7 research outputs found
Efficient energy use and storage practices within residential facilities for compliance with the nZEB criteria
Solar energy, today, is the leader in renewable energy and the world's increasing new energy source. In 2016, for the first time, newly installed photovoltaic capacity has increased by more than 50%, exceeding the new coal-fired power stations capacity established worldwide. At the beginning of the year, the European Parliament agreed the target that 35% renewable sources by 2030. Studies show that by 2050 approximately 45% of all the households in the EU could produce their own renewable energy and more than a third of them could be part of a renewable energy cooperative, despite the worries of the distribution companies. Furthermore, the EPBD directive (EU) - Energy Performance of Buildings pushes towards new and more performing buildings - nearly zero energy buildings (nZEB) - where energy efficiency and energy flexibility are essential to achieve the required performance targets. Nearly zero-energy buildings (NZEBs) have very high energy performance and could be achieved through the integration of renewable and decentralized energy sources, continuous grid optimization and the inclusion of increasing numbers of consumers becoming producers, so called prosumers. So far, the photovoltaic system is the single technology that can combine data from utility networks with household consumption and therefore should be considered a starting point for streamlining the electricity consumption and production which will be imposed by strict regulations
Increasing the energy conversion efficiency for shrouded hydrokinetic turbines using experimental analysis on a scale model
The objective of the paper is to study the influence of certain shroud types suitable for horizontal axis hydrokinetic turbines using experimental testing in order to increase the energy conversion efficiency. The scale model of the shrouded hydrokinetic turbine is tested on a dedicated experimental bench for axial hydraulic turbine models. Two types of shrouds were tested in order to be compared: convergent shroud and divergent shroud. The rotor and shroud were made using 3D printer technology and were tested at a water velocity of 0.9 m/s on the closed-circuit testing bench. The testing facility allows the determination of the power extracted for each shroud at five distinct positions. Thus, the rotor can be moved within the shroud from inlet to outlet in order to establish the proper operating position. The mechanical power is measured using a torque transducer and an electromagnetic particle brake. The testing results will be analysed based on the variation of power curves obtained for different shroud types and operating positions. The optimum design and the best operating position will be recommended by comparing the testing result with the data collected from the bare turbine using the same rotor placed directly in free flow
Analysis of a low-voltage operating microgrid located in a residential area
The paper aims at providing the analysis of domestic energy generation and consumption within residential areas. The topic of this study is twofold: theoretical and experimental by addressing aspects related to the operation of a microgrid connected to the low-voltage distribution grid. In order to achieve the power quality analysis for various scenarios, an appropriate testing stand was developed by using the Chauvin Arnoux CA 8435 analyser. There is envisaged the modelling and design of a mixed microgrid characterized by two line sections established by three main energy consumption nodes. There have been integrated several connection points related to the distributed generation sources and to the photovoltaic power plants, respectively, and also several supply points for the household end-users. 13 operation scenarios have been developed and recorded by analysing the voltage variation within the microgrid. Furthermore, the paper envisages the stabilization impact of the microgrid voltage variation in the presence of distributed generation sources
Efficient energy use and storage practices within residential facilities for compliance with the nZEB criteria
Solar energy, today, is the leader in renewable energy and the world's increasing new energy source. In 2016, for the first time, newly installed photovoltaic capacity has increased by more than 50%, exceeding the new coal-fired power stations capacity established worldwide. At the beginning of the year, the European Parliament agreed the target that 35% renewable sources by 2030. Studies show that by 2050 approximately 45% of all the households in the EU could produce their own renewable energy and more than a third of them could be part of a renewable energy cooperative, despite the worries of the distribution companies. Furthermore, the EPBD directive (EU) - Energy Performance of Buildings pushes towards new and more performing buildings - nearly zero energy buildings (nZEB) - where energy efficiency and energy flexibility are essential to achieve the required performance targets. Nearly zero-energy buildings (NZEBs) have very high energy performance and could be achieved through the integration of renewable and decentralized energy sources, continuous grid optimization and the inclusion of increasing numbers of consumers becoming producers, so called prosumers. So far, the photovoltaic system is the single technology that can combine data from utility networks with household consumption and therefore should be considered a starting point for streamlining the electricity consumption and production which will be imposed by strict regulations
Increasing the energy conversion efficiency for shrouded hydrokinetic turbines using experimental analysis on a scale model
The objective of the paper is to study the influence of certain shroud types suitable for horizontal axis hydrokinetic turbines using experimental testing in order to increase the energy conversion efficiency. The scale model of the shrouded hydrokinetic turbine is tested on a dedicated experimental bench for axial hydraulic turbine models. Two types of shrouds were tested in order to be compared: convergent shroud and divergent shroud. The rotor and shroud were made using 3D printer technology and were tested at a water velocity of 0.9 m/s on the closed-circuit testing bench. The testing facility allows the determination of the power extracted for each shroud at five distinct positions. Thus, the rotor can be moved within the shroud from inlet to outlet in order to establish the proper operating position. The mechanical power is measured using a torque transducer and an electromagnetic particle brake. The testing results will be analysed based on the variation of power curves obtained for different shroud types and operating positions. The optimum design and the best operating position will be recommended by comparing the testing result with the data collected from the bare turbine using the same rotor placed directly in free flow
Analysis of a low-voltage operating microgrid located in a residential area
The paper aims at providing the analysis of domestic energy generation and consumption within residential areas. The topic of this study is twofold: theoretical and experimental by addressing aspects related to the operation of a microgrid connected to the low-voltage distribution grid. In order to achieve the power quality analysis for various scenarios, an appropriate testing stand was developed by using the Chauvin Arnoux CA 8435 analyser. There is envisaged the modelling and design of a mixed microgrid characterized by two line sections established by three main energy consumption nodes. There have been integrated several connection points related to the distributed generation sources and to the photovoltaic power plants, respectively, and also several supply points for the household end-users. 13 operation scenarios have been developed and recorded by analysing the voltage variation within the microgrid. Furthermore, the paper envisages the stabilization impact of the microgrid voltage variation in the presence of distributed generation sources
New Type of Linear Magnetostrictive Motor Designed for Outer Space Applications, from Concept to End-Product
The use of the linear magnetostrictive motor (LMM) in outer space, in the absence of Earth’s gravitational field and where extreme temperatures manifest, involves innovative technical solutions that result in significant construction changes. This paper highlights these constructive changes and presents the mathematical modeling followed by the numerical simulation of different operating regimes of LMM. The novelty of the design resides in using a bias coil instead, in addition to permanent magnets, to magnetize the magnetostrictive core and pulse width modulated (PWM) power sources to control the two coils of the LMM (bias and activation). The total absorbed current is less than 2 A, which results in the reduction of Joule losses. Moreover, a PWM source is provided to power and control a set of three Peltier elements aimed at cooling the device. The experiments validate the design of the LMM, which elicits it to power and control devices that may modulate fuel injection for rocket engines or for machines used to adjust positioning on circumterrestrial orbits