HT-FED2004-56433 EFFECTS OF AMBIENT TEMPERATURE AND OXYGEN CONCENTRATION ON SOOT EVOLUTION IN DIESEL SPRAY COMBUSTION

ABSTRACT A newly developed Forward Illumination Light Extinction (FILE) soot measurement technique was applied in a constant volume spray chamber to study the effects of ambient temperature and oxygen concentration on soot evolution in diesel combustion. The FILE technique with the capability of two-dimensional time-resolved quantitative soot measurement provides the much-needed information to investigate the soot formation mechanism. The ambient temperatures of 1200K, 1000K and 800K were tested to study the temperature effects on soot formation. A decrease of ambient temperature results in a longer ignition delay, which promotes a larger premixed combustion zone combining with higher heat release rates. The change of ambient temperature from 1200K to 800K increases the fuel portion burnt in the premixed combustion period. At 800K, combustion is dominated by the premixed combustion and much less soot is formed. Diesel combustion with 21% and 15% ambient oxygen concentration was also studied. With lower ambient oxygen concentration, the combustion process is basically not changed, but expands into a longer time span with a lower heat release rate. The lower heat release rate results in a lower flame temperature, which benefits the NOx emission control. However, with about the same amount of soot within the flame, and much longer soot life, soot has more chance to escape to the exhaust

Investigation of Bio-Diesel Fueled Engines under Low-Temperature Combustion Strategies

In accordance with meeting DOE technical targets this research was aimed at developing and optimizing new fuel injection technologies and strategies for the combustion of clean burning renewable fuels in diesel engines. In addition a simultaneous minimum 20% improvement in fuel economy was targeted with the aid of this novel advanced combustion system. Biodiesel and other renewable fuels have unique properties that can be leveraged to reduce emissions and increase engine efficiency. This research is an investigation into the combustion characteristics of biodiesel and its impacts on the performance of a Low Temperature Combustion (LTC) engine, which is a novel engine configuration that incorporates technologies and strategies for simultaneously reducing NOx and particulate emissions while increasing engine efficiency. Generating fundamental knowledge about the properties of biodiesel and blends with petroleum-derived diesel and their impact on in-cylinder fuel atomization and combustion processes was an important initial step to being able to optimize fuel injection strategies as well as introduce new technologies. With the benefit of this knowledge experiments were performed on both optical and metal LTC engines in which combustion and emissions could be observed and measured under realistic conditions. With the aid these experiments and detailed combustion models strategies were identified and applied in order to improve fuel economy and simultaneously reduce emissions

Performance and Regulated/Unregulated Emission Evaluation of a Spark Ignition Engine Fueled with Acetone–Butanol–Ethanol and Gasoline Blends

An experimental investigation was conducted on the effect of equivalence ratios and engine loads on performance and emission characteristics using acetone–butanol–ethanol (ABE) and gasoline blends. Gasoline blends with various ABE content (0 vol % to 80 vol % ABE, referred to as G100, ABE10, ABE20, ABE30, ABE60, and ABE80, respectively) were used as test fuels, where the volumetric concentration of A/B/E was 3:6:1. The experiments were conducted at engine loads of 3, 4, 5, and 6 bar brake mean effective pressure at an engine speed of 1200 rpm and under various equivalence ratios (φ = 0.83–1.25). The results showed that ABE addition in the fuel blends could increase brake thermal efficiency and decrease unburned hydrocarbon (UHC), carbon dioxide (CO), and oxynitride (NOx). As for unregulated emissions, acetaldehyde and 1,3-budatiene emissions increased with the increased ABE content in blend fuels. Regarding the aromatic emissions, ABE addition led to a decrease in benzene, toluene, and xylene emissions. The study indicated that ABE could be used as a promising alternative fuel in spark ignition (SI) engines for enhancing the brake thermal efficiency and reducing regulated emissions and aromatic air toxics