1,670 research outputs found
Rhythm-Flexible Voice Conversion without Parallel Data Using Cycle-GAN over Phoneme Posteriorgram Sequences
Speaking rate refers to the average number of phonemes within some unit time,
while the rhythmic patterns refer to duration distributions for realizations of
different phonemes within different phonetic structures. Both are key
components of prosody in speech, which is different for different speakers.
Models like cycle-consistent adversarial network (Cycle-GAN) and variational
auto-encoder (VAE) have been successfully applied to voice conversion tasks
without parallel data. However, due to the neural network architectures and
feature vectors chosen for these approaches, the length of the predicted
utterance has to be fixed to that of the input utterance, which limits the
flexibility in mimicking the speaking rates and rhythmic patterns for the
target speaker. On the other hand, sequence-to-sequence learning model was used
to remove the above length constraint, but parallel training data are needed.
In this paper, we propose an approach utilizing sequence-to-sequence model
trained with unsupervised Cycle-GAN to perform the transformation between the
phoneme posteriorgram sequences for different speakers. In this way, the length
constraint mentioned above is removed to offer rhythm-flexible voice conversion
without requiring parallel data. Preliminary evaluation on two datasets showed
very encouraging results.Comment: 8 pages, 6 figures, Submitted to SLT 201
THE INFLUENCE OF DIFFERENT STRIKE PAITERNS ON ENERGY CONTIBUTION DURING RUNNING
Purpose: The purpose of this study was to determine the differences of joint power and work between forefoot strike (FFS) and rear-foot strike (RFS) during the stance phase of running. Methods: A 10-camera Vicon system and two force plates were used to collect the kinematics and kinetics data of 15 healthy male triathletes with different foot strike strategies during running. Results: The joint power and positive work at hip and ankle were increased in FFS during the stance phase. FFS also showed decreased knee negative work. Conclusion: Running with FFS would consume more energy than running with RFS at the same speed. The lack of ankle pint shock absorption in RFS might cause higher injury risk in knee
Recommended from our members
Experimental and Numerical Investigations into Fundamental Mechanisms Controlling Particle Transport in Saturated Porous Media
This dissertation presents the results of a series of experimental and numerical studies designed to advance knowledge of the fundamental mechanisms controlling colloidal particle transport in saturated porous media. That colloidal particles facilitate contaminant transport in porous media, or act as contaminant sources, is well known, and also widely recognized as important to environmental and health issues around the world. Many prior and ongoing studies are aimed at understanding particle transport and deposition behavior in saturated porous media, and these studies have generated a broad range of knowledge regarding particle fate and transport mechanisms. However, the prediction of particle transport behavior still remains challenging, not least because the particle transport processes themselves still include many unknown factors. The goal of the work reported in this dissertation, was to advance understanding of the influence of varying flow velocity conditions, flow direction, particle size and mixed particle populations on particle transport processes. In order to meet this goal, a new numerical model for particle transport was developed, and standard laboratory column test protocols were modified to enable the imposition of varying flow conditions during a test, as well as visualization of particle concentrations within the interior of a column. In addition, and in collaboration with other researchers, numerical modeling work was also undertaken to provide insight into the processes governing particle transport at an instrumented field site.
Numerical models have been used extensively to investigate a wide variety of engineering and applied science problems, including those involving colloidal particle transport in saturated porous media. For the research presented in this dissertation, a new numerical model, termed the Kinetic Colloid Transport Model (KCTM), was developed and implemented using the Matlab platform. The KCTM is based on a one-dimensional (1-D) advection-dispersion-sorption equation coupled with different kinetic sub-models for simulating particle interactions with the solid phase of a porous medium, including irreversible and reversible attachment mechanisms, as well as two-attachment site and two-particle population behaviors. The KCTM is capable of directly simulating particle transport behavior for a given set of initial and boundary conditions, and also inversely solving for the sub-model kinetic parameters based on particle concentrations observed during column or field experiments. To validate the KCTM, KCTM results were compared with analytical solutions generated by the STANMOD program and numerical solutions generated by HYDRUS-1D. Simulation of particle breakthrough concentrations during a hypothetical column experiment with fourteen different case studies, involving a range of particle dispersion coefficients as well as attachment and detachment rates, was used for the validation. Agreement between the KCTM results and those generated by STANMOD and HYDRUS-1D, as defined by corresponding R squared values (all above 0.999), was considered acceptable across all ten case studies. The KCTM has the advantage of modeling a range of particle transport mechanisms, many of which are not accounted for in current open-source or commercially available codes.
Fluctuating or varying velocity conditions are common under many real-world scenarios involving colloidal particle transport, yet are often neglected in laboratory column experiments designed to investigate particle transport behavior. To understand the influence of varying velocity conditions on particle transport, a series of traditional and modified laboratory column experiments was conducted. For the modified column experiments, a protocol was developed to enable the simulation of both increasing and decreasing velocity conditions during a test, as well as conditions involving an increase followed by a decrease in velocity. Laboratory column experiments were performed to examine the downward transport of 2 micron diameter microspheres through a saturated bed of 100 micron diameter glass beads under both constant and varying velocity conditions. The KCTM was simultaneously fit to observed particle concentration breakthrough curves, as well as measured particle concentrations retained in the column at the end of each constant velocity experiment, to obtain a relationship between a dimensionless irreversible kinetic attachment coefficient Ki* and transport velocity. This relationship was then used to model the results of the varying velocity tests, with limited success. A comparison of the Ki* values obtained from direct fitting of the varying velocity tests using the KCTM, with the Ki* values derived from the results of the constant velocity experiments, revealed a potential dependence of Ki* on the rate of change of transport velocity, which is currently not accounted for in any particle transport model. Overall, the results of this experimental and numerical investigation pointed to the need for better understanding of how varying velocity conditions impact fundamental particle transport mechanisms.
A visualization technique was used to examine the effects of particle size and flow direction on particle transport in a saturated porous medium comprised of 500μm diameter glass beads. Packed column experiments with uniform (100% 1μm or 100% 6μm) and mixed (90% 1μm with 10% 6μm and 90% 6μm with 10% 1μm) polystyrene latex microspheres were performed in one-dimensional upward, horizontal and downward flow fields at a constant velocity of 1.7m/day. Particle concentrations were recorded over time in the interior of a column and at the column exit. Experimental results showed that upward flow conditions generally gave rise to higher retained particle concentrations and lower particle breakthrough concentrations than horizontal and downward flow conditions, indicating that gravitational settling decreases particle transport distances and enhances particle deposition mechanisms. Consistent with prior studies, results also showed increasing particle retention with increasing particle size. The 1μm particle tests results were successfully modeled using a first order, irreversible particle attachment model, indicating little filtration of this particle size within the glass bead columns during transport. Modeling of the 6μm particle tests required a two-site kinetic modeling approach that accounted for particle interactions with the surfaces of the glass beads as well as straining of particles at bead-bead contact points. The presence of a second particle population had little impact on the transport of the 1μm particles. For the 6μm particles, the presence of the second particle population increased particle attachment rates, with the greatest impact observed during downward flow conditions. Overall, the results of this study confirm that particle size and flow direction impact particle transport processes. The study also reveals that particle size heterogeneity could also impact particle transport under certain conditions. Both of these findings have implications for field-scale modeling of particle transport.
The up-scaling of results obtained from laboratory column experiments to predict particle transport at the field scale is generally reported to under-estimate particle transport distances observed in the field. The over-simplification of column experimental conditions, in comparison to field conditions, or the use of improper kinetic models are two possible reasons leading to such inaccurate predictions. In order to explore the possible hurdles to current up-scaling methods, the KCTM was used to analyze a series of Escherichia coli based column experiments using aquifer sand obtained from a field site in Bangladesh, which are described in the collaborative work presented in Appendix A. Four E.coli breakthrough curves (BTCs) and two profiles of spatially retained E.coli concentrations at the end of an experiment were generated by the column test series. The KCTM successfully modeled the BTC results using a two-population kinetic sub-model. Both one-site and two-site particle attachment sub-models failed to reproduce the observed BTCs. None of the kinetic sub-models could reproduce the observed particle retention profiles, although the two-population sub-model generated similar hyper log-linear profiles to those seem in the experiment results. Low mass recovery rates in the column experiments is one possible reason why the KCTM failed to fit the retained profiles. The kinetic parameters obtained from the KCTM fits to the column experimental results were incorporated into a two-dimensional transport model, HYDRUS-2D, to predict E. coli transport observed at an instrumented field in Bangladesh. Predictions obtained using only irreversible attachments kinetics, reversible attachment kinetics and both reversible and irreversible attachment kinetics performed with RMSE values of 1158, 826, and 99, respectively. The dramatic decrease in RMSE with the application of the two-site kinetic model indicates that E. coli transport at the field site likely involves both reversible and irreversible attachment. An important conclusion of this work was the significance of designing laboratory column experiments that can enable the extraction of kinetic parameters relevant to field scale transport processes.
The numerical and experimental studies presented in this dissertation examined some factors that influence particle fate and transport in saturated porous media, which are commonly overlooked in many conceptual and numerical models of particle behavior. The results of these studies point to a need to better understand how varying velocity conditions, flow direction, particle size and mixed particle populations influence particle fate and transport. The results of these studies also prompt out several recommended future works. For the developed numerical model, current kinetic sub-models imperfectly reproduced experiment results, also inadequately described the particle transport in microscale observations, indicating the simplified first-order kinetics are inaccurate for describing actual particle transport behaviors. A non-log-linear kinetic sub-model and corresponding micro-scale experiments are needed for better predictions. Moreover, the effects of particle-particle interaction were proven significant in certain conditions, however, the processes is still unclear. Visualization technique introduced in this research is capable to explore the controlling mechanisms in micro-scale and further provides the foundations for developing non-log-linear kinetic model, quantifying the effects of particle-particle interactions, acceleration, and other uncovered physical/chemical factors on particle transport in porous media. Advancing understanding of these factors has potential for improving the prediction of colloidal particle transport under real-world, field conditions, which can benefit many programs aimed at reducing the environmental and health impacts of colloid facilitated contaminant transport
MECHANISM OF LANDING STRATERGY DURING STEP AEROBICS WITH DIFFERENT BENCH HEIGHTS AND LOADS
The purpose of this study was to investigate effects of different heights (6inch, 8inch, 10inch) and external loads (0% BW, 10% BW, 15% BW) on lower extremity during step aerobics. Ten college physical education students (age: 23.8 ± 2.1 years, height: 173.5 ± 6.1 cm, weight: 68.5 ± 8.0 kg) participated in this study. A Mega high-speed camera (100 Hz) and an ATMI force plate (1000Hz) were used to record kinematic and kinetic data respectively during step aerobics. Increased vertical ground reaction force, ankle movement, and decreased leg stiffness and ankle joint stiffness were found as the bench height increased to 10 inches which were considered to a high loading rates and shock to the lower extremity, especially at ankle joint. Therefore, people should avoid doing step aerobics at 10-inch bench height for a long time to protect ankle joint and soft tissue from injury
THE INFLUENCE OF TAI-CHI EXERCISE ON DYNAMICS OF LOWER EXTREMITY FOR THE ELDERLY DURING SIT-TO-STAND
The purpose of this study was to investigate the influence of Tai Chi exercise on sit-tostand in the elderly. Ten healthy female elders (normal group) and nine healthy Tai-Chi female practitioner (Tai-Chi group) participated in this study. The results indicated: (1) During the forward flexion phase, normal group showed significantly greater hip flexion angle and moment than Tai-Chi group (
On the Efficiency of An Election Game of Two or More Parties: How Bad Can It Be?
We extend our previous work on two-party election competition [Lin, Lu & Chen
2021] to the setting of three or more parties. An election campaign among two
or more parties is viewed as a game of two or more players. Each of them has
its own candidates as the pure strategies to play. People, as voters, comprise
supporters for each party, and a candidate brings utility for the the
supporters of each party. Each player nominates exactly one of its candidates
to compete against the other party's. A candidate is assumed to win the
election with higher odds if it brings more utility for all the people. The
payoff of each player is the expected utility its supporters get. The game is
egoistic if every candidate benefits her party's supporters more than any
candidate from the competing party does. In this work, we first argue that the
election game always has a pure Nash equilibrium when the winner is chosen by
the hardmax function, while there exist game instances in the three-party
election game such that no pure Nash equilibrium exists even the game is
egoistic. Next, we propose two sufficient conditions for the egoistic election
game to have a pure Nash equilibrium. Based on these conditions, we propose a
fixed-parameter tractable algorithm to compute a pure Nash equilibrium of the
egoistic election game. Finally, perhaps surprisingly, we show that the price
of anarchy of the egoistic election game is upper bounded by the number of
parties. Our findings suggest that the election becomes unpredictable when more
than two parties are involved and, moreover, the social welfare deteriorates
with the number of participating parties in terms of possibly increasing price
of anarchy. This work alternatively explains why the two-party system is
prevalent in democratic countries
Novel CMOS RFIC Layout Generation with Concurrent Device Placement and Fixed-Length Microstrip Routing
With advancing process technologies and booming IoT markets, millimeter-wave
CMOS RFICs have been widely developed in re- cent years. Since the performance
of CMOS RFICs is very sensi- tive to the precision of the layout, precise
placement of devices and precisely matched microstrip lengths to given values
have been a labor-intensive and time-consuming task, and thus become a major
bottleneck for time to market. This paper introduces a progressive
integer-linear-programming-based method to gener- ate high-quality RFIC layouts
satisfying very stringent routing requirements of microstrip lines, including
spacing/non-crossing rules, precise length, and bend number minimization,
within a given layout area. The resulting RFIC layouts excel in both per-
formance and area with much fewer bends compared with the simulation-tuning
based manual layout, while the layout gener- ation time is significantly
reduced from weeks to half an hour.Comment: ACM/IEEE Design Automation Conference (DAC), 201
- …