FORGE: Enhancing elearning and research in ICT through remote experimentation

This paper presents the Forging Online Education through FIRE (FORGE) initiative, which aims to transform the Future Internet Research and Experimentation (FIRE) testbed facilities, already vital for European research, into a learning resource for higher education. From an educational perspective this project aims at promoting the notion of Self-Regulated Learning (SRL) through the use of a federation of high- performance testbeds and at building unique learning paths based on the integration of a rich linked-data ontology. Through FORGE, traditional online courses will be complemented with interactive laboratory courses. It will also allow educators to efficiently create, use and re-use FIRE-based learning experiences through our tools and techniques. And, most importantly, FORGE will enable equity of access to the latest ICT systems and tools independent of location and at low cost, strengthening the culture of online experimentation tools and remote facilities

FORGE Toolkit: Leveraging Distributed Systems in eLearning Platforms

While more and more services become virtualised and always accessible in our society, laboratories supporting Computer Science (CS) lectures have mainly remained offline and class-based. This apparent abnormality is due to several limiting factors, discussed in the literature, such as the high cost of deploying and maintaining computer network testbeds and the lack of standardisation for the presentation of eLearning platforms. In this paper, we present the FORGE toolkit, which leverages experimentation facilities currently deployed in international initiatives for the development of e-learning materials. Thus, we solve the institutional challenge mentioned in the ACM/IEEE 2013 CS curricula concerning the access and maintenance of specialised and heterogeneous hardware thanks to a seamless integration with the networking testbed community. Moreover, this project builds an ecosystem where teaching and educational materials, tools and experiments are available under open scheme and policies. We demonstrate how it already meets most of the requirements from the Network and Communication component of CS 2013 and some of the labs of the Cisco academy. Finally, we present experience reports illustrating the potential benefits of this framework based on first deployments in four post-graduate courses in prestigious institutions around the world

5G-PPP Software Network Working Group:Network Applications: Opening up 5G and beyond networks 5G-PPP projects analysis, Version 2

It is expected that the communication fabric and the way network services are consumed will evolve towards 6G, building on and extending capabilities of 5G and Beyond networks. Service APIs, Operation APIs, Network APIs are different aspects of the network exposure, which provides the communication service providers a way to monetize the network capabilities. Allowing the developer community to use network capabilities via APIs is an emerging area for network monetization. Thus, it is important that network exposure caters for the needs of developers serving different markets, e.g., different vertical industry segments. The concept of “Network Applications” is introduced following this idea. It is defined as a set of services that provides certain functionalities to verticals and their associated use cases. The Network Applications is more than the introduction of new vertical applications that have interaction capabilities. It refers to the need for a separate middleware layer to simplify the implementation and deployment of vertical systems on a large scale. Specifically, third parties or network operators can contribute to Network Applications, depending on the level of interaction and trust. In practice, a Network Application uses the exposed APIs from the network and can either be integrated with (part of) a vertical application or expose its APIs (e.g., service APIs) for further consumption by vertical applications. This paper builds on the findings of the white paper released in 2022. It targets to go into details about the implementations of the two major Network Applications class: “aaS” and hybrid models. It introduces the Network Applications marketplace and put the light on technological solution like CAMARA project, as part of the standard landscape. <br/

Control plane extension - Status of the SFA deployment

FP7 OpenLab project deliverable D1.2This document describes the progress made within Work Package 1 "Control Plane Extensions" over the second year of the OpenLab project

5G-PPP Software Network Working Group:Network Applications: Opening up 5G and beyond networks 5G-PPP projects analysis

As part of the 5G-PPP Initiative, the Software Network Working Group prepared this white paper to demystify the concept of the Network Applications. In fact, the Network Application ecosystem is more than the introduction of new vertical applications that have interaction capabilities. It refers to the need for a separate middleware layer to simplify the implementation and deployment of vertical systems on a large scale. Specifically, third parties or network operators can contribute to Network Applications, depending on the level of interaction and trust. Different implementations have been conducted by the different projects considering different API types and different level of trust between the verticals and the owner of 5G platforms. In this paper, the different approaches considered by the projects are summarized. By analysing them, it appears three options of interaction between the verticals and the 5G platform owner: - aaS Model: it is the model where the vertical application consumes the Network Applications as a service. The vertical application deployed in the vertical service provider domain. It connects with the 3GPP network systems (EPS, 5GS) in one or more PLMN operator domain. - Hybrid: it is the model where the vertical instantiates a part of its Vertical App in the operator domain like the EDGE. The other part remains in the vertical domain. A similar approach has been followed in TS 23.286 related to the deployment of V2X server. - Coupled/Delegated: it is the model where the vertical delegates its app to the operator. The Network Applications will be composed and managed by the operator. This approach is the one followed in the platforms like 5G-EVE. In addition, the paper brings an analysis of the different API type deployed. It appears that the abstraction from network APIs to service APIs is necessary to hide the telco complexity making APIs easy to consume for verticals with no telco expertise and to adress data privacy requirements

Towards continuously programmable networks

While programmability has been a feature of network devices for a long time, the past decade has seen significant enhancement of programming capability for network functions and nodes, spearheaded by the ongoing trend towards softwarization and cloudification. In his context, new design principles and technology enablers are introduced (Section 7.2) which reside at: (i) service/application provisioning level, (ii) network and resource management level, as well as (iii) network deployment and connectivity level

A tool supported development process for the design of industrial control applications

Following technology’s trends, engineers in the industrial and control sector continuously face problems on developing distributed industrial control applications that should meet various functional, interface, operational and performance requirements by conforming on engineering concerns such as maintainability and reliability. During the development of industrial applications, engineers deal with aspects on device compatibility, software compatibility and software reusability. To deal with these challenges, control engineers are underway in applying Software Engineering practices in the development process of distributed industrial control applications that will enhance reusability, maintainability and will be independent of the underlying platform. A proof of this motion is the standard 61499 of the International Electrotechnical Commission (IEC) which is affected from practices and current trends in Software Engineering. The IEC 61499 standard extends the FB concept of IEC1131 to share many of the well defined and already widely acknowledged benefits of concepts introduced by object technology. This standard describes also a methodology that defines the FB as the main building block and specifies the way that FBs can be used to define robust, re-usable software components that constitute complex IPMCSs. Complete control applications, can be built from networks of FBs that are formed by interconnecting their inputs and outputs. IEC 61499 proposes also that, Engineering Support Systems (ESSs) are highly required to support the whole development process. This dissertation presents a new approach for the design of distributed industrial control applications or Industrial Process Measurement and Control Systems (IPMCSs) as defined in the IEC 61499. The approach defines a methodology for the analysis phase, based on object-oriented concepts, and mainly focuses in the requirements specification and the transformation from the analysis model to the design model. The approach is based on properly defined concepts and adopts modern techniques and latest trends from Software Engineering such as the concept of metamodeling, Model Driven Development (MDL), the Unified Modeling language (UML), UML extensions as defined in UML profiles and applies them to the design of distributed industrial control applications. For the transition from requirements specification to design models a set of transformation rules is presented, formally specified by means of the Object Constraint Language, that are used to later to automate the transition process. Towards the automation and the exploitation from control engineers of the proposed approach, a prototype ESS that supports the development process and is compatible with IEC61499 was implemented. The ESS named CORFU ESS comes to support all the phases of the proposed process: the object-oriented analysis, the automated transformation process from the analysis to the design model, the design with Function Blocks as proposed from the IEC 61499 standard, the verification of Function Block diagrams and the distribution of Function Blocks to industrial field devices. In order to verify the development process, several case studies have been designed and are presented in the context of this dissertation in order to prove: the applicability of the proposed approach, the effectiveness of the implemented prototype ESS and the ability of the approach to cover small and large scale applications.Η αναβάθμιση της διαδικασίας ανάπτυξης εφαρμογών λογισμικού που αφορούν τον έλεγχο βιομηχανικών συστημάτων, είναι ένα θέμα που απασχολεί για δεκαετίες του μηχανικούς ελέγχου αλλά και τους μηχανικούς λογισμικού. Κατά την ανάπτυξη των βιομηχανικών εφαρμογών, οι μηχανικοί καλούνται να ικανοποιήσουν πληθώρα απαιτήσεων μεταξύ των οποίων: συμβατότητα με το υπάρχον εγκατεστημένο υλικό, συμβατότητα με τις ήδη εγκατεστημένες παλαιότερες εφαρμογές και επαναχρησιμοποίηση τμημάτων λογισμικού. Για τους παραπάνω λόγους, αναζητούνται συνεχώς λύσεις οι οποίες: θα προσφέρουν μια περισσότερο φιλική προς το μηχανικό ελέγχου διαδικασία ανάπτυξης η οποία θα υποστηρίζει επεκτασιμότητα των εφαρμογών, θα διευκολύνει την επαναχρησιμοποίηση τμημάτων του λογισμικού, θα ενισχύει την συντήρηση του λογισμικού και θα είναι ανεξάρτητη από το υλικό εκτέλεσης των βιομηχανικών συστημάτων. Η International Electrotechnical Commission (IEC) για να αντιμετωπίσει τις απαιτήσεις των σύγχρονων συστημάτων δημιούργησε το πρότυπο IEC61499 το οποίο έρχεται να επεκτείνει το Function Block του IEC61131. Το IEC61499, καθορίζει μια μεθοδολογία σχεδιασμού, όπου το Function Block είναι το βασικό δομικό συστατικό για την ανάπτυξη διαλειτουργικών κατανεμημένων εφαρμογών αυτοματισμού και ελέγχου. Οι εφαρμογές ελέγχου μπορούν να υλοποιηθούν από Function Block δίκτυα διασυνδέοντας τις εισόδους και εξόδους τους. Το IEC61499 προτείνει επίσης τον σχεδιασμό εργαλείων λογισμικού για την υποστήριξη (εν μέρει αυτοματοποίηση) της διαδικασίας ανάπτυξης. Στην παρούσα διατριβή, παρουσιάζεται μια νέα προσέγγιση για τον σχεδιασμό κατανεμημένων βιομηχανικών εφαρμογών και πιο συγκεκριμένα Συστημάτων Μέτρησης και Ελέγχου Βιομηχανικών Διεργασιών1 (IPMCSs) όπως τα ορίζει το πρότυπο IEC. Η προσέγγιση εστιάζει στον ορισμό μιας μεθοδολογίας για την φάση της ανάλυσης και κύρια την τεκμηρίωση των απαιτήσεων και τον μετέπειτα μετασχηματισμό του μοντέλου ανάλυσης σε μοντέλο σχεδιασμού. Η προτεινόμενη προσέγγιση βασίζεται σε κατάλληλα οριζόμενες έννοιες και τεχνικές και αξιοποιεί τελευταίες τάσεις από το χώρο της Μηχανιστικής Λογισμικού (Software Engineering), όπως είναι η έννοια της μετα-μοντελοποίησης (Meta-modeling) όπως αυτή ορίζεται στα πλαίσια της βασισμένης σε μοντέλα ανάπτυξης (Model Driven Development) και της Unified Modeling Language (UML) και των επεκτάσεων της (UML Profiles) και εφαρμογή αυτών στο σχεδιασμό βιομηχανικών εφαρμογών. Για την ομαλή μετάβαση από τις καταγεγραμμένες απαιτήσεις σε μοντέλα σχεδιασμού τεκμηριώθηκε και παρουσιάζεται ένα σύνολο κανόνων μετασχηματισμού το οποίο περιγράφηκε αυστηρά με χρήση της Object Constraint Language. Για να αξιοποιηθεί η προτεινόμενη προσέγγιση από μηχανικούς ελέγχου, σχεδιάστηκε και υλοποιήθηκε ένα εργαλείο λογισμικού συμβατό με το πρότυπο IEC61499. Το εργαλείο που έχει το όνομα CORFU ESS έρχεται να υποστηρίξει: α) την φάση της ανάλυσης, β) τον μετασχηματισμό του μοντέλου ανάλυσης σε μοντέλο σχεδιασμού, γ) τον σχεδιασμό εφαρμογών με Function Blocks όπως ορίζει το IEC61499, δ) την κατανομή των Function Block στις συσκευές των βιομηχανικών δικτύων και ε) τον έλεγχο των τελικών Function Block δικτύων. Η προσέγγιση εφαρμόσθηκε σε μελέτες περίπτωσης για να επιδείξει την εφαρμοσιμότητα της προτεινόμενης διαδικασίας, την αποτελεσματικότητα του εργαλείου που αναπτύχθηκε και την δυνατότητα της διαδικασίας και του εργαλείου να καλύψουν απαιτήσεις μικρής ή μεγάλης κλίμακας εφαρμογών