21 research outputs found
XPS surface chemical characterization of atmospheric particles of different sizes
Abstract
Surface chemical composition of particles has a key role in determining the reactivity and optical properties of atmospheric aerosol. This composition depend on the particles sources and formation processes and it influences human health and climate. In this work, the X-ray photoelectron spectroscopy (XPS) has been used for the systematic surface characterization of atmospheric particles of different sizes, collected using a 10-stage MOUDI-II rotating cascade impactor in an urban background site. The high resolution XPS spectra allowed to distinguish different organic functional groups (C-C/CC, -C-O, -CO/-C(O)N, -C(O)O, C-O3=) and to speciate the detectable hetero-elements, sulphur (S-O42-, sulphone and sulphide compounds), nitrogen (N-H4+, N-O3-, N-O2- and organic-nitrogen compounds), sodium (Na+) and chlorine (Cl-) species. Significant differences in particles belonging to accumulation (small particles) and coarse (large particles) modes were observed being due to the formation processes and sources from which particles originated. The oxygen concentrations is inversely correlated with carbon concentrations, however, the content of oxidized organic carbon is not correlated with oxygen content confirming that the oxygen increment observed in large particles can likely be attributed to the contribution of inorganic species (crustal origin). The speciation of nitrogen showed ammonium only in the accumulation mode and nitrate only in coarse mode excluding the presence of ammonium nitrate of secondary origin in the area studied. A correlation of Na and Cl was attributed to the marine contribution with an excess of Cl on the surface correlated with the depletion of Cl observed in the bulk of particles. © 2015 Elsevier Ltd
A novel nonenzymatic amperometric hydrogen peroxide sensor based on CuO@Cu2O nanowires embedded into poly(vinyl alcohol)
A new, very simple, rapid and inexpensive nonenzymatic amperometric sensor for hydrogen peroxide (H2O2) detection is proposed. It is based on the immobilization of cupric/cuprous oxide core shell nanowires (CuO@Cu2O-NWs) in a poly(vinyl alcohol) (PVA) matrix directly drop casted on a glassy carbon electrode surface to make a CuO@Cu2O core shell like NWs PVA embedded (CuO@Cu2O-NWs/PVA) sensor. CuO nanowires with mean diameters of 120-170nm and length in the range 2-5μm were grown by a simple catalyst-free thermal oxidation process based on resistive heating of pure copper wires at ambient conditions. The oxidation process of the copper wire surface led to the formation of a three layered structure: a thick Cu2O bottom layer, a CuO thin intermediate layer and CuO nanowires. CuO nanowires were carefully scratched from Cu2O layer with a sharp knife, dispersed into ethanol and sonicated. Then, the NWs were embedded in PVA matrix. The morphological and spectroscopic characterization of synthesized CuO-NWs and CuO@Cu2O-NWs/PVA were performed by transmission electron microscopy (TEM), selected area diffraction pattern (SAD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis. Moreover a complete electrochemical characterization of these new CuO@Cu2O-NWs/PVA modified glassy carbon electrodes was performed by Cyclic Voltammetry (CV) and Cronoamperometry (CA) in phosphate buffer (pH=7; I=0.2) to investigate the sensing properties of this material against H2O2. The electrochemical performances of proposed sensors as high sensitivity, fast response, reproducibility and selectivity make them suitable for the quantitative determination of hydrogen peroxide substrate in batch analysis
Synthesis and Characterization of Te Nanotubes Decorated with Pt Nanoparticles for a Fuel Cell Anode/Cathode Working at a Neutral pH
In fuel-cell technology development, one of the most important objectives is to minimize
the amount of Pt, the most employed material as an oxygen reduction and methanol oxidation
electro-catalyst. In this paper, we report the synthesis and characterization of Te nanotubes (TeNTs)
decorated with Pt nanoparticles, readily prepared from stirred aqueous solutions of PtCl2 containing
a suspension of TeNTs, and ethanol acting as a reducing agent, avoiding the use of any hydrophobic
surfactants such as capping stabilizing substance. The obtained TeNTs decorated with Pt nanoparticles
(TeNTs/PtNPs) have been fully characterized by X-ray diffraction (XRD), transmission electron
microscopy (TEM), selected area diffraction patterns (SAD), X-ray photoelectron spectroscopy (XPS),
and cyclic voltammetry (CV). We demonstrated that the new material can be successfully employed
in fuel cells, either as an anodic (for methanol oxidation reaction) or a cathodic (for oxygen reduction
reaction) electrode, with high efficiency in terms of related mass activities and on-set improvement.
Remarkably, the cell operates in aqueous electrolyte buffered at pH 7.0, thus, avoiding acidic or
alkaline conditions that might lead to, for example, Pt dissolution (at low pH), and paving the way
for the development of biocompatible devices and on-chip fuel cells
Te oxide nanowires as advanced materials for amperometric nonenzymatic hydrogen peroxide sensing
ABSTRACT
A new nonenzymatic platinum Te oxide nanowires modified electrode (Pt/TeO2-NWs) for
amperometric detection of hydrogen peroxide (H2O2) is proposed. The modified electrode has been
developed by direct drop casting, with TeO2 nanowires (TeO2-NWs), synthesized by thermal
evaporation of Te(0) in an oxygen atmosphere. The morphological and spectroscopic
characterization of the TeO2-NWs as synthesized on Pt foil was performed by scanning electron
microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis.
XPS and XRD analysis are especially involved to gain information on the chemical environment of
TeO2-NWs in contact with Pt surface. Moreover electrochemical characterization of these new
modified Pt/TeO2-NWs modified electrodes was performed by Cyclic Voltammetry (CV) and
Cronoamperometry (CA) in phosphate buffer (pH = 7; I = 0.2) to investigate the sensing properties
of this material against H2O2. The proposed sensor exhibits a wide linear and dynamic range from 2
μM to 16 mM (R2 = 0.9998) and the detection limit is estimated to be 0.6 μM (S/N = 3). Moreover,
this sensor shows a rapid amperometric response time of less than 5 s and possessed good
reproducibility. These results indicate that Pt/TeO2-NWs composite is suitable to be used as
material for sensing applications
Influence of Saharan dust outbreaks and carbon content on oxidative potential of water-soluble fractions of PM 2.5 and PM 10
Abstract View references (51)
Exposure to atmospheric particulate matter (PM) leads to adverse health effects although the exact mechanisms of toxicity are still poorly understood. Several studies suggested that a large number of PM health effects could be due to the oxidative potential (OP) of ambient particles leading to high concentrations of reactive oxygen species (ROS). The contribution to OP of specific anthropogenic sources like road traffic, biomass burning, and industrial emissions has been investigated in several sites. However, information about the OP of natural sources are scarce and no data is available regarding the OP during Saharan dust outbreaks (SDO) in Mediterranean regions. This work uses the a-cellular DTT (dithiothreitol) assay to evaluate OP of the water-soluble fraction of PM2.5 and PM10 collected at an urban background site in Southern Italy. OP values in three groups of samples were compared: standard characterised by concentrations similar to the yearly averages; high carbon samples associated to combustion sources (mainly road traffic and biomass burning) and SDO events. DTT activity normalised by sampled air volume (DTTV), representative of personal exposure, and normalised by collected aerosol mass (DTTM), representing source-specific characteristics, were investigated. The DTTV is larger for high PM concentrations. DTTV is well correlated with secondary organic carbon concentration. An increased DTTV response was found for PM2.5 compared to the coarse fraction PM2.5-10. DTTV is larger for high carbon content samples but during SDO events is statistically comparable with that of standard samples. DTTM is larger for PM2.5 compared to PM10 and the relative difference between the two size fractions is maximised during SDO events. This indicates that Saharan dust advection is a natural source of particles having a lower specific OP with respect to the other sources acting on the area (for water-soluble fraction). OP should be taken into account in epidemiological studies to evaluate the potential health risks associated to ROS in regions affected by high pollution events due to Saharan dust advection
Characterization of TeO2 nanowires for amperometric application as bimetallic non-enzymatic hydrogen peroxide sensor
Caratterizzazione spettroscopica ed elettrochimica di nanoparticelle di Ag disperse in un film di polivinil alcol. Applicazioni nella rivelazione amperometrica di perossido d’idrogeno.
Oxidative potential of PM2.5 and PM10 in an urban background site in Lecce: influence of combustion sources and Saharan dust advection
Exposure to atmospheric particulate matter (PM) leads to adverse health effects and the exact mechanisms of toxicity are still not completely understood. Recent studies suggested that a large number of PM health effects could be due to the oxidative potential (OP) of ambient particles leading to high concentrations of reactive oxygen species (ROS). However, information about the OP of natural sources are scarce and no data is available regarding the OP during Saharan dust outbreaks (SDO) in Mediterranean regions. This work uses the a-cellular DTT (dithiothreitol) assay to evaluate OP of the water-soluble fraction of PM2. 5 and PM10 collected at an urban background site in Southern Ital
Ag nanoparticles capped by a nontoxic polymer: Electrochemical and spectroscopic characterization of a novel nanomaterial for glucose detection
Modified electrodes with metal or metal oxides nanoparticles are particularly appealing to improve sensor performances and fabricate miniaturized devices, as required also in glucose detection. A Pt electrode modified by drop casting of a novel nanostructured film based on silver nanoparticles (Ag-NPs) capped in a commercial nontoxic polyvinyl alcohol (PVA) matrix is proposed here as a valid alternative to classical glucose (bio)sensors. The extensive electrochemical and spectroscopic characterization by X-ray Photoelectron Spectroscopy (XPS) of this advanced nanomaterial is presented to study its response to glucose and to investigate the chemical nature of deposited Ag