The simultaneous removal of cadmium (II) and lead (II) from wastewater with the application of green synthesized magnesium silicate hydrate

To the purpose of solving the problems of coal-gangue accumulation in the mine and pollution of cadmium (II) and lead (II) in wastewater, magnesium silicate hydrate (M-S-H) was synthesized from coal-gangue by thermochemical. M-S-H had removed Cd(II) and Pb(II) by adsorption. The characterization of M-S-H and adsorption effects factors, including initial solution pH, initial metal concentration, adsorbent dose, temperature, reaction time, and coexisting ions were explored for adsorption performance. The solution pH was precisely controlled by a pH meter. The adsorption temperature was controlled by a thermostatic gas bath oscillator with an error of ±0.3. These results from this study revealed that M-S-H surface area increased from 8.12 to 26.15 m2/g with a pore volume of 0.12 cm3/g. The maximum adsorptions of Cd(II) and Pb(II) by M-S-H were 59.52 and 83.33 mg g−1, respectively. The adsorption performance for Cd(II) and Pb(II) reached saturation at pH 5, temperature 25°C, M-S-H 6 g/L, reaction time 90 min, and metal concentration 300 mg/L. Cd(II) and Pb(II) adsorption were spontaneous and endothermic and well fitted with the pseudo-second-order kinetic and Langmuir isotherm adsorption models. The adsorption mechanisms were electrostatic interaction, ion exchange, and surface complexation. This research indicated that the synthesized M-S-H from coal gangue was efficiently eliminated metal ions from water, opening up new possibilities for coal gangue reuse

Alternate erosion and deposition in the Yangtze Estuary and its future change

The morphological changing trend of the Yangtze Estuary, the largest estuary of Asia, has become a focus of research in recent years. Based on a long series of topographic data from 1950 to 2015, this paper studied the erosion-deposition pattern of the entire Yangtze Estuary. An alternation between erosion and deposition was found during the past 65 years, which was in correspondence to the alternation between flood and dry periods identified by multi-year average duration days of high-level water flow (defined as discharge ≥ 60,000 m3/s, namely, D≥60,000) from the Yangtze River Basin. A quantitative relationship was further developed between the erosional/depositional rate of the Yangtze Estuary and the interpreting variables of yearly water discharge, D≥60,000 and yearly river sediment load, with contributing rates of 1%, 59% and 40%, respectively. Mechanism behind the alternate erosion and deposition pattern was analyzed by examining residual water surface slope and the corresponding capacity of sediment transport in flood and dry periods. In flood periods, a larger discharge results in steeper slope of residual water level which permits a greater capacity of sediment transport. Therefore, more bed materials can be washed to the sea, leading to erosion of the estuary. In contrast, flatter slope of residual water level occurs in dry periods, and deposition dominates the estuarine area due to the decreased capacity of sediment transport and the increased backwater effect of flood-tide. Coastal dynamics and estuarine engineering projects alter the local morphological changes, but slightly affect the total erosional/depositional rate of the whole estuarine region. Heavy sedimentation within the Yangtze Estuary after the impoundment of the Three Gorges Dam can be attributed to the reduced occurrence frequency of flood years due to water regulation by the dam, and largely (at least 36%–52%) sourced from the sea. Deposition is still possible to occur in the Yangtze Estuary in the future, because the multi-year average D≥60,000 is unlikely to exceed the critical value of 14 days/yr which corresponds to the future equilibrium state of the Yangtze Estuary, under the water regulation of the large cascade dams in the upper Yangtze. Nevertheless, the mean depositional rate will not surpass the peak value of the past years, since the total sediment load entering the Yangtze Estuary has presented a decreasing trend

Rapid detection of influenza A viruses using a real-time reverse transcription recombinase-aided amplification assay

IntroductionInfluenza A viruses (IAVs) are important pathogens of respiratory infections, causing not only seasonal influenza but also influenza pandemics and posing a global threat to public health. IAVs infection spreads rapidly, widely, and across species, causing huge losses, especially zoonotic IAVs infections that are more harmful. Fast and sensitive detection of IAVs is critical for controlling the spread of this disease.MethodsHere, a real-time reverse transcription recombinase-aided amplification (real-time RT-RAA) assay targeting conserved positions in the matrix protein gene (M gene) of IAVs, is successfully established to detect IAVs. The assay can be completed within 20 min at 42°C.ResultsThe sensitivity of the real-time RT-RAA assay was 142 copies per reaction at 95% probability, which was comparable to the sensitivity of the RT-qPCR assay. The specificity assay showed that the real-time RT-RAA assay was specific to IAVs, and there was no cross-reactivity with other important viruses. In addition, 100%concordance between the real-time RT-RAA and RT-qPCR assays was achieved after testing 120 clinical specimens.DiscussionThe results suggested that the real-time RT-RAA assay we developed was a specific, sensitive and reliable diagnostic tool for the rapid detection of IAVs

Study on Hydraulic Characteristic of Submerged Jet with Depression Angle Dived into Plunge Pool from the Underwater Surface

Experiment research on submerged jet with depression angle dived into plunge pool from near-surface was carried out. The results showed that this type of energy dissipation type has good effect in improving the energy dissipation rate, reducing the surface fluctuation and reducing near-bed velocity and so on. Calculation formulas of conjugate depth and energy dissipation were obtained through theory analysis of submerged hydraulic jump in water cushion. Formula analysis showed that for high Froude number flow at a certain downstream depth, to obtain stable submerge hydraulic jump through adjusting size of jet exit, by decreasing its width is better way than by increasing height. When flow Froude number is larger sudden expansion ratio is more sensitive to energy dissipation, therefor to improving effect of energy dissipation by decreasing jet exit’s width or increasing plunge pool’s width can be used

Study on Hydraulic Characteristic of Submerged Jet with Depression Angle Dived into Plunge Pool from the Underwater Surface

Experiment research on submerged jet with depression angle dived into plunge pool from near-surface was carried out. The results showed that this type of energy dissipation type has good effect in improving the energy dissipation rate, reducing the surface fluctuation and reducing near-bed velocity and so on. Calculation formulas of conjugate depth and energy dissipation were obtained through theory analysis of submerged hydraulic jump in water cushion. Formula analysis showed that for high Froude number flow at a certain downstream depth, to obtain stable submerge hydraulic jump through adjusting size of jet exit, by decreasing its width is better way than by increasing height. When flow Froude number is larger sudden expansion ratio is more sensitive to energy dissipation, therefor to improving effect of energy dissipation by decreasing jet exit’s width or increasing plunge pool’s width can be used

Mineralogical and morphological factors affecting the separation of copper and arsenic in flash copper smelting slag flotation beneficiation process

Separating copper and arsenic has always been a major problem in the copper slag flotation process, which influences copper slag utilization and the environmental safety. A comparative study of flash smelling furnace (FSF) slag and its flotation products (concentrate and tailing) reveals the factors affecting the separation of copper and arsenic in the beneficiation process from the perspective of mineralogy and morphology. The elemental fractionation in the process shows a positive correlation of As, Cu and Cd and an obvious correlation between speciation transformation of copper and arsenic was observed. The occurrence of arsenic and copper in FSF slag correlate the key phases of arsenic copper alloys, accounted for 88.91 % of total arsenic-bearing phases and 32.28% of copper-bearing phases. Closely-embeded matte and copper-arsenic alloys incerease the difficulty of the separation suggesting the finer grinding is needed for slag. Arsenic is liberated and oxidized into arsenate compounds while the recombination of As-O and Cu-S happened in the process affecting the selectivity of copper and arsenic. Arsenic fixed in silicate minerals is discharged into tailing which suggested to induce and fix arsenic into silicate minerals can facilitate arsenic removal from concentrate. FSF slag and its flotation concnetrate show risks of some of some of HMs which should be cautiously transported, disposed, and utilized

Synthesis of Calcium Silicate Hydrate from Coal Gangue for Cr(VI) and Cu(II) Removal from Aqueous Solution

Both the accumulation of coal gangue and potentially toxic elements in aqueous solution have caused biological damage to the surrounding ecosystem of the Huainan coal mining field. In this study, coal gangue was used to synthesize calcium silicate hydrate (C-S-H) to remove Cr(VI) and Cu(II)from aqueous solutions and aqueous solution. The optimum parameters for C-S-H synthesis were 700 & DEG;C for 1 h and a Ca/Si molar ratio of 1.0. Quantitative sorption analysis was done at variable temperature, C-S-H dosages, solution pH, initial concentrations of metals, and reaction time. The solution pH was precisely controlled by a pH meter. The adsorption temperature was controlled by a thermostatic gas bath oscillator. The error of solution temperature was controlled at & PLUSMN; 0.3, compared with the adsorption temperature. For Cr(VI) and Cu(II), the optimum initial concentration, temperature, and reaction time were 200 mg/L, 40 & DEG;C and 90 min, pH 2 and 0.1 g C-S-H for Cr(VI), pH 6 and 0.07 g C-S-H for Cu(II), respectively. The maximum adsorption capacities of Cr(VI) and Cu(II) were 68.03 and 70.42 mg & BULL;g(-1), respectively. Furthermore, the concentrations of Cu(II) and Cr(VI) in aqueous solution could meet the surface water quality standards in China. The adsorption mechanism of Cu(II) and Cr(VI) onto C-S-H were reduction, electrostatic interaction, chelation interaction, and surface complexation. It was found that C-S-H is an environmentally friendly adsorbent for effective removal of metals from aqueous solution through different mechanisms.</p

Biomechanical comparison of different stabilization constructs for unstable posterior wall fractures of acetabulum. A cadaveric study.

PURPOSE: Operative treatment of unstable posterior wall fractures of acetabulum has been widely recommended. This laboratory study was undertaken to evaluate static fixation strength of three common fixation constructs: interfragmentary screws alone, in combination with conventional reconstruction plate, or locking reconstruction plate. METHODS: Six formalin-preserved cadaveric pelvises were used for this investigation. A posterior wall fracture was created along an arc of 40-90 degree about the acetabular rim. Three groups of different fixation constructs (two interfragmentary screws alone; two interfragmentary screws and a conventional reconstruction plate; two interfragmentary screws and a locking reconstruction) were compared. Pelvises were axial loaded with six cycles of 1500 N. Dislocation of superior and inferior fracture site was analysed with a multidirectional ultrasonic measuring system. RESULTS: No statistically significant difference was found at each of the superior and inferior fracture sites between the three types of fixation. In each group, the vector dislocation at superior fracture site was significantly larger than inferior one. CONCLUSIONS: All those three described fixation constructs can provide sufficient stability for posterior acetabular fractures and allow early mobilization under experimental conditions. Higher posterior acetabular fracture line, transecting the weight-bearing surface, may indicate a substantial increase in instability, and need more stable pattern of fixation

Distribution of environmentally sensitive elements in residential soils near a coal-fired power plant: Potential risks to ecology and children's health

One hundred and twelve soil samples were collected from residential areas surrounding a coal-fired power plant at Huainan City, Anhui Province, China. The concentrations of environmentally sensitive elements (ESEs As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn) in soil samples were determined, and their potential ecological and health risks were assessed. Mean concentrations of ESEs in the downwind soils of the power plant are relatively higher than those in the upwind soils, pointing to a potential ESEs input from coal combustion. The calculated ecological risk of ESEs in soils indicates a relatively low ecological risk. Hazard quotient (HQ) of ESEs in downwind soils is 1.5, suggesting a potential health risk for children. However, the carcinogenic risk values of ESEs in soils are within the acceptable non-hazardous range of 1E-06-1E-04. (C) 2013 Elsevier Ltd. All rights reserved