Statics and dynamics of phase segregation in multicomponent fermion gas

We investigate the statics and dynamics of spatial phase segregation process of a mixture of fermion atoms in a harmonic trap using the density functional theory. The kinetic energy of the fermion gas is written in terms of the density and its gradients. Several cases have been studied by neglecting the gradient terms (the Thomas-Fermi limit) which are then compared with the Monte-Carlo results using the full gradient corrected kinetic energy. A linear instability analysis has been performed using the random-phase approximation. Near the onset of instability, the fastest unstable mode for spinodal decomposition is found to occur at $q=0$. However, in the strong coupling limit, many more modes with $q\approx K_F$ decay with comparable time scales.Comment: 14 figure

Quantifying the effect of end support restraints on vibration serviceability of mass timber floor systems: Testing

Design of mass timber floor systems is commonly governed by vibration serviceability due to high stiffness-to-weight ratio and low inherent damping of timber. Research and design practice have shown that static deflection under a concentrated load and fundamental natural frequency can be effective and robust indicators for vibration performance of mass timber floors. These design parameters are normally calculated by assuming simply supported conditions in existing design methods. However, such an assumption deviates from actual floor supports, especially in platform-framed buildings, and in-situ end support restraints have been widely recognized as a significant factor affecting the vibration performance. The purpose of the study is to quantify the influence of end support restraints on vibration serviceability of mass timber floors in platform construction through a comprehensive experimental program and analytical treatment. This paper is the first part and focus specifically on the experimental work on cross-laminated timber (CLT) panels. In particular, extensive laboratory tests have been conducted on different CLT floor panels with various end support restraints induced by top loads, self-tapping screws and steel angle brackets. The fundamental natural frequency and mid-span deflection under a concentrated load were measured for each end support configuration. The rotational restraint stiffness was determined by comparing results of restrained supports to those of simple supports and represented as end fixity factors. The analysis of test results shows that the CLT floor-to-wall connection exhibited inherent non-linear behaviour and such characteristic was more significant for higher top loads. Compared with screws and brackets, the top loads dominated the partially restrained effect but such dominance gradually diminished for lower-level top loads. In addition, support wall thickness notably impacts the support restraint. It was then suggested that the clear span could be used to determine deflection and frequency in the design, but further investigation is needed

Wigner crystallization and metal-insulator transition of two-dimensional holes in GaAs/AlGaAs at B=0

We report the transport properties of a low disorder two-dimensional hole system (2DHS) in the GaAs/AlGaAs heterostructure, which has an unprecedentedly high peak mobility of $7\times 10^5cm^2/Vs$, with hole density of $4.8\times 10^9 cm^{-2}<p<3.72\times 10^{10}cm^{-2}$ in the temperature range of $50mK<T<1.3K$. From their T, p, and electric field dependences, we find that the metal-insulator transition in zero magnetic field in this exceptionally clean 2DHS occurs at $r_s=35.1\pm0.9$, which is in good agreement with the critical $r_s$ for Wigner crystallization ${r_s}^c=37\pm 5$, predicted by Tanatar and Ceperley for an ideally clean 2D system.Comment: 4 pages, 4 Postscript figure

Co-ordination between Rashba spin-orbital interaction and space charge effect and enhanced spin injection into semiconductors

We consider the effect of the Rashba spin-orbital interaction and space charge in a ferromagnet-insulator/semiconductor/insulator-ferromagnet junction where the spin current is severely affected by the doping, band structure and charge screening in the semiconductor. In diffusion region, if the the resistance of the tunneling barriers is comparable to the semiconductor resistance, the magnetoresistance of this junction can be greatly enhanced under appropriate doping by the co-ordination between the Rashba effect and screened Coulomb interaction in the nonequilibrium transport processes within Hartree approximation.Comment: 4 pages, 3 figure

Wavelength-tunable nearly-transform-limited pulse generation based on fiber optical parametric oscillator

Paper P1.02We demonstrate an all-fiber widely-tunable sub-picosecond fiber optical parametric oscillator based on highly-nonlinear dispersion-shifted fiber. Nearly-transform-limited sub-picosecond pulses are generated over a 60-nm tuning range around 1550 nm. © VDE VERLAG GMBH.published_or_final_versio

Widely tunable picosecond optical parametric oscillator using highly nonlinear fiber

We demonstrated a fully fiber-integrated widely tunable picosecond optical parametric oscillator based on highly nonlinear fiber. The ring cavity with a 50 m highly nonlinear fiber was synchronously pumped with a picosecond mode-locked fiber laser. The tuning range was from 1413 to 1543 nm and from 1573 to 1695 nm, which was as wide as 250 nm. A high-quality pulse was generated with a pulse width narrower than that of the pump. © 2009 Optical Society of America.published_or_final_versio

Picosecond fiber optical parametric oscillator with 500 nm tuning range using dispersion-shifted fiber

We demonstrate a picosecond fiber optical parametric oscillator with a tuning range of 500 nm pumped by a relatively low-cost intensity-modulated pump. Pulses with pulsewidth from 7 ps to 17 ps are generated. © 2010 Optical Society of America.published_or_final_versionThe 2010 Conference on Optical Fiber Communication (OFC), collocated National Fiber Optic Engineers Conference (OFC/NFOEC), San Diego, CA., 21-25 March 2010. In Proceedings of OFC/NFOEC, 2010, p. 1-

A simple 10-GHz picosecond pulse source based on fiber optical parametric oscillator

We demonstrate a simple fully fiber-integrated picosecond optical parametric oscillator based on high-nonlinear dispersion-shifted fiber. High quality picosecond pulses are generated with a 40-nm tuning range. © 2009 IEEE.published_or_final_versio