Performance of a Rank Sum Combiner for FFH-MFSK Signaling in Partial Band Interference

We consider the performance of a fast frequency hopping M-ary frequency shift keying spread spectrum rank sum diversity combiner. The spread signals are received in partial band interference and the parameters of this intentional interference are unknown. For the BFSK (M=2) case and a Rayleigh fading channel, the analytical performance of the rank sum receiver is compared to that of the linear receiver. Simulations are carried out for the rank sum receiver in a non-fading channel and compared to simulated performance of the clipper receiver and product combiner receiver (PCR). The performance of the rank sum combiner, in the non-fading channel, is comparable to the product combiner receiver and almost always is worse than the clipper receiver. In the Rayleigh fading channel, the rank sum receiver performs considerably better than the linear receiver when the jamming fraction is relatively small

Lightside Atmospheric Revitalization System

The system was studied as a replacement to the present baseline LiOH system for extended duration shuttle missions. The system consists of three subsystems: a solid amine water desorbed regenerable carbon dioxide removal system, a water vapor electrolysis oxygen generating system, and a Sabatier reactor carbon dioxide reduction system. The system is designed for use on a solar powered shuttle vehicle. The majority of the system's power requirements are utilized on the Sun side of each orbit, when solar power is available

GRIDCC: Real-time workflow system

The Grid is a concept which allows the sharing of resources between distributed communities, allowing each to progress towards potentially different goals. As adoption of the Grid increases so are the activities that people wish to conduct through it. The GRIDCC project is a European Union funded project addressing the issues of integrating instruments into the Grid. This increases the requirement of workflows and Quality of Service upon these workflows as many of these instruments have real-time requirements. In this paper we present the workflow management service within the GRIDCC project which is tasked with optimising the workflows and ensuring that they meet the pre-defined QoS requirements specified upon them

Performance of R-GMA for monitoring grid jobs for CMS data production

High energy physics experiments, such as the Compact Muon Solenoid (CMS) at the CERN laboratory in Geneva, have large-scale data processing requirements, with data accumulating at a rate of 1 Gbyte/s. This load comfortably exceeds any previous processing requirements and we believe it may be most efficiently satisfied through grid computing. Furthermore the production of large quantities of Monte Carlo simulated data provides an ideal test bed for grid technologies and will drive their development. One important challenge when using the grid for data analysis is the ability to monitor transparently the large number of jobs that are being executed simultaneously at multiple remote sites. R-GMA is a monitoring and information management service for distributed resources based on the grid monitoring architecture of the Global Grid Forum. We have previously developed a system allowing us to test its performance under a heavy load while using few real grid resources. We present the latest results on this system running on the LCG 2 grid test bed using the LCG 2.6.0 middleware release. For a sustained load equivalent to 7 generations of 1000 simultaneous jobs, R-GMA was able to transfer all published messages and store them in a database for 98% of the individual jobs. The failures experienced were at the remote sites, rather than at the archiver's MON box as had been expected

Frequentist Analysis of the Parameter Space of Minimal Supergravity

We make a frequentist analysis of the parameter space of minimal supergravity (mSUGRA), in which, as well as the gaugino and scalar soft supersymmetry-breaking parameters being universal, there is a specific relation between the trilinear, bilinear and scalar supersymmetry-breaking parameters, A_0 = B_0 + m_0, and the gravitino mass is fixed by m_{3/2} = m_0. We also consider a more general model, in which the gravitino mass constraint is relaxed (the VCMSSM). We combine in the global likelihood function the experimental constraints from low-energy electroweak precision data, the anomalous magnetic moment of the muon, the lightest Higgs boson mass M_h, B physics and the astrophysical cold dark matter density, assuming that the lightest supersymmetric particle (LSP) is a neutralino. In the VCMSSM, we find a preference for values of m_{1/2} and m_0 similar to those found previously in frequentist analyses of the constrained MSSM (CMSSM) and a model with common non-universal Higgs masses (NUHM1). On the other hand, in mSUGRA we find two preferred regions: one with larger values of both m_{1/2} and m_0 than in the VCMSSM, and one with large m_0 but small m_{1/2}. We compare the probabilities of the frequentist fits in mSUGRA, the VCMSSM, the CMSSM and the NUHM1: the probability that mSUGRA is consistent with the present data is significantly less than in the other models. We also discuss the mSUGRA and VCMSSM predictions for sparticle masses and other observables, identifying potential signatures at the LHC and elsewhere.Comment: 18 pages 27 figure

Non-vacuum Preparation of wse2 Thin Films via the Selenization of Hydrated Tungsten Oxide Prepared using Chemical Solution Methods

It is known that tungsten oxide may be reacted with selenium sources to form WSe2 but literature reports include processing steps that involve high temperatures, reducing atmospheres, and/or oxidative pre-treatments of tungsten oxide. In this work, we report a non-vacuum process for the fabrication of compositionally high quality WSe2 thin films via the selenization of tungsten oxide under milder conditions. Tungsten source materials were various hydrated WO3 and WO2.9 compounds that were prepared using chemical solution techniques. Resulting films were selenized using a two-stage heating profile (250 °C for 15 minutes and 550 °C for 30 minutes) under a static argon atmosphere. Effects of the starting tungsten oxide phase on WSe2 formation after single and double selenization cycles were investigated using Raman spectroscopy and X-ray diffraction (XRD). After two selenization cycles, hydrated WO3 was converted to (002)-oriented WSe2 that exhibits well-resolved peaks for E12g and A1g phonon modes. Only a single selenization cycle was required to convert amorphous WO2.9 to WSe2. All selenizations in this work were achieved in non-reducing atmospheres and at lower temperatures and shorter times than any non-laser-assisted processes reported for WO3-to-WSe2 conversions

Non-vacuum Preparation of wse2 Thin Films via the Selenization of Hydrated Tungsten Oxide Prepared using Chemical Solution Methods

It is known that tungsten oxide may be reacted with selenium sources to form WSe2 but literature reports include processing steps that involve high temperatures, reducing atmospheres, and/or oxidative pre-treatments of tungsten oxide. In this work, we report a non-vacuum process for the fabrication of compositionally high quality WSe2 thin films via the selenization of tungsten oxide under milder conditions. Tungsten source materials were various hydrated WO3 and WO2.9 compounds that were prepared using chemical solution techniques. Resulting films were selenized using a two-stage heating profile (250 oC for 15 minutes and 550 oC for 30 minutes) under a static argon atmosphere. Effects of the starting tungsten oxide phase on WSe2 formation after single and double selenization cycles were investigated using Raman spectroscopy and X-ray diffraction (XRD). After two selenization cycles, hydrated WO3 was converted to (002)-oriented WSe2 that exhibits well-resolved peaks for E12g and A1g phonon modes. Only a single selenization cycle was required to convert amorphous WO2.9 to WSe2. All selenizations in this work were achieved in non-reducing atmospheres and at lower temperatures and shorter times than any non-laser-assisted processes reported for WO3-to-WSe2 conversions

Ultra-compact planoconcave zoned metallic lens based on the fishnet metamaterial

The following article appeared Pacheco-Pena, V., Orazbayev, B., Torres, V., Beruete, M., & Navarro-Cia, M. (n.d). Ultra-compact planoconcave zoned metallic lens based on the fishnet metamaterial. Applied Physics Letters, 103(18), and may be found at http://dx.doi.org/10.1063/1.4827876.A 1.5λ0 -thick planoconcave zoned lens based on the fishnet metamaterial is demonstrated experimentally at millimeter wavelengths. The zoning technique applied allows a volume reduction of 60% compared to a full fishnet metamaterial lens without any deterioration in performance. The structure is designed to exhibit an effective refractive index n = -0.25 at f = 56.7GHz (λ0 = 5.29 mm) with a focal length FL = 47.62 mm = 9λ0. The experimental enhancement achieved is 11.1dB, which is in good agreement with simulation and also with previous full fishnet metamaterial lenses and opens the door for integrated solutions.This work was supported in part by the Spanish Government under contract Consolider Engineering Metamaterials CSD2008-00066 and contract TEC2011- 28664-C02-01. V.P.-P. was sponsored by Spanish Ministerio de Educacion, Cultura y Deporte under Grant No. FPU AP- 2012-3796. B.O. was sponsored by Spanish Ministerio de Economıa y Competitividad under Grant No. FPI BES-2012- 054909. V.T. is sponsored by the Universidad Publica de Navarra. M.B. is sponsored by the Spanish Government via RYC-2011-08221. M.N.-C. was supported by the Imperial College Junior Research Fellowship

Testing of tritium breeder blanket activation foil spectrometer during JET operations

Accurate measurement of the nuclear environment within a test tritium breeding-blanket module of a fusion reactor is crucial to determine tritium production rates which are relevant to self-sufficiency of tritium fuel supply, tritium accountancy and also to the evaluation of localised power levels produced in blankets. This requires evaluation of the time-dependent spectral neutron flux within the test tritium breeding-blanket module under harsh radiation and temperature environments. The application of an activation foil-based spectrometer system to determine neutron flux density using a pneumatic transfer system in ITER has been studied, deployed and tested on the Joint European Torus (JET) machine in a recent deuterium - deuterium campaign for a selection of high purity activation foils. Deployment of the spectrometer system has provided important functional and practical testing of the detector measurement system, associated hardware and post processing techniques for the analysis of large data sets produced through the use of list mode data collection. The testing is invaluable for the optimisation of systems for future planned testing in tritium - tritium and deuterium - tritium conditions. Analysis of the time and energy spectra collected to date and the status of the development of methods for post processing are presented in this paper