662 research outputs found
Positronium signature in organic liquid scintillators for neutrino experiments
Electron anti-neutrinos are commonly detected in liquid scintillator
experiments via inverse beta decay, by looking at the coincidence between the
reaction products, neutron and positron. Prior to positron annihilation, an
electron-positron pair may form an orthopositronium (o-Ps) state, with a mean
life of a few ns. Even if the o-Ps decay is speeded up by spin flip or pick off
effects, it may introduce distortions in the photon emission time distribution,
crucial for position reconstruction and pulse shape discrimination algorithms
in anti-neutrino experiments. Reversing the problem, the o-Ps induced time
distortion represents a new signature for tagging anti-neutrinos in liquid
scintillator.
In this paper, we report the results of measurements of the o-Ps formation
probability and lifetime, for the most used solvents for organic liquid
scintillators in neutrino physics (pseudocumene, linear alkyl benzene,
phenylxylylethane, and dodecane). We characterize also a mixture of
pseudocumene +1.5 g/l of 2,5-diphenyloxazole, a fluor acting as wavelength
shifter.
In the second part of the paper, we demonstrate that the o-Ps induced
distortion of the scintillation photon emission time distributions represent an
optimal signature for tagging positrons on an event by event basis, potentially
enhancing the anti-neutrino detection.Comment: 6 pages, 9 figure
A new anti-neutrino detection technique based on positronium tagging with plastic scintillators
The main signature for anti-neutrino detection in reactor and geo-neutrino
experiments based on scintillators is provided by the space-time coincidence of
positron and neutron produced in the Inverse Beta Decay reaction. Such a
signature strongly suppresses backgrounds and allows for measurements performed
underground with a relatively high signal-to-background ratio. In an
aboveground environment, however, the twofold coincidence technique is not
sufficient to efficiently reject the high background rate induced by cosmogenic
events. Enhancing the positron-neutron twofold coincidence efficiency has the
potential to pave the way future aboveground detectors for reactor monitoring.
We propose a new detection scheme based on a threefold coincidence, between the
positron ionization, the ortho-positronium (o-Ps) decay, and the neutron
capture, in a sandwich detector with alternated layers of plastic scintillator
and aerogel powder. We present the results of a set of dedicated measurements
on the achievable light yield and on the o-Ps formation and lifetime. The
efficiencies for signal detection and background rejection of a preliminary
detector design are also discussed.Comment: 18 pages, 10 figure
Measurement of ortho-Positronium Properties in Liquid Scintillators
Pulse shape discrimination in liquid scintillator detectors is a
well-established technique for the discrimination of heavy particles from light
particles. Nonetheless, it is not efficient in the separation of electrons and
positrons, as they give rise to indistinguishable scintillator responses. This
inefficiency can be overtaken through the exploitation of the formation of
ortho-Positronium (o-Ps), which alters the time profile of light pulses induced
by positrons.
We characterized the o-Ps properties in the most commonly used liquid
scintillators, i.e. PC, PXE, LAB, OIL and PC + PPO. In addition, we studied the
effects of scintillator doping on the o-Ps properties for dopants currently
used in neutrino experiments, Gd and Nd. Further measurements for Li-loaded and
Tl-loaded liquid scintillators are foreseen. We found that the o-Ps properties
are suitable for enhancing the electron-positron discrimination.Comment: 4 pages, 1 figure. Contribution to proceedings of the Low
Radioactivity Techniques 2013 Workshop at LNGS, Assergi (AQ), Italy, April
10-12 201
Positronium confinement in small cavities : a two-particle model for the lowering of contact density
Positronium (Ps) is widely used as a probe for studying nanometric porosities in condensed matter. Accessible experimental measurements concern annihilation rates by pickoff processes and contact densities (the electron density at the positron position). Existing models for describing Ps properties in small cavities do not justify the lowering of the contact density with respect to that of Ps in vacuum, as found in most materials. We formulate a two-particle model in which only the electron is confined in the cavity, while the positron is moving freely and feels the medium via a positive work function. Our calculation fully explains experimental data for a large class of materials and suggests a way to gain information on pore sizes and positron work functions
Preparation of a sepia melanin and poly(ethylene-alt-maleic anhydride) hybrid material as an adsorbent for water purification
Meeting the increasing demand of clean water requires the development of novel efficient adsorbent materials for the removal of organic pollutants. In this context the use of natural, renewable sources is of special relevance and sepia melanin, thanks to its ability to bind a variety of organic and inorganic species, has already attracted interest for water purification. Here we describe the synthesis of a material obtained by the combination of sepia melanin and poly(ethylene-alt-maleic anhydride) (P(E-alt-MA)). Compared to sepia melanin, the resulting hybrid displays a high and fast adsorption efficiency towards methylene blue (a common industrial dye) for a wide pH range (from pH 2 to 12) and under high ionic strength conditions. It is easily recovered after use and can be reused up to three times. Given the wide availability of sepia melanin and P(E-alt-MA), the synthesis of our hybrid is simple and affordable, making it suitable for industrial water purification purposes
Swelling of positronium confined in a small cavity
The electron density at the positron (contact density) in the ground state positronium (Ps) formed in condensed matter is generally found to be lower than in vacuum. This is usually attributed to microscopic electric fields which polarize Ps, by acting on the two particles of the atom. In this paper we quantitatively investigate an opposite effect. It is due to the confinement of Ps in small cavities existing in the host solid (e.g. free volume in polymers), which increases the contact density. Although this phenomenon is greater, the smaller is the size of the cavity, Ps polarization seems to play anyway a predominant role
Tuning the Interlayer Distance of Graphene Oxide as a Function of the Oxidation Degree for o-Toluidine Removal
Graphene oxide (GO) with different oxidation degrees is prepared by a modified Hummers' method varying KMnO4 amount from 0.5 to 6.0 g. X-ray powder diffraction (XRPD), micro-Raman, thermogravimetric analysis, X-ray photoeelectron spectroscopy, Boehm titrations, high-resolution transmission electron microscopy, and, finally, positron annihilation lifetime spectroscopy (PALS) are exploited to assess the properties of GO. Results show that increasing oxidant species can tune the interlayer gap between GO sheets up to a maximum value in the case of 4.0 g KMnO4 content. Moreover, these results validate the two-component-based model of GO in which, at low oxidation degree, there are unsplit/isolated graphene planes, instead at higher oxidant amounts, a five-layer sandwiched configuration occurs comprising graphene planes having functional groups decorating the edges (bwGO), hydrated oxidative debris (OD) and "empty" spaces (revealed by PALS as the distance between (bwGO + OD) two-component layers). In addition, by XRPD analysis, the total gap between two sheets is easily computed. In order to correlate these findings to pollutant removal capability, planar o-toluidine adsorption is studied. Since this molecule diffuses in an aqueous environment, the obtained adsorption percentages are compared to the thickness of the hydrated OD grafted onto bwGO. A strict connection between the pollutant removal efficacy and the variation of the hydrated interlayer distance is found
Positronium Confinement in Small Cavities: A Two-Particle Model for the Lowering of Contact Density
Positronium (Ps) is widely used as a probe for studying nanometric porosities in condensed matter. Accessible experimental measurements concern annihilation rates by pickoff processes and contact densities (the electron density at the positron position). Existing models for describing Ps properties in small cavities do not justify the lowering of the contact density with respect to that of Ps in vacuum, as found in most materials. We formulate a two-particle model in which only the electron is confined in the cavity, while the positron is moving freely and feels the medium via a positive work function. Our calculation fully explains experimental data for a large class of materials and suggests a way to gain information on pore sizes and positron work functions
Shelf life of fresh air packaged and precooked vacuum packaged quails
The shelf-life of 3 batches (Q1, Q2, Q3) of quail meat, were examined. Q1 were cut and seasoned with commercial olive oil, stoned green olive and sliced bacon. Q2 were divided into two subgroups: Q2.1 produced in the previously described conditions; Q2.2 seasoned also with rosemary. Quails were placed in lowdensity polystirene barrier trays and aerobically packaged. Q3 quails were boiled in salted hot water for 40 min, seasoned with myrtle leafs, placed in low density polyethylene bags and vacuum packaged. All samples were stored at +2 and +7°C. Analysis were conducted at 0, 3, 7, 9 and 14 days (T0, T3, T7, T9, and T14, respectively). For all the samples, pH measurement and microbial analysis [total viable count (TVC), Enterobacteriaceae, E. coli, Lactobacillus spp. (LAB), Pseudomonas spp., Brochothrix thermosphacta, coagulase-negative Staphylococci (CNS), Enterococcus spp., yeasts and moulds, Salmonella spp., Listeria monocytogenes] were performed. Initial TVC levels of fresh quails (ca. 4 log CFU/g) were rather high and this may be due to the microbial population of the raw material. In Q1 and Q2.1 samples, TVC reached the value of 7 log, which is considered as the upper acceptability limit for fresh poultry meat (after T9 under storage at +2°C and after T7 at +7°C). In Q2.2 samples such limit was reached earlier, after T3. In Q3 samples, lower TVC levels were recorded and did not reach the above mentioned limit, not even at the end of storage. However, mean counts >5 log were reached, maybe because of a post-cooking cross-contamination. Salmonella spp. prevalence was 33% in Q1, Q2.1 and Q2.2 samples
- …