistance and ductility properties of FRCC and are deeply affected by bonding and friction phenomena. The hydration products act as chemical and physical anchors, thus producing a densification of the interface transition zone (ITZ). The abrasion phenomena occurring on the fiber surface during the pullout test are responsible of hardening behavior, consisting in the
increase in the frictional shear stress with the fiber slip and thus in the energy required for fiber extraction
Fracture behavior of concretes containing MSWI vitrified bottom ash
The incorporation of waste materials into concrete allows responding to some of the most significant issues of our society: waste
management and climate change. Experimental studies carried out in last decades have shown that municipal solid waste
incineration (MSWI) ash, and particularly bottom ash, which constitutes the major solid by-product of incineration process, can be
adopted to produce building materials. However, several issues are related to the safety and the environmental impact of MSWI
ash utilization for concrete production, mainly linked with the leaching of heavy metals and toxic organic components. To solve
these problems, several treatments for MSWI ash can be adopted and, among them, in this work the attention was focused on
vitrification technology, which enables to convert the ash in a glassy inert solid material. The aim of the present paper is to study
the feasibility of developing a âgreen concreteâ that incorporates vitrified MSWI bottom ash as partial cement replacement, so
reducing the cement content and consequently the carbon dioxide emissions as well as the raw materials consumption related to its
production. The vitrified MSWI bottom ash, ground at micrometer size, was inserted into the admixtures by considering two
percentages of cement substitution (10% and 20% by weight of cement). The flexural behavior of concrete containing vitrified
MSWI ash was investigated through three-point bending tests under crack mouth opening displacement control. The crack path
evolution was further explored by adopting the Digital Image Correlation technique. By analyzing the obtained results, it can be
concluded that the use into concrete of vitrified MSWI bottom ash as cement replacement up to a percentage of 20% by weight of
cement, allows reaching comparable flexural resistances with respect to the reference concrete. So, the proposed approach can
represent a viable solution for the development of environmental-friendly concretes able to reduce the environmental impact of the
concrete industry, which is mostly related to cement production, as known
Novel PBATâBased Biocomposites Reinforced with Bioresorbable Phosphate Glass Microparticles
Biocomposites based on poly(butylene adipate terephthalate) (PBAT) and reinforced with micro-particles of inorganic biodegradable phosphate glass
(PG) at 2, 10, and 40 wt% are prepared and characterized from a mechanical and morphological point of view. Scanning electron microscope (SEM) images show a good dispersion of the PG micro-grains, even at high concentrations, in the PBAT matrix, resulting in homogeneous composites. Tensile and dynamic-mechanical tests, respectively, indicate that Youngâs and storage moduli increase with PG concentration. The reinforcement of PBAT aims at modifying and tailoring the mechanical and viscoelastic properties of the material to expand its application field especially in the food and agricultural packaging sector, thanks to the similarity of PBAT performance with polyethylene
Preparation and characterization of innovative poly(butylene adipate terephthalate)âbased biocomposites for agriâfood packaging application
The present work reports on the preparation and subsequent mechanical, morphological and thermal characterization of composites based on poly(butylene adipate terephthalate) (PBAT), reinforced with micro-particles of inorganic bioabsorbable calcium-phosphate glass (CPG) at different contents up to 40 wt%. The PBAT-CPG composites were prepared by solvent casting. The resulting composite pellets were used for the injection molding of model 1BA specimens, according to standard UNI EN ISO 527. PBAT-CPG composites displayed an effective increase of the Young's modulus (E) up to 82% compared to the pristine polymer, while showing a reduction of the yield stress (Ïy) up to 20%, of the stress at break (ÏB) up to 46%, of the strain at break (ΔB) up to 57% and of the toughness (T) up to 72%. The values of E, Ïy and ÏB were also compared and validated with theoretical values calculated using Kerner's and Pukanszky's models. Scanning electron microscopy (SEM) images display homogeneous dispersion and distribution of the filler particles in the polymer matrix with no aggregates or phase separation that would cause a deterioration of the material properties. Infrared (IR) spectroscopy did not show structural variations of the polymer matrix due to the CPG presence. The oxygen permeability in PBAT-based samples assumes significantly lower values when benchmarked with the permeability of low-density polyethylene (LDPE). Among the different composites, a decrease in oxygen permeability is observed as the CPG concentration increases. Regarding water vapor permeability, PBAT-based samples show a lower barrier effect than polyethylene (PE): in particular, permeability to water vapor assumes an increasing trend as the quantity of filler increases. The tuneable degradation of the final composite materials was defined by the disintegration degree (DD) determination under composting conditions in a laboratory-scale reactor. The developed materials prove to be valid biodegradable and eco-friendly alternatives to traditional thermoplastic polymers, such as LDPE, and can be applied in many fields, especially in package and mulch film applications
Preparation and characterization of innovative poly(butylene adipate terephthalate)-based biocomposites for agri-food packaging application
The present work reports on the preparation and subsequent mechanical, morphological and thermal characterization of composites based on poly(butylene adipate terephthalate) (PBAT), reinforced with micro-particles of inorganic bioabsorbable calcium-phosphate glass (CPG) at different contents up to 40 wt%. The PBAT-CPG composites were prepared by solvent casting. The resulting composite pellets were used for the injection molding of model 1BA specimens, according to standard UNI EN ISO 527. PBAT-CPG composites displayed an effective increase of the Young's modulus (E) up to 82% with respect to the pristine polymer, while showing a reduction of the yield stress (Ïy) up to 20%, of the stress at break (ÏB) up to 46%, of the strain at break (ΔB) up to 57% and of the toughness (T) up to 72%. The values of E, Ïy and ÏB were also compared and validated with theoretical values calculated using Kernerâs and Pukanszkyâs models. Scanning electron microscopy (SEM) images display homogeneous dispersion and distribution of the filler particles in the polymer matrix with no aggregates or phase separation that would cause a deterioration of the material properties. Infrared (IR) spectroscopy did not show structural variations of the polymer matrix due to the CPG presence. The oxygen permeability in PBAT-based samples assumes significantly lower values when benchmarked with the permeability of low-density polyethylene (LDPE). Among the different composites, a decrease in oxygen permeability is observed as the CPG concentration increases. Regarding water vapor permeability, PBAT-based samples show a lower barrier effect than PE: in particular, permeability to water vapor assumes an increasing trend as the quantity of filler increases. The tuneable degradability of the final composite materials was defined by the disintegration degree (DD) determination under composting conditions in a laboratory-scale reactor. The developed materials prove to be valid biodegradable and eco-friendly alternatives to traditional thermoplastic polymers, such as LDPE, and can be applied in many fields, especially in package and mulch film applications
Design of Mechanical Properties of Poly(butylene-adipate-terephthalate) Reinforced with Zein-TiO2 Complex
Mechanical properties of polymer biocomposites are influenced by the interaction between thematrix and the filler surface. In this work, composites based on poly(butylene-adipate-terephthalate) (PBAT) filled with micrometric particles of zein-TiO2 complex (ZTC) were realized via solvent casting technique at different concentrations, equal to 0, 5, 10, and 20 wt%. After pelletization, the resulting materials were injection molded into standard specimens, employed for the uniaxial tensile test (UTT) characterization. From the stress-strain curves, Youngâs modulus (E), yield stress (Ïy), stress at break (ÏB), elongation at break (ΔB), and toughness (T) were collected. The addition of the ZTC proved to show a reinforcing effect on the polymeric matrix, with an increase in both E and Ïy. Modelling of the mechanical properties was performed by applying Kernerâs and PukĂĄnszkyâs equations. Kernerâs model, applied on experimental E values, returned a very good correspondence between collected and theoretical values. From the application of PukĂĄnszkyâs model to Ïy, the obtained B value showed a good interfacial interaction between the matrix and the filler. Due to the enhanced stiffness of the composites, a reduction in the true stress at break (ÏT,B) was observed. The modified PukĂĄnszkyâs model gave a B value lower than the one obtained for the yield, but still in the range of acceptable values for microcomposites
- âŠ