A fiber Bragg grating direct current sensor with temperature compensation based on electromagnetic force

A novel fiber Bragg grating direct current sensor with intrinsic temperature compensation is presented in this article. The operating principle of the sensor is based on the deflection of a cantilever beam due to the electromagnetic force between a static-iron and a moving-iron attached to the free end of the cantilever which is enclosed within a solenoid through which the current under test is passed. The deflection of the cantilever beam is measured by differential strain sensing using two fiber Bragg gratings mounted on either side of the beam, thus achieving temperature compensation. The sensor operation is theoretically described, and experimental measurements confirm the operation of the fiber Bragg grating direct current sensor up to 500 A. A 382-pm Bragg wavelength shift difference is detected when the current is 500 A. The test results are analyzed and discussed in the time domain and frequency domain. The resistance to electromagnetic interference immunity of the fiber Bragg grating sensor is improved compared with the strain gauge sensor

Long Short-Term Memory Neural Network with Transfer Learning and Ensemble Learning for Remaining Useful Life Prediction

Prediction of remaining useful life (RUL) is greatly significant for improving the safety and reliability of manufacturing equipment. However, in real industry, it is difficult for RUL prediction models trained on a small sample of faults to obtain satisfactory accuracy. To overcome this drawback, this paper presents a long short-term memory (LSTM) neural network with transfer learning and ensemble learning and combines it with an unsupervised health indicator (HI) construction method for remaining-useful-life prediction. This study consists of the following parts: (1) utilizing the characteristics of deep belief networks and self-organizing map networks to translate raw sensor data to a synthetic HI that can effectively reflect system health; and (2) introducing transfer learning and ensemble learning to provide the required degradation mechanism for the RUL prediction model based on LSTM to improve the performance of the model. The performance of the proposed method is verified by two bearing datasets collected from experimental data, and the results show that the proposed method obtains better performance than comparable methods

Iteration Bayesian Reweighed Algorithm for Optical Carrier-Based Microwave Interferometry Sensing

This paper proposes a novel iteration Bayesian reweighed (IBR) algorithm to obtain accurate estimates of a measurement parameter that uses only a few noisy measurement data. The method is applied to optimize the frequency fluctuation in an optical carrier-based microwave interferometry (OCMI) system. The algorithm iteratively estimates the frequency of the S-parameter valley point by collecting training samples to rebalance the weights between prior samples, which reduces the impact of noise in the system. Simulation shows that the estimated result of this algorithm is closer to the true value than that of the maximum likelihood estimation (MLE) using the same amount of measured data. Under the influence of system noise, this algorithm optimizes the frequency fluctuation of the S-parameter and reduces the impact of individual measured data. In this study, we applied the algorithm in the strain sensing experiment and compared it with the MLE. When axial strain changes 240 με, the IBR algorithm yields a deviation of 36 με, which is a significant reduction from 138 με (using the MLE method). Moreover, the average error rate decreases from 25% to 3% (with the MLE method), suggesting that the linear fitting degree of the estimated results and accuracy of the system are improved. Moreover, the algorithm has a wide range of applicability, for it can handle different application models in the OCMI system and the systems with frequency fluctuation problems

Pretreatment of Ultra-Weak Fiber Bragg Grating Hydrophone Array Based on Cubic Spline Interpolation Using Intensity Compensation

The demodulation algorithm based on 3 × 3 coupler in a fiber-optic hydrophone array has gained extensive attention in recent years. The traditional method uses a circulator to construct the normal path-match interferometry; however, the problem of increasing the asymmetry of the three-way signal to be demodulated is easily overlooked. To provide a solution, we report a pretreatment method for hydrophone array based on 3 × 3 coupler demodulation. We use cubic spline interpolation to perform nonlinear fitting to the reflected pulse train and calculate the peak-to-peak values of the single pulse to determine the light intensity compensation coefficient of the interference signal, so as to demodulate the corrected three-way interference signal. For experimental verification, ultra-weak fiber Bragg gratings (uwFBGs) with reflectivity of −50 dB are applied to construct a hydrophone array with 800 sensors, and a vibratory liquid column method is set up to generate a low-frequency hydroacoustic signal. Compared to the traditional demodulation algorithm based on a 3 × 3 coupler, the pretreatment method can improve the consistency of interference signals. The Lissajous figures show that cubic spline interpolation can improve the accuracy of monopulse peak seeking results by about 1 dB, and intensity compensation can further lead to a much lower noise density level for the interference pulse amplitude—specifically, more than 7 dB at 5~50 Hz—and the signal-to-noise ratio is improved by approximately 10 dB at 10 Hz. The distinct advantages of the proposed pretreatment method make it an excellent candidate for a hydrophone array system based on path-match interferometry