15,876 research outputs found
New negative differential resistance device based on resonant interband tunneling
We propose and demonstrate a novel negative differential resistance device based on resonant interband tunneling. Electrons in the InAs/AlSb/GaSb/AlSb/InAs structure tunnel from the InAs conduction band into a quantized state in the GaSb valence band, giving rise to a peak in the current-voltage characteristic. This heterostructure design virtually eliminates many of the competing transport mechanisms which limit the performance of conventional double-barrier structures. Peak-to-valley current ratios as high as 20 and 88 are observed at room temperature and liquid-nitrogen temperature, respectively. These are the highest values reported for any tunnel structure
Observation of large peak-to-valley current ratios and large peak current densities in AlSb/InAs/AlSb double-barrier tunnel structures
We report improved peak-to-valley current ratios and peak current densities in InAs/AlSb double-barrier, negative differential resistance tunnel structures. Our peak-to-valley current ratios are 2.9 at room temperature and 10 at liquid-nitrogen temperatures. Furthermore, we have observed peak current densities of 1.7×10^5 A/cm^2. These figures of merit are substantially better than previously reported values. The improvements are obtained by adding spacer layers near the barriers, thinner well regions, and thinner barriers
Demonstration of large peak-to-valley current ratios in InAs/AlGaSb/InAs single-barrier heterostructures
We report large peak-to-valley current ratios in InAs/AlxGa1−xSb/InAs single-barrier tunnel structures. The mechanism for single-barrier negative differential resistance (NDR) has been proposed and demonstrated recently. A peak-to-valley current ratio of 3.4 (1.2) at 77 K (295 K), which is substantially larger than what has been previously reported, was observed in a 200-Å-thick Al0.42Ga0.58Sb barrier. A comparison with a calculated current-voltage curve yields good agreement in terms of peak current and the slope of the NDR region. The single-barrier structure is a candidate for high-speed devices because of expected short tunneling times and a wide NDR region
Large Universality of The Baryon Isgur--Wise Form Factor: The Group Theoretical Approach
In a previous article, it has been proved under the framework of chiral
soliton model that the same Isgur--Wise form factor describes the semileptonic
and decays in the
large limit. It is shown here that this result is in fact independent of
the chiral soliton model and is solely the consequence of the spin-flavor SU(4)
symmetry which arises in the baryon sector in the large limit.Comment: 10 pages in REVTeX, no figure
Type II superlattices for infrared detectors and devices
Superlattices consisting of combinations of III-V semiconductors with type II band alignments are of interest for infrared applications because their energy gaps can be made smaller than those of any 'natural' III-V compounds. Specifically, it has been demonstrated that both InSb/InAsxSb1-x superlattices and Ga1-xInxSb/InAs superlattices can possess energy gaps in the 8-14 mu m range. The efforts have focused on the Ga1-xInxSb/InAs system because of its extreme broken gap band alignment, which results in narrow energy gaps for very short superlattice periods. The authors report the use of in situ chemical doping of Ga1-xInxSb/InAs superlattices to fabricate p-n photodiodes. These diodes display a clear photovoltaic response with a threshold near 12 mu m. They have also attained outstanding structural quality in Ga1-xInxSb/InAs superlattices grown on radiatively heated GaSb substrates. Cross-sectional transmission electron microscope images of these superlattices display no dislocations, while high resolution X-ray diffraction scans reveal sharp high-order superlattice satellites and strong Pendellosung fringes
Electrical determination of the valence-band discontinuity in HgTe-CdTe heterojunctions
Current-voltage behavior is studied experimentally in a Hg0.78Cd0.22Te-CdTe-Hg0.78Cd0.22Te heterostructure grown by molecular beam epitaxy. At temperatures above 160 K, energy-band diagrams suggest that the dominant low-bias current is thermionic hole emission across the CdTe barrier layer. This interpretation yields a direct determination of 390±75 meV for the HgTe-CdTe valence-band discontinuity at 300 K. Similar analyses of current-voltage data taken at 190–300 K suggest that the valence-band offset decreases at low temperatures in this heterojunction
Experimental observation of negative differential resistance from an InAs/GaSb interface
We have observed negative differential resistance at room temperature from devices consisting of a single interface between n-type InAs and p-type GaSb. InAs and GaSb have a type II staggered band alignment; hence, the negative differential resistance arises from the same mechanism as in a p+-n+ tunnel diode. Room-temperature peak current densities of 8.2×10^4 A/cm^2 and 4.2×10^4 A/cm^2 were measured for structures with and without undoped spacer layers at the heterointerface, respectively
Ricci Solitons and Einstein-Scalar Field Theory
B List has recently studied a geometric flow whose fixed points correspond to
static Ricci flat spacetimes. It is now known that this flow is in fact Ricci
flow modulo pullback by a certain diffeomorphism. We use this observation to
associate to each static Ricci flat spacetime a local Ricci soliton in one
higher dimension. As well, solutions of Euclidean-signature Einstein gravity
coupled to a free massless scalar field with nonzero cosmological constant are
associated to shrinking or expanding Ricci solitons. We exhibit examples,
including an explicit family of complete expanding solitons which can be
thought of as a Ricci flow for a complete Lorentzian metric. The possible
generalization to Ricci-flat stationary metrics leads us to consider an
alternative to Ricci flow.Comment: 17 pages, 1 figure; Revised version (organizational changes, other
minor revisions and corrections, citations corrected and added), to appear in
CQ
- …