5,060 research outputs found
A geometric basis for the standard-model gauge group
A geometric approach to the standard model in terms of the Clifford algebra
Cl_7 is advanced. A key feature of the model is its use of an algebraic spinor
for one generation of leptons and quarks. Spinor transformations separate into
left-sided ("exterior") and right-sided ("interior") types. By definition,
Poincare transformations are exterior ones. We consider all rotations in the
seven-dimensional space that (1) conserve the spacetime components of the
particle and antiparticle currents and (2) do not couple the right-chiral
neutrino. These rotations comprise additional exterior transformations that
commute with the Poincare group and form the group SU(2)_L, interior ones that
constitute SU(3)_C, and a unique group of coupled double-sided rotations with
U(1)_Y symmetry. The spinor mediates a physical coupling of Poincare and
isotopic symmetries within the restrictions of the Coleman--Mandula theorem.
The four extra spacelike dimensions in the model form a basis for the Higgs
isodoublet field, whose symmetry requires the chirality of SU(2). The charge
assignments of both the fundamental fermions and the Higgs boson are produced
exactly.Comment: 17 pages, LaTeX requires iopart. Accepted for publication in J. Phys.
A: Math. Gen. 9 Mar 2001. Typos correcte
Invasion of the shovelnose ray (Rhinobatos typus) by Neoheterocotyle rhinobatidis and Merizocotyle icopae (Monogenea : Monocotylidae)
This study examined the route of infection by free-swimming larvae of 2 monocotylid monogeneans that inhabit the gills (Neoheterocotyle rhinobatidis) and the nasal tissue (Merizocotyle icopae) of the shovelnose ray, Rhinobatos typus, from Heron Island on the Great Barrier Reef, Australia. Larvae of N. rhinobatidis and M. icopae attached directly to the gills and the nasal tissue of the ray, respectively, and did not first settle on the skin. Initial development of the post-oncomiracidium of N. rhinobatidis was rapid and hamuli formed between 6 and 24 h p.i. at a mean temperature of 26 °C. However, growth then slowed markedly and was variable; only 2 fully mature individuals were found 20 days p.i. at a mean temperature of 24·5 °C. Development of M. icopae was slow and variable throughout; hamuli did not appear until 10 days p.i. and no mature individuals were obtained even 22 days p.i. at a mean temperature of 24·5 °C. No character could be found as an indicator of parasite age for N. rhinobatidis or M. icopae due to the high variability in development in both species.L. A. Chisholm and I. D. Whittingto
Alcohol Fuel Cells at Optimal Temperatures
High-power-density alcohol fuel cells can relieve many of the daunting challenges facing a hydrogen energy economy. Here, such fuel cells are achieved using CsH2PO4 as the electrolyte and integrating into the anode chamber a Cu-ZnO/Al2O3 methanol steam-reforming catalyst. The temperature of operation, ~250°C, is matched both to the optimal value for fuel cell power output and for reforming. Peak power densities using methanol and ethanol were 226 and 100 mW/cm^2, respectively. The high power output (305 mW/cm^2) obtained from reformate fuel containing 1% CO demonstrates the potential of this approach with optimized reforming catalysts and also the tolerance to CO poisoning at these elevated temperatures
Polymer solid acid composite membranes for fuel-cell applications
A systematic study of the conductivity of polyvinylidene fluoride (PVDF) and CsHSO4 composites, containing 0 to 100% CsHSO4, has been carried out. The polymer, with its good mechanical properties, served as a supporting matrix for the high proton conductivity inorganic phase. The conductivity of composites exhibited a sharp increase with temperature at 142°C, characteristic of the superprotonic phase transition of CsHSO4. At high temperature (160°C), the dependence of conductivity on vol % CsHSO4 was monotonic and revealed a percolation threshold of ~10 vol %. At low temperature (100°C), a maximum in the conductivity at ~80 vol % CsHSO4 was observed. Results of preliminary fuel cell measurements are presented
Superprotonic phase transition of CsHSO4: A molecular dynamics simulation study
The superprotonic phase transition (phase II --> phase I; 414 K) of cesium hydrogen sulfate, CsHSO4, was simulated using molecular dynamics with the "first principles" MSXX force field (FF). The structure, binding energy, and vibrational frequencies of the CsHSO4 monomer, the binding energy of the (H2SO4)2 dimer, and the torsion barrier of the HSO4- ion were determined from quantum mechanical calculations, and the parameters of the Dreiding FF for Cs, S, O, and H adjusted to reproduce these quantities. Each hydrogen atom was treated as bonded exclusively to a single oxygen atom (proton donor), but allowed to form hydrogen bonds to various second nearest oxygen atoms (proton acceptors). Fixed temperature-pressure (NPT) dynamics were employed to study the structure as a function of temperature from 298 to 723 K. In addition, the influence of several force field parameters, including the hydrogen torsional barrier height, hydrogen bond strength, and oxygen charge distribution, on the structural behavior of CsHSO4 was probed. Although the FF does not allow proton migration (i.e., proton jumps) between oxygen atoms, a clear phase transition occurred as demonstrated by a discrete change of unit cell symmetry (monoclinic to tetragonal), cell volume, and molar enthalpy. The dynamics of the HSO4- group reorientational motion also changed dramatically at the transition. The observation of a transition to the expected tetragonal phase using a FF in which protons cannot migrate indicates that proton diffusion does not drive the transition to the superprotonic phase. Rather, high conductivity is a consequence of the rapid reorientations that occur in the high temperature phase. Furthermore, because no input from the superprotonic phase was employed in these simulations, it may be possible to employ MD to hypothesize superprotonic materials
Engineering the Next Generation of Solid State Proton Conductors: Synthesis and Properties of Ba_(3−x)K_(x)H_(x)(PO_4)_2
A new series of compounds with general chemical formula Ba_(3−x)K_(x)H_(x)(PO_4)_2 has been successfully prepared. This particular stoichiometry was targeted as a candidate solid-state proton conductor because of its anticipated structural similarity to known M_(3)H(XO_4)_2 superprotonic conductors (M = Cs, Rb, NH4, K; X = Se, S) and to the known trigonal compound Ba_(3)(PO_4)_2. The materials were synthesized from aqueous solution using barium acetate, dipotassium hydrogen phosphate, and potassium hydroxide as starting materials. Through variations in the initial solution stoichiometry or the synthesis temperature, the final stoichiometry could be controlled from x ~ 0.5 to ~1. X-ray powder diffraction, energy dispersive spectroscopy chemical analysis, ^(1)H magic angle spinning (MAS) nuclear magnetic spectroscopy, and thermogravimetric analysis were all employed to establish potassium and proton incorporation. The diffraction data confirmed crystallization of a trigonal phase, and chemical analysis showed the (Ba+K):P ratio to be 3:2, consistent with the target stoichiometry. The conductivity of the Ba_(3−x)K_(x)H_(x)(PO_4)_2 materials, as measured by A.C. impedance spectroscopy, is about 3 orders of magnitude greater than the end-member Ba_(3)(PO_4)_2 material with only a slight dependence on x, however, it is substantially lower than that of typical superprotonic conductors and of the M_(3)H(XO_4)_2 materials in particular. The close proximity of Ba to the hydrogen bond site is proposed to explain this behavior. At 250 °C, the conductivity is 2.4 × 10^(−5) S/cm for the composition x = 0.80, which, when combined with the water insolubility and the relatively high thermal stability, may render Ba_(3−x)K_(x)H_(x)(PO_4)_2 an attractive alternative in selected electrochemical applications to known superprotonic conductors
Do galaxies that leak ionizing photons have extreme outflows?
To reionize the early universe, high-energy photons must escape the galaxies
that produce them. It has been suggested that stellar feedback drives galactic
outflows out of star-forming regions, creating low density channels through
which ionizing photons escape into the inter-galactic medium. We compare the
galactic outflow properties of confirmed Lyman continuum (LyC) leaking galaxies
to a control sample of nearby star-forming galaxies to explore whether the
outflows from leakers are extreme as compared to the control sample. We use
data from the Cosmic Origins Spectrograph on the Hubble Space Telescope to
measure the equivalent widths and velocities of Si II and Si III absorption
lines, tracing neutral and ionized galactic outflows. We find that the Si II
and Si III equivalent widths of the LyC leakers reside on the low-end of the
trend established by the control sample. The leakers' velocities are not
statistically different than the control sample, but their absorption line
profiles have a different asymmetry: their central velocities are closer to
their maximum velocities. The outflow kinematics and equivalent widths are
consistent with the scaling relations between outflow properties and host
galaxy properties -- most notably metallicity -- defined by the control sample.
Additionally, we use the Ly\alpha\ profiles to show that the Si II equivalent
width scales with the Ly\alpha\ peak velocity separation. We determine that the
low equivalent widths of the leakers are likely driven by low metallicities and
low H I column densities, consistent with a density-bounded ionization region,
although we cannot rule out significant variations in covering fraction. While
we do not find that the LyC leakers have extreme outflow velocities, the low
maximum-to-central velocity ratios demonstrate the importance of the
acceleration and density profiles for LyC and Ly\alpha\ escape. [abridged]Comment: 17 pages, 8 Figures. Accepted for publication in Astronomy &
Astrophysic
Solid acid proton conductors: from laboratory curiosities to fuel cell electrolytes
The compound CsH2PO4 has emerged as a viable electrolyte for intermediate temperature (200–300 °C) fuel cells. In order to settle the question of the high temperature behavior of this material, conductivity measurements were performed by two-point AC impedance spectroscopy under humidified conditions (p[H2O] = 0.4 atm). A transition to a stable, high conductivity phase was observed at 230 °C, with the conductivity rising to a value of 2.2 × 10^–2 S cm^–1 at 240 °C and the activation energy of proton transport dropping to 0.42 eV. In the absence of active humidification, dehydration of CsH2PO4 does indeed occur, but, in contradiction to some suggestions in the literature, the dehydration process is not responsible for the high conductivity at this temperature. Electrochemical characterization by galvanostatic current interrupt (GCI) methods and three-point AC impedance spectroscopy (under uniform, humidified gases) of CsH2PO4 based fuel cells, in which a composite mixture of the electrolyte, Pt supported on carbon, Pt black and carbon black served as the electrodes, showed that the overpotential for hydrogen electrooxidation was virtually immeasurable. The overpotential for oxygen electroreduction, however, was found to be on the order of 100 mV at 100 mA cm^–2. Thus, for fuel cells in which the supported electrolyte membrane was only 25 µm in thickness and in which a peak power density of 415 mW cm^–2 was achieved, the majority of the overpotential was found to be due to the slow rate of oxygen electrocatalysis. While the much faster kinetics at the anode over those at the cathode are not surprising, the result indicates that enhancing power output beyond the present levels will require improving cathode properties rather than further lowering the electrolyte thickness. In addition to the characterization of the transport and electrochemical properties of CsH2PO4, a discussion of the entropy of the superprotonic transition and the implications for proton transport is presented
On piezophase effects in mechanically loaded atomic scale Josephson junctions
The response of an intrinsic Josephson contact to externally applied stress
is considered within the framework of the dislocation-induced atomic scale
Josephson effect. The predicted quasi-periodic (Fraunhofer-like)stress-strain
and stress-current patterns should manifest themselves for experimentally
accessible values of applied stresses in intrinsically defected (e.g.,twinned)
crystals.Comment: REVTEX (epsf style), 2 EPS figure
Advanced Electrodes for Solid Acid Fuel Cells by Platinum Deposition on CsH_(2)PO_4
We demonstrate cathodes for solid acid fuel cells fabricated by vapor deposition of platinum from the metalorganic precursor Pt(acac)_2 on the solid acid
CsH_(2)PO_4 at 210 °C. A network of platinum nanoparticles with diameters of 2−4 nm serves as both the oxygen reduction catalyst and the electronic conductor in the electrode. Electrodes with a platinum content of 1.75 mg/cm^2 are more active for oxygen reduction than previously reported electrodes with a platinum content of 7.5 mg/cm^2. Electrodes containing <1.75 mg/cm^2 of platinum show significantly reduced catalytic activity and increased ohmic resistance indicative of a highly discontinuous catalytic-electronic platinum network
- …