Feasibility of Using Saltcedar as a Filler in Injection-Molded Polyethylene Composites

Saltcedar (Tamarix ramosissima) was investigated for use as a filler in wood-plastic composites (WPCs). The mineral content, water-soluble extractive content, and thermal stability of saltcedar flour were compared with those of a commercial pine wood flour. The wood flours were compounded with plastic, and the viscosities of the composite melts containing the two species were compared. Injection-molded composites produced from the compounded material were evaluated for mechanical performance and weatherability. Saltcedar flour had more minerals and water-soluble extractives than pine flour, which resulted in lower thermal stability, but also lower melt viscosity when compounded with high-density polyethylene. Injection-molded WPCs made from unextracted saltcedar performed similarly to those made from pine in accelerated weathering tests, but their mechanical properties were generally lower. The flexural modulus of elasticity increased when extracted wood flour was used, especially for the saltcedar composites. However, color stability and flexural strength changed little. Producing WPCs from these composites is possible, although economically feasible applications that use the advantageous properties of these species and that can tolerate or address the less desirable ones need to be identified and demonstrated

Density Range of Compression-Molded Polypropylene-Wood Composites

Wood and polypropylene fibers were mixed together in various proportions and compression-molded to boards of various specific gravities. The full theoretical specific gravity range could not be obtained even when the boards were cooled in the press. Voids surrounding the wood fibers possibly were due to the shrinkage of the wood fiber following pressing. Bending and tension properties were influenced more by the compression of the wood fibers than by the percentage of wood fiber addition

Waste-Wood-Derived Fillers for Plastics

Filled thermoplastic composites are stiffer, stronger, and more dimensionally stable than their unfilled counterparts. Such thermoplastics are usually provided to the end-user as a precompounded, pelletized feedstock. Typical reinforcing fillers are inorganic materials like talc or fiberglass, but materials derived from waste wood, such as wood flour and recycled paper fiber, are also effective as fillers. The goal of this project was to generate commercial interest in using waste-wood–paper-derived fillers (WPFs) to reinforce thermoplastics. The research strategy was twofold: developmental research and outreach. Specific objectives were (1) to improve wastepaper fiber preparation, feeding, and compounding methods, and optimize composite performance, and (2) to communicate to end-product manufacturers the advantages of WPF thermoplastics. The research was led and supported by the Forest Products Laboratory (FPL), with input from a consortium of 15 fiber suppliers and plastics manufacturers. Additional funding was provided by the Wisconsin Department of Natural Resources. Equipment was leased and installed at FPL. Eight general purpose formulations were developed—they included extrusion and injection molding grades of both polyethylene and polypropylene, reinforced with WPFs. An information packet containing performance data, appropriate processing conditions, sample pellets, sample parts, and a questionnaire was sent to nearly 500 commercial plastics manufacturers in Wisconsin, Illinois, and Michigan. In response to requests for in-house trials, FPL researchers conducted nearly 18 site visits. The researchers ensured proper handling of the material, provided consultation, and gathered information about processing and performance. The trials went very well, and parts were successfully manufactured at all facilities. Products included automobile trim components and housings, vacuum cleaner parts, paint brush handles, bicycle parts, cosmetic cases, and other household items. Great interest has been shown in the use of WPF thermoplastics; one consortium member is establishing a 4 million kg/yr (9 million lb/yr) facility. Total market demand is conservatively expected to exceed 45 million kg/yr (100 million lb/yr)

Comparative Genomic Analysis of Drosophila melanogaster and Vector Mosquito Developmental Genes

Genome sequencing projects have presented the opportunity for analysis of developmental genes in three vector mosquito species: Aedes aegypti, Culex quinquefasciatus, and Anopheles gambiae. A comparative genomic analysis of developmental genes in Drosophila melanogaster and these three important vectors of human disease was performed in this investigation. While the study was comprehensive, special emphasis centered on genes that 1) are components of developmental signaling pathways, 2) regulate fundamental developmental processes, 3) are critical for the development of tissues of vector importance, 4) function in developmental processes known to have diverged within insects, and 5) encode microRNAs (miRNAs) that regulate developmental transcripts in Drosophila. While most fruit fly developmental genes are conserved in the three vector mosquito species, several genes known to be critical for Drosophila development were not identified in one or more mosquito genomes. In other cases, mosquito lineage-specific gene gains with respect to D. melanogaster were noted. Sequence analyses also revealed that numerous repetitive sequences are a common structural feature of Drosophila and mosquito developmental genes. Finally, analysis of predicted miRNA binding sites in fruit fly and mosquito developmental genes suggests that the repertoire of developmental genes targeted by miRNAs is species-specific. The results of this study provide insight into the evolution of developmental genes and processes in dipterans and other arthropods, serve as a resource for those pursuing analysis of mosquito development, and will promote the design and refinement of functional analysis experiments

Advancing Biological Understanding and Therapeutics Discovery with Small-Molecule Probes

Small-molecule probes can illuminate biological processes and aid in the assessment of emerging therapeutic targets by perturbing biological systems in a manner distinct from other experimental approaches. Despite the tremendous promise of chemical tools for investigating biology and disease, small-molecule probes were unavailable for most targets and pathways as recently as a decade ago. In 2005, the U.S. National Institutes of Health launched the decade-long Molecular Libraries Program with the intent of innovating in and broadening access to small-molecule science. This Perspective describes how novel small-molecule probes identified through the program are enabling the exploration of biological pathways and therapeutic hypotheses not otherwise testable. These experiences illustrate how small-molecule probes can help bridge the chasm between biological research and the development of medicines, but also highlight the need to innovate the science of therapeutic discovery.Chemistry and Chemical Biolog

Convalescent plasma in patients admitted to hospital with COVID-19 (RECOVERY): a randomised controlled, open-label, platform trial

Background: Many patients with COVID-19 have been treated with plasma containing anti-SARS-CoV-2 antibodies. We aimed to evaluate the safety and efficacy of convalescent plasma therapy in patients admitted to hospital with COVID-19. Methods: This randomised, controlled, open-label, platform trial (Randomised Evaluation of COVID-19 Therapy [RECOVERY]) is assessing several possible treatments in patients hospitalised with COVID-19 in the UK. The trial is underway at 177 NHS hospitals from across the UK. Eligible and consenting patients were randomly assigned (1:1) to receive either usual care alone (usual care group) or usual care plus high-titre convalescent plasma (convalescent plasma group). The primary outcome was 28-day mortality, analysed on an intention-to-treat basis. The trial is registered with ISRCTN, 50189673, and ClinicalTrials.gov, NCT04381936. Findings: Between May 28, 2020, and Jan 15, 2021, 11558 (71%) of 16287 patients enrolled in RECOVERY were eligible to receive convalescent plasma and were assigned to either the convalescent plasma group or the usual care group. There was no significant difference in 28-day mortality between the two groups: 1399 (24%) of 5795 patients in the convalescent plasma group and 1408 (24%) of 5763 patients in the usual care group died within 28 days (rate ratio 1·00, 95% CI 0·93–1·07; p=0·95). The 28-day mortality rate ratio was similar in all prespecified subgroups of patients, including in those patients without detectable SARS-CoV-2 antibodies at randomisation. Allocation to convalescent plasma had no significant effect on the proportion of patients discharged from hospital within 28 days (3832 [66%] patients in the convalescent plasma group vs 3822 [66%] patients in the usual care group; rate ratio 0·99, 95% CI 0·94–1·03; p=0·57). Among those not on invasive mechanical ventilation at randomisation, there was no significant difference in the proportion of patients meeting the composite endpoint of progression to invasive mechanical ventilation or death (1568 [29%] of 5493 patients in the convalescent plasma group vs 1568 [29%] of 5448 patients in the usual care group; rate ratio 0·99, 95% CI 0·93–1·05; p=0·79). Interpretation: In patients hospitalised with COVID-19, high-titre convalescent plasma did not improve survival or other prespecified clinical outcomes. Funding: UK Research and Innovation (Medical Research Council) and National Institute of Health Research

Moisture Sorption Properties of Composite Boards from Esterified Aspen Fiber

One barrier to producing wood-plastic composites with wood fiber is the poor thermoplasticity of wood fiber. The objective of our study was to determine the plasticization of chemically modified wood fiber through tests on unmodified and esterified fiberboards. Attrition-milled aspen fiber was esterified with neat acetic, maleic, or succinic anhydride. Fourier transform infrared spectroscopy, gas liquid chromatography, and titrational methods were used to confirm derivatization and to characterize the end products of the esterification reaction. All anhydrides formed a simple monoester; succinic anhydride was found to be the most reactive anhydride with a molar gain of 6.0 mol anhydride per kilogram wood fiber. Gains of 4.5 and 2.0 mol anhydride per kilogram wood were found for fiber modified with acetic anhydride and maleic anhydride, respectively. Scanning electron micrographs of hot-pressed fiber mats indicated that esterification of the aspen fibers with maleic or succinic anhydride imparted thermoplasticity to the fibers, whereas acetylation did not affect thermal properties. Fiber modified with succinic anhydride appeared to exhibit the greatest thermoplasticity. Esterified fiber in fiberboards made with phenol-formaldehyde as an adhesive or combined with polypropylene to form polymer-wood fiber composites had reduced moisture sorption and reduced rate of swelling in liquid water. Polypropylene also imparted temporary water repellency to the fibers