Toward the Integrated Marine Debris Observing System

Plastics and other artificial materials pose new risks to the health of the ocean. Anthropogenic debris travels across large distances and is ubiquitous in the water and on shorelines, yet, observations of its sources, composition, pathways, and distributions in the ocean are very sparse and inaccurate. Total amounts of plastics and other man-made debris in the ocean and on the shore, temporal trends in these amounts under exponentially increasing production, as well as degradation processes, vertical fluxes, and time scales are largely unknown. Present ocean circulation models are not able to accurately simulate drift of debris because of its complex hydrodynamics. In this paper we discuss the structure of the future integrated marine debris observing system (IMDOS)thatisrequiredtoprovidelong-termmonitoringofthestateofthisanthropogenic pollution and support operational activities to mitigate impacts on the ecosystem and on the safety of maritime activity. The proposed observing system integrates remote sensing and in situ observations. Also, models are used to optimize the design of the system and, in turn, they will be gradually improved using the products of the system. Remote sensing technologies will provide spatially coherent coverage and consistent surveying time series at local to global scale. Optical sensors, including high-resolution imaging, multi- and hyperspectral, fluorescence, and Raman technologies, as well as SAR will be used to measure different types of debris. They will be implemented in a variety of platforms, from hand-held tools to ship-, buoy-, aircraft-, and satellite-based sensors. A network of in situ observations, including reports from volunteers, citizen scientists and ships of opportunity, will be developed to provide data for calibration/validation of remote sensors and to monitor the spread of plastic pollution and other marine debris. IMDOS will interact with other observing systems monitoring physical, chemical, and biological processes in the ocean and on shorelines as well as the state of the ecosystem, maritime activities and safety, drift of sea ice, etc. The synthesized data will support innovative multi-disciplinary research and serve a diverse community of users

Toward the integrated marine debris observing system

Plastics and other artificial materials pose new risks to the health of the ocean. Anthropogenic debris travels across large distances and is ubiquitous in the water and on shorelines, yet, observations of its sources, composition, pathways, and distributions in the ocean are very sparse and inaccurate. Total amounts of plastics and other man-made debris in the ocean and on the shore, temporal trends in these amounts under exponentially increasing production, as well as degradation processes, vertical fluxes, and time scales are largely unknown. Present ocean circulation models are not able to accurately simulate drift of debris because of its complex hydrodynamics. In this paper we discuss the structure of the future integrated marine debris observing system (IMDOS) that is required to provide long-term monitoring of the state of this anthropogenic pollution and support operational activities to mitigate impacts on the ecosystem and on the safety of maritime activity. The proposed observing system integrates remote sensing and in situ observations. Also, models are used to optimize the design of the system and, in turn, they will be gradually improved using the products of the system. Remote sensing technologies will provide spatially coherent coverage and consistent surveying time series at local to global scale. Optical sensors, including high-resolution imaging, multi- and hyperspectral, fluorescence, and Raman technologies, as well as SAR will be used to measure different types of debris. They will be implemented in a variety of platforms, from hand-held tools to ship-, buoy-, aircraft-, and satellite-based sensors. A network of in situ observations, including reports from volunteers, citizen scientists and ships of opportunity, will be developed to provide data for calibration/validation of remote sensors and to monitor the spread of plastic pollution and other marine debris. IMDOS will interact with other observing systems monitoring physical, chemical, and biological processes in the ocean and on shorelines as well as the state of the ecosystem, maritime activities and safety, drift of sea ice, etc. The synthesized data will support innovative multi-disciplinary research and serve a diverse community of users

Barotropic wind-driven circulation patterns in a closed rectangular basin of variable depth influenced by a peninsula or an island

We study how a coastal obstruction (peninsula or coastal island) affects the three-dimensional barotropic currents in an oblong rectangular basin with variable bathymetry across the basin width. The transverse depth profile is asymmetric and the peninsula or island lies in the middle of the long side of the rectangle. A semi-spectral model for the Boussinesq-approximated shallow water equations, developed in Haidvogel et al. and altered for semi-implicit numerical integration in time in Wang and Hutter, is used to find the steady barotropic state circulation pattern to external winds. The structural (qualitative) rearrangements and quanti2tative features of the current pattern are studied under four principal wind directions and different lengths of the peninsula and its inclination relative to the shore. The essentially non-linear relationships of the water flux between the two sub-basins (formed by the obstructing peninsula) and the corresponding cross-sectional area left open are found and analysed. It is further analysed whether the depth-integrated model, usually adopted by others, is meaningful when applied to the water exchange problems. The flow through the channel narrowing is quantitatively estimated and compared with the three-dimensional results. The dynamics of the vortex structure and the identification of the up-welling/down-welling zones around the obstruction are discussed in detail. The influence of the transformation of the peninsula into a coastal island on the global basin circulation is considered as are the currents in the channel. The geometric and physical reasons for the anisotropy of the current structure which prevail through all obtained solutions are also discussed.Key words: Oceanography: general (limnology; numerical modeling) - Oceanography: physical (currents

Case-Study Modelling Analysis of Hydrodynamics in the Nearshore of the Baltic Sea Forced by Extreme Along-shore Wind in the Case of a Cross-shore Obstacle

In the current study we use a three-dimensional model with hydrodynamic and spectral wave modules operating in a coupled mode to simulate the response of currents and wind wave fields to winds of 20–25 m/sec offshore of the protective structure of the Saint Petersburg Flood Prevention Facility Complex. The model was calibrated against field data, which allowed us to obtain a tool describing storm situations in the eastern part of the Gulf of Finland with a satisfactory accuracy. The numerical modeling showed that the protective dam did not have a noticeable effect on the levels of stormsurge, significantwave height, or current speed in areas seaward of the dam. The increase in erosion processes on the southern shore of the easternmost part of the Gulf of Finland in recent past has most probably been related to other factors. We found that if a west or south-west wind of at least 25 m/s blows over the Baltic Sea for at least 16 hours, the level of storm surges seaward of the dam may reach 3 or more meters. An artificial strengthening of the coastline and the creation of shore protection structures are recommended

Wind influence on the formation of nearshore currents in the southern Baltic: mumerical modelling results

A two-dimensional numerical model was used for a simulation of vertical average longshore currents generated by both wind friction and wind-wave action in the nearshore zone. The modelling domain includes the southern part of the Baltic Proper (all boundaries were closed). Wind, uniform in space and varying in time, was the only forcing in the model. The correlation coefficient higher than 0.8 was obtained by model calibration versus the field measurements of currents conducted at the Lubiatowo field station (southern Baltic) during about 1.5 months in 2006. Comparative simulations of total currents including both wind-induced drift and wave components, and of total currents including only a wind-induced drift component, showed that the input of the drift component into currents in the nearshore zone is greater than commonly believed. Wind-induced drift strongly dominates outside the zone of wave transformation, and its input into the total resulting currents remains noticeable even in a zone between the shoreline and the depth of the first wave breaking. Thus, wind-induced drift constitutes up to 50% of the resulting longshore currents for longshore winds and no less than 20% of the longshore component of currents for winds at 45 degrees to the longshore direction

Natural Evolution of Western Shore of a Sambian Peninsula on Completion of Dumping from an Amber Mining Plant

This article shows how dumping of sediments from an amber mining plant prevented erosion of the western shore of the Sambian Peninsula (in Kaliningrad Oblast). The average annual dynamics of coastal areas in the vicinity of the former dumping site of the amber mining plant is described. Nowadays the erosion is continuing after cessation of dumping. The rate of erosion was estimated by results of regular monitoring measurements, using airborne laser scanning. It was found that about 250000 cubic metres per year of local material is needed every year to prevent further erosion and retreat of the shore