62 research outputs found

    FK506-binding protein-like and FK506-binding protein 8 regulate dual leucine zipper kinase degradation and neuronal responses to axon injury

    Get PDF
    The dual leucine zipper kinase (DLK) is a key regulator of axon regeneration and degeneration in response to neuronal injury; however, regulatory mechanisms of the DLK function via its interacting proteins are largely unknown. To better understand the molecular mechanism of DLK function, we performed yeast two-hybrid screening analysis and identified FK506-binding protein-like (FKBPL, also known as WAF-1/CIP1 stabilizing protein 39) as a DLK-binding protein. FKBPL binds to the kinase domain of DLK and inhibits its kinase activity. In addition, FKBPL induces DLK protein degradation through ubiquitin-dependent pathways. We further assessed other members in the FKBP protein family and found that FK506-binding protein 8 (FKBP8) also induced DLK degradation. We identified the lysine 271 residue in the kinase domain as a major site of DLK ubiquitination and SUMO3 conjugation and was thus responsible for regulating FKBP8-mediated proteasomal degradation that was inhibited by the substitution of the lysine 271 to arginine. FKBP8-mediated degradation of DLK is mediated by autophagy pathway because knockdown of Atg5 inhibited DLK destabilization. We show that in vivo overexpression of FKBP8 delayed the progression of axon degeneration and suppressed neuronal death after axotomy in sciatic and optic nerves. Taken together, this study identified FKBPL and FKBP8 as novel DLK-interacting proteins that regulate DLK stability via the ubiquitin-proteasome and lysosomal protein degradation pathways

    Facile electrodeposition of high-density CuCo2O4 nanosheets as a high-performance Li-ion battery anode material

    Get PDF
    High-density CuCo2O4 nanosheets are grown on Ni foam using electrodeposition followed by air annealing for a Li-ion battery anode. The anode exhibits a high discharge capacity of 1244 mAh/g at 0.1 A/g (82% coulombic efficiency) and excellent high-rate performance with 95% capacity retention (1100 mAh/g after 200 cycles at 1 A/g). The outstanding battery performance of the CuCo2O4 anode is attributed to its binder-free direct contact to the current collector and high-density nanosheet morphology. The present experimental findings demonstrate that the electrodeposited binder-free CuCo2O4 material may serve as a safe, low-cost, long-cycle life anode for Li-ion batteries

    Nanoflake NiMoO4 based smart supercapacitor for intelligent power balance monitoring.

    Get PDF
    A supercapacitor is well recognized as one of emerging energy sources for powering electronic devices in our daily life. Although various kind of supercapacitors have been designed and demonstrated, their market aspect could become advanced if the utilisation of other physicochemical properties (e.g. optical) is incorporated in the electrode. Herein, we present an electrochromic supercapacitor (smart supercapacitor) based on a nanoflake NiMoO4 thin film which is fabricated using a facile and well-controlled successive ionic layer adsorption and reaction (SILAR) technique. The polycrystalline nanoflake NiMoO4 electrode exhibits a large electrochemically active surface area of ~ 96.3 cm2. Its nanoporous architecture provides an easy pathway for the intercalation and de-intercalation of ions. The nanoflake NiMoO4 electrode is dark-brown in the charged state and becomes transparent in the discharged state with a high optical modulation of 57%. The electrode shows a high specific capacity of 1853 Fg–1 at a current rate of 1 Ag–1 with a good coloration efficiency of 31.44 cm2/C. Dynamic visual information is obtained when the electrode is charged at different potentials, reflecting the level of energy storage in the device. The device retains 65% capacity after 2500 charge-discharge cycles compared with its initial capacity. The excellent performance of the nanoflake NiMoO4 based smart supercapacitor is associated with the synergetic effect of nanoporous morphology with a large electrochemically active surface area and desired chemical composition for redox reaction

    Influence of operating temperature on Li2ZnTi3O8 anode performance and high-rate charging activity of Li-ion battery

    Get PDF
    The temperature-dependent performance of a Li2ZnTi3O8 (LZTO) anode and the ultrafast-charging activity of a Li-ion battery were investigated. The LZTO anode operates at different temperatures between − 5 and 55 °C and in this work its sustainability is discussed in terms of storage performance. It delivered a discharge capacity of 181.3 mA h g−1 at 25 °C, which increased to 227.3 mA h g−1 at 40 °C and 131.2 mA h g−1 at − 5 °C. The variation in the discharge capacity with temperature is associated with the reaction kinetics and the change in internal resistance. It showed a capacity retention of 64% and a coulombic efficiency of 98% over 500 cycles. Exhibiting a discharge capacity of 107 mA h g−1, the LZTO anode was sustainable over 100 charge-discharge cycles at an ultra-high charging rate of 10 Ag−1. The reaction kinetics estimated from a cyclic voltammetry analysis at high scan rates revealed a capacitive-type storage mechanism

    Self-assembled nanostructured CuCo2 O4 for electrochemical energy storage and the oxygen evolution reaction via morphology engineering

    Get PDF
    CuCo2O4 films with different morphologies of either mesoporous nanosheets, cubic, compact‐granular, or agglomerated embossing structures are fabricated via a hydrothermal growth technique using various solvents, and their bifunctional activities, electrochemical energy storage and oxygen evolution reaction (OER) for water splitting catalysis in strong alkaline KOH media, are investigated. It is observed that the solvents play an important role in setting the surface morphology and size of the crystallites by controlling nucleation and growth rate. An optimized mesoporous CuCo2O4 nanosheet electrode shows a high specific capacitance of 1658 F g−1 at 1 A g−1 with excellent restoring capability of ≈99% at 2 A g−1 and superior energy density of 132.64 Wh kg−1 at a power density of 0.72 kW kg−1. The CuCo2O4 electrode also exhibits excellent endurance performance with capacity retention of 90% and coulombic efficiency of ≈99% after 5000 charge/discharge cycles. The best OER activity is obtained from the CuCo2O4 nanosheet sample with the lowest overpotential of ≈290 mV at 20 mA cm−2 and a Tafel slope of 117 mV dec−1. The superior bifunctional electrochemical activity of the mesoporous CuCo2O4 nanosheet is a result of electrochemically favorable 2D morphology, which leads to the formation of a very large electrochemically active surface area

    Assessment of the conventional radial artery with optical coherent tomography after the snuffbox approach

    Get PDF
    Background: This study aimed to evaluate acute injuries of the radial artery (RA) using optical coherence tomography (OCT) in patients who underwent coronary intervention via the snuffbox approach. Methods: Forty-six patients, who underwent coronary intervention and assessment of the conventional RA using OCT via the snuffbox approach, were enrolled from two university hospitals between August 2018 and August 2019. Results: The mean age of the patients was 65.1 years. In this study population, 6-French (Fr) sheaths were used. The mean diameter of the conventional RA was 2.89 ± 0.33 mm, and the mean lumen area of the conventional RA was 6.68 ± 1.56 mm2. Acute injuries of the conventional RA, after the snuffbox approach, were observed in 5 (10.9%) patients. Intimal tear was observed in the RA in 1 (2.2%) case. Intraluminal thrombi, without vessel injuries, were detected in the RA in 4 (8.7%) cases. However, medial dissection was not observed in the OCT analysis. Conclusions: This retrospective OCT-based study showed that the diameter of the conventional RA was 2.89 mm and acute vessel injury of the conventional RA was rare in patients who underwent coronary intervention via the snuffbox approach

    Self-assembled two-dimensional copper oxide nanosheet bundles as an efficient oxygen evolution reaction (OER) electrocatalyst for water splitting applications

    Get PDF
    A high activity of a two-dimensional (2D) copper oxide (CuO) electrocatalyst for the oxygen evolution reaction (OER) is presented. The CuO electrode self-assembles on a stainless steel substrate via chemical bath deposition at 80 °C in a mixed solution of CuSO4 and NH4OH, followed by air annealing treatment, and shows a 2D nanosheet bundle-type morphology. The OER performance is studied in a 1 M KOH solution. The OER starts to occur at about 1.48 V versus the RHE (η = 250 mV) with a Tafel slope of 59 mV dec−1 in a 1 M KOH solution. The overpotential (η) of 350 mV at 10 mA cm−2 is among the lowest compared with other copper-based materials. The catalyst can deliver a stable current density of >10 mA cm−2 for more than 10 hours. This superior OER activity is due to its adequately exposed OER-favorable 2D morphology and the optimized electronic properties resulting from the thermal treatment
    corecore