Jedan novi postupak estimacije brzine vrtnje vektorski upravljanog asinkronog motora zasnovan na adaptivnom sustavu s referentnim modelom i neuronskim mrežama

This paper proposes a new sensorless technique for induction motor drives based on a hybrid MRAS-neural technique, which improves a previously developed neural MRAS based sensorless method. In this paper the open-loop integration in the reference model is performed by an adaptive neural integrator, enhanced here by means of a speed-varying filter transfer function. The adaptive model is based on a more accurate discrete current model based on the modified Euler integration, with a resulting more stable behaviour in the field weakening region. The adaptive model is further trained on-line by a generalized least squares technique, the MCA EXIN + neuron, in which a parameterized learning algorithm is used. As a consequence, the speed estimation presents an improved convergence with higher accuracy and shorter settling time, because of the better transient behaviour of the neuron. A test bench has been set up to verify the methodology experimentally and the results prove its goodness at very low speeds (below 4 rad/s) and in zero-speed operation.U članku se predlaže novi postupak estimacije brzine vrtnje elektromotornog pogona s vektorski upravljanim asinkronim motorom. Postupak se zasniva na hibridnom adaptivnom sustavu s referentnim modelom (MRAS) i neuronskim mrežama. Takav postupak poboljšava prethodno razvijeni estimacijski postupak također zasnovan na »neuronskom MRAS-u«. U radu je realizirana integracija u otvorenoj petlji u referentnom modelu pomoću adaptivnog neuronskog integratora unaprijeđenog s filtrom čija prijenosna funkcija ovisi o brzini motora. Adaptivni je model zasnovan na točnijem diskretnom strujnom modelu motora dobivenom modificiranom Eulerovom integracijom, što rezultira stabilnijim vladanju pogona u režimu slabljenja polja. Adaptivni je model nadalje on-line obučavan korištenjem poopćene metode najmanjih kvadrata (»MCA EXIN+neuron« postupak) pri čemu se koristi parametrirani algoritam učenja. Zbog boljeg ponašanja neurona u dinamičkim stanjima poboljšava se konvergencija estimacije brzine s većom točnošću i manjim vremenom smirivanja. Za eksperimentalnu provjeru predložene metode izgrađena je laboratorijska maketa. Dobiveni rezultati potvrđuju valjanost metode na veoma niskim brzinama (ispod 4 rad/s) i u režimu nulte brzine

Deep Learning algorithms for automatic COVID-19 detection on chest X-ray images

Coronavirus disease (COVID-19) was confirmed as a pandemic disease on February 11, 2020. The pandemic has already caused thousands of victims and infected several million people around the world. The aim of this work is to provide a Covid-19 infection screening tool. Currently, the most widely used clinical tool for detecting the presence of infection is the reverse transcription polymerase chain reaction (RT-PCR), which is expensive, less sensitive and requires the resource of specialized medical personnel. The use of X-ray images represents one of the latest challenges for the rapid diagnosis of the Covid-19 infection. This work involves the use of advanced artificial intelligence techniques for diagnosis using algorithms for classification purposes. The goal is to provide an automatic infection detection method while maximizing detection accuracy. A public database was used which includes images of COVID-19 patients, patients with viral pneumonia, patients with pulmonary opacity, and healthy patients. The methodology used in this study is based on transfer learning of pre-trained networks to alleviate the complexity of calculation. In particular, three different types of convolutional neural networks, namely, InceptionV3, ResNet50 and Xception, and the Vision Transformer are implemented. Experimental results show that the Vision Transformer outperforms convolutional architectures with a test accuracy of 99.3% vs 85.58% for ResNet50 (best among CNNs). Moreover, it is able to correctly distinguish among four different classes of chest X-ray images, whereas similar works only stop at three categories at most. The high accuracy of this computer-assisted diagnostic tool can significantly improve the speed and accuracy of COVID-19 diagnosis

Vehicle to grid system to design a centre node virtual unified power flow controller

Centre node unified power flow controller can fulfil various power flow control objectives, such as the needs of reactive shunt and series compensation, phase shifting and ensure higher degree of control freedom. However, as they are expensive, they are not widely used. The potential of a low-cost solution that utilises the capabilities of plug in electric vehicle (PEV) in vehicle-to-grid mode of operation for the design of a centre node virtual unified power flow controller (CVUPFC) using PEV charging stations is explained. Simulations are performed to establish that the proposed CVUPFC improves the power quality utilising PEV charging stations as DC bus for the converters with higher degree of freedom to control

The h-EXIN CCA for Bearing Fault Diagnosis

This paper presents the hierarchical EXIN CCA, which represents a novel and reliable approach to complex pattern recognition problems. The methodology is based on the EXIN CCA, which is an extension of the Curvilinear Component Analysis, for data reduction, and neural networks for data classification. The effectiveness of this condition monitoring scheme is verified in a demanding bearing fault diagnostic scenario

Hybrid Propulsion Efficiency Increment through Exhaust Energy Recovery—Part 2: Numerical Simulation Results

The efficiency of hybrid electric vehicles may be substantially increased if the energy of exhaust gases, which do not complete the expansion inside the cylinder of the internal combustion engine, is efficiently recovered using a properly designed turbo-generator and employed for vehicle propulsion. Previous studies, carried out by the same authors of this work, showed a potential hybrid vehicle fuel efficiency increment up to 15% employing a 20 kW turbine on a 100 HP-rated power thermal unit. The innovative thermal unit proposed here is composed of a supercharged engine endowed with a properly designed turbo-generator, which comprises two fundamental elements: an exhaust gas turbine expressly designed and optimized for the application, and a suitable electric generator necessary to convert the recovered energy into electric energy, which can be stored in the on-board energy storage system of the vehicle. In this two-part work, the realistic efficiency of the innovative thermal unit for hybrid vehicles is evaluated and compared to a traditional turbocharged engine. In Part 1, the authors presented a model for the prediction of the efficiency of a dedicated radial turbine, based on a simple but effective mean-line approach; the same paper also reports a design algorithm, which, thanks to some assumptions and approximations, allows fast determination of the right turbine geometry for a given design operating condition. It is worth pointing out that, being optimized for quasi-steady power production, the exhaust gas turbine here considered is quite different from the ones commonly employed for turbocharging applications; for this reason, and in consideration of the required power size, such a turbine is not available on the market, nor has its development been previously carried out in the scientific literature. In this paper, Part 2, a radial turbine geometry is defined for the thermal unit previously calculated, employing the design algorithm described in Part 1; the realistic energetic advantages that could be achieved by the implementation of the turbo-generator on a hybrid propulsion system are evaluated through the performance prediction model under different operating conditions of the thermal unit. As an overall result, it was estimated that, compared to a reference traditional turbocharged engine, the turbo-compound system could gain vehicle efficiency improvement between 3.1% and 17.9%, according to the output power delivered, with an average efficiency increment of 10.9% evaluated on the whole operating range

Hybrid Propulsion Efficiency Increment through Exhaust Energy Recovery—Part 1: Radial Turbine Modelling and Design

The efficiency of Hybrid Electric Vehicles (HEVs) may be substantially increased if the energy of the exhaust gases, which do not complete the expansion inside the cylinder of the internal combustion engine, is efficiently recovered by means of a properly designed turbogenerator and employed for vehicle propulsion; previous studies, carried out by the same authors of this work, showed a potential hybrid vehicle fuel efficiency increment up to 15% by employing a 20 kW turbine on a 100 HP rated power thermal unit. The innovative thermal unit here proposed is composed of a supercharged engine endowed with a properly designed turbogenerator, which comprises two fundamental elements: an exhaust gas turbine expressly designed and optimized for the application, and a suitable electric generator necessary to convert the recovered energy into electric energy, which can be stored in the on-board energy storage system of the vehicle. In these two parts, the realistic efficiency of the innovative thermal unit for hybrid vehicle is evaluated and compared to a traditional turbocharged engine. In Part 1, the authors present a model for the prediction of the efficiency of a dedicated radial turbine, based on a simple but effective mean-line approach; the same paper also reports a design algorithm, which, owing to some assumptions and approximations, allows a fast determination of the proper turbine geometry for a given design operating condition. It is worth pointing out that, being optimized for quasi-steady power production, the exhaust gas turbine considered is quite different from the ones commonly employed for turbocharging application; for this reason, and in consideration of the required power size, such a turbine is not available on the market, nor has its development been previously carried out in the scientific literature. In the Part 2 paper, a radial turbine geometry is defined for the thermal unit previously calculated, employing the design algorithm described in Part 1; the realistic energetic advantage that could be achieved by the implementation of the turbogenerator on a hybrid propulsion system is evaluated through the performance prediction model under the different operating conditions of the thermal unit. As an overall result, it was estimated that, compared to a reference traditional turbocharged engine, the turbocompound system could gain vehicle efficiency improvement between 3.1% and 17.9%, depending on the output power level, while an average efficiency increment of 10.9% was determined for the whole operating range

Sensorless Control of Induction Motors by the MSA based MUSIC Technique

This paper proposes a speed sensorless technique for induction motor drives based on the retrieval and tracking of the rotor slot harmonics (RSH). The RSH related to the rotor speed is first extracted from the stator phase current signature by the adoption of two cascaded ADALINEs (ADAptive Linear Element), whose output is the estimated slot harmonic. Then, the frequency of this slot harmonic as well as the speed is estimated by using minor space analysis (MSA) EXIN neural networks, which work on-line to iteratively compute the frequency of the slot harmonics based on MUSIC spectrum estimation theory. Thanks to its sample-based learning and the reduced mean square frequency estimation error, the speed estimation is fast and accurate. The proposed sensorless technique has been experimentally tested on a suitably developed test set-up with a 2-kW induction motor drive. It has been verified that this algorithm can track the rotor speed rapidly and accurately in a very wide speed range, working from rated speed down to 1.3 % of it

Optimized fractional low and highpass filters of (1 + α) order on FPAA

This work proposes an optimum design and implementation of fractional-order Butterworth filter of order (1 + α), with the help of analog reconfigurable field-programmable analog array (FPAA). The designed filter coefficients are obtained after dual constraint optimization to balance the tradeoffs between magnitude error and stability margin together. The resulting filter ensures better robustness with less sensitivity to parameter variation and minimum least square error (LSE) in magnitude responses, passband and stopband errors as well as a better –3dB normalized frequency approximation at 1 rad/s and a stability margin. Finally, experimental results have shown both lowpass and highpass fractional step values. The FPAA-configured outputs represent the possibility to implement the real-time fractional filter behavior with close approximation to the theoretical design

Wind gust estimation for precise quasi - hovering control of quadrotor aircraft

This paper focuses on the control of quadrotor vehicles without wind sensors that are required to accurately track low-speed trajectories in the presence of moderate yet unknown wind gusts. By modeling the wind disturbance as exogenous inputs, and assuming that compensation of its effects can be achieved through quasistatic vehicle motions, this paper proposes an innovative estimation and control scheme comprising a linear dynamic filter for the estimation of such unknown inputs and requiring only position and attitude information. The filter is built upon results from Unknown Input Observer theory and allows estimation of wind and vehicle state without measurement of the wind itself. A simple feedback control law can be used to compensate for the offset position error induced by the disturbance. The proposed filter is independent of the recovery control scheme used to nullify the tracking error, as long as the corresponding applied rotor speeds are available. The solution is first checked in simulation environment by using the Robot Operating System middleware and the Gazebo simulator and then experimentally validated with a quadcopter system flying with real wind sources