18 research outputs found
Impact of Tetrapeptide-FSEY on Oxidative and Physical Stability of Hazelnut Oil-In-Water Emulsion
This study investigates the antioxidant behaviors of a hazelnut tetrapeptide, FSEY (Phe-Ser-Glu-Tyr), in an oil-in-water emulsion. The emulsion was prepared with stripped hazelnut oil at a ratio of 10%. O/W emulsions, both with and without antioxidants (FSEY and TBHQ), were incubated at 37 °C. The chemical stabilities, including those of free radicals and primary and secondary oxidation productions, along with the physical stabilities, which include particle size, zeta-potential, color, pH, and ΔBS, were analyzed. Consequently, FSEY displayed excellent antioxidant behaviors in the test system by scavenging free lipid radicals. Both primary and secondary oxidation products were significantly lower in the FSEY groups. Furthermore, FSEY assisted in stabilizing the physical structure of the emulsion. This antioxidant could inhibit the increase in particle size, prevent the formation of creaming, and stabilize the original color and pH of the emulsion. Consequently, FSEY may be an effective antioxidant additive to use in emulsion systems
A Novel Insight into Screening for Antioxidant Peptides from Hazelnut Protein: Based on the Properties of Amino Acid Residues
This study used the properties of amino acid residues to screen antioxidant peptides from hazelnut protein. It was confirmed that the type and position of amino acid residues, grand average of hydropathy, and molecular weight of a peptide could be comprehensively applied to obtain desirable antioxidants after analyzing the information of synthesized dipeptides and BIOPEP database. As a result, six peptides, FSEY, QIESW, SEGFEW, IDLGTTY, GEGFFEM, and NLNQCQRYM were identified from hazelnut protein hydrolysates with higher antioxidant capacity than reduced Glutathione (GSH) against linoleic acid oxidation. The peptides having Tyr residue at C-terminal were found to prohibit the oxidation of linoleic acid better than others. Among them, peptide FSEY inhibited the rancidity of hazelnut oil very well in an oil-in-water emulsion. Additionally, quantum chemical parameters proved Tyr-residue to act as the active site of FSEY are responsible for its antioxidation. This is the first presentation of a novel approach to excavating desired antioxidant peptides against lipid oxidation from hazelnut protein via the properties of amino acid residues
The α-mating factor secretion signals and endogenous signal peptides for recombinant protein secretion in Komagataella phaffii
Abstract Background The budding yeast Komagataella phaffii (Pichia pastoris) is widely employed to secrete proteins of academic and industrial interest. For secretory proteins, signal peptides are the sorting signal to direct proteins from cytosol to extracellular matrix, and their secretion efficiency directly impacts the yields of the targeted proteins in fermentation broth. Although the α-mating factor (MF) secretion signal from S. cerevisiae, the most common and widely used signal sequence for protein secretion, works in most cases, limitation exists as some proteins cannot be secreted efficiently. As the optimal choice of secretion signals is often protein specific, more secretion signals need to be developed to augment protein expression levels in K. phaffii. Results In this study, the secretion efficiency of 40 α-MF secretion signals from various yeast species and 32 endogenous signal peptides from K. phaffii were investigated using enhanced green fluorescent protein (EGFP) as the model protein. All of the evaluated α-MF secretion signals successfully directed EGFP secretion except for the secretion signals of the yeast D. hansenii CBS767 and H. opuntiae. The secretion efficiency of α-MF secretion signal from Wickerhamomyces ciferrii was higher than that from S. cerevisiae. 24 out of 32 endogenous signal peptides successfully mediated EGFP secretion. The signal peptides of chr3_1145 and FragB_0048 had similar efficiency to S. cerevisiae α-MF secretion signal for EGFP secretion and expression. Conclusions The screened α-MF secretion signals and endogenous signal peptides in this study confer an abundance of signal peptide selection for efficient secretion and expression of heterologous proteins in K. phaffii
Erratum: The inactivation mechanism of chemical disinfection against SARS-CoV-2: The MD and DFT perspectives(RSC Advances (2020) 10 (40480–40488) DOI: 10.1039/D0RA06730J)
The authors regret that one of the affiliations (affiliation f) was incorrectly omitted in the original manuscript. The corrected list of affiliations is as shown below. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.</p
Fabrication and Characterization of Gel Beads of Whey Isolate Protein–Pectin Complex for Loading Quercetin and Their Digestion Release
In this study, emulsion gel beads for loading quercetin were prepared through an emulsification/gelation process using whey protein isolate (WPI) and pectin. Emulsion gel beads’ properties were investigated by different pectin content. Additionally, the physicochemical properties, morphology and quercetin release properties from beads were explored. Firstly, electrical characteristics and the rheology of bead-forming solutions were measured, revealing that all systems had strong negative charge and exhibited shear-thinning behavior. The textural results demonstrated that the properties of emulsion gel beads were improved with increasing the content of pectin. It was also confirmed that crosslinking was formed between WPI emulsion and pectin by Fourier Transform Infrared (FTIR) analysis and thermogravimetric analysis (TGA). In addition, the shape of the beads was spherical or ellipses with smooth surfaces and they had a tight gel network of internal structures, which was visualized by using electron microscopy (SEM). Finally, the amount of quercetin released in vitro was gradually decreased with increasing pectin content; it was as low as 0.59%. These results revealed that WPI emulsion–pectin gel beads might be an effective delivery system for quercetin as a colon target and are worth exploring further
The inactivation mechanism of chemical disinfection against SARS-CoV-2: From MD and DFT perspectives
Exploring effective disinfection methods and understanding their mechanisms on the new coronavirus is becoming more active due to the outbreak of novel coronavirus pneumonia (COVID-19) caused by severe acute respiratory coronavirus 2 (SARS-CoV-2). By combining molecular dynamics and first-principles calculations, we investigate the interaction mechanism of chemical agents with 3CL hydrolase of SARS-CoV-2. The radial distribution functions indicate that the biocidal ingredients are sensitive to the unsaturated oxygen atoms of 3CL hydrolase and their interactions remarkably depend on the concentration of the biocidal ingredients. Besides, we find that the adsorption performance of the active ingredients for the unsaturated oxygen atoms is superior to other styles of atoms. These computational results not only decipher the inactivation mechanism of chemical agents against SARS-CoV-2 from the molecule-level perspective, but also provide a theoretical basis for the development and application of new chemical methods with a high disinfection efficiency. Electronic Components, Technology and Material
Coalescence kinetics and microstructure evolution of Cu nanoparticles sintering on substrates: a molecular dynamics study
Nano copper sintering technology has great potential to be widely applied in the wide-bandgap semiconductor packaging. In order to investigate the coalescence kinetics of copper nano particles for this application, a molecular dynamic (MD) simulation was carried out at low temperature on a special model containing two substrate and multiple particles in between. Accordingly, thorough microstructure and dislocation investigation was conducted to identify the atomic-scale evolution in the system. The corresponding findings could provide evidence on the new particle-substrate sintering mechanism. Furthermore, atomic trajectories tracking method was applied to study the rotation behavior of different sized nano particles. New rotation behavior and mechanism were described. Additionally, the study on the size effect of copper particles on the sintering process and coalescence mechanism was conducted via comparing the microstructural and dislocation distribution of 3 nm, 4 nm and 5 nm models. Finally, by comparing the MSD results at low and high temperature for each model, the dominant coalescence dynamics changes were obtained.Electronic Components, Technology and Material
Erratum: The inactivation mechanism of chemical disinfection against SARS-CoV-2: The MD and DFT perspectives(RSC Advances (2020) 10 (40480–40488) DOI: 10.1039/D0RA06730J)
The authors regret that one of the affiliations (affiliation f) was incorrectly omitted in the original manuscript. The corrected list of affiliations is as shown below. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.Electronic Components, Technology and Material
Stretchable strain sensor based on HfSe<sub>2</sub>/LIG composite with high sensitivity and good linearity within a wide range
Flexible strain sensors based on nanomaterials have sparked a lot of interest in the field of wearable smart electronics. Laser induced graphene (LIG) based sensors in particular stand out due to their straightforward fabrication procedure, three-dimensional porous structures, and exceptional electromechanical capabilities. Recent studies have focused on LIG composites, however, it is still difficult to achieve great sensitivity and excellent linearity in a wide linear working range. Herein, a strain sensor with high sensitivity and good linearity is prepared in this work, which was realized by carbonizing the polyimide film coated with HfSe2 to obtain three-dimensional porous graphene nanosheets decorated with HfSe2 (HfSe2/LIG). After being transferred to the flexible substrate of Ecoflex, it exhibits high stretchability, hydrophobicity and robustness, and obtains excellent electromechanical properties. The HfSe2/LIG strain sensor demonstrated high sensitivity (gauge factor, GF ≈ 46), a low detection limit (0.02%), good linearity (R2 = 0.99) in a large working range (up to 30%), and a quick response time (0.20 s). Additionally, it exhibits good stability and consistent behavior across a large number of strain/release test cycles (>3000 cycles). With these benefits, the sensor can be used to monitor various limb movements (including finger, wrist and neck movements) and minute artery activity, and can generate reliable signals. Therefore, the HfSe2/LIG-based sensor has enormous potential for use in wearable intelligent electronics and movement monitoring.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Bio-ElectronicsElectronic Components, Technology and Material
Effects of shell thickness on the thermal stability of Cu-Ag core-shell nanoparticles: A molecular dynamics study
Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular dynamics simulation was applied to study the thickness effect on the thermal behavior of Cu-Ag CSNPs. The melting points of CSNPs and Pure NPs can be determined by the evolutions of Potential Energy (PE), and the Lindemann index (LI) of the system. The results indicated that the melting points of CS NPs were lower than monometallic NP and the melting point of CS NP is influenced by the size of the Cu core and the number of lattice mismatches. Moreover, the distribution of atoms’ LI showed that the premelting point is independent of shell thickness. However, the fraction of atoms that occurred premelting is increased with the decrease of the shell thickness. Otherwise, we also simulated the sintering process of double CS NPs with equal size.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic Components, Technology and Material