6.4 GHz Acoustic Sensor for In-situ Monitoring of AFM Tip Wear

This paper demonstrates an acoustic sensor that can resolve atomic force microscopy (AFM) tip blunting with a frequency sensitivity of 0.007%. The AFM tip is fabricated on a thin film piezoelectric aluminum nitride (AlN) membrane that is excited as a film bulk acoustic resonator (FBAR). We demonstrate that cutting 0.98 μm off of the tip apex results in a resonance frequency change of 0.4MHz at 6.387GHz. This work demonstrates the potential for in-situ monitoring of AFM tip wear

Nano-electromechanical Zero-dimensional Freestanding Nanogap Actuator

Micromachined free standing nanogap with metal electrodes is presented. The gap size is as small as 17 nm, and can be reduced further with electrostatic or piezoelectric actuation. The nanoscale gap is fabricated by industrial standard optical lithography and anisotropic wet chemical Si etching. Electron transport between the metal electrodes with optical stimulus enhancing photon-electron coupling (plasmon) is presented

Hierarchical Gaussian process mixtures for regression

As a result of their good performance in practice and their desirable analytical properties, Gaussian process regression models are becoming increasingly of interest in statistics, engineering and other fields. However, two major problems arise when the model is applied to a large data-set with repeated measurements. One stems from the systematic heterogeneity among the different replications, and the other is the requirement to invert a covariance matrix which is involved in the implementation of the model. The dimension of this matrix equals the sample size of the training data-set. In this paper, a Gaussian process mixture model for regression is proposed for dealing with the above two problems, and a hybrid Markov chain Monte Carlo (MCMC) algorithm is used for its implementation. Application to a real data-set is reported

Vector and Scalar Meson Resonances in K→πππK\rightarrow\pi\pi\pi Decays

Corrections to $K\rightarrow\pi\pi\pi$ induced by vector and scalar meson exchange are investigated within chiral perturbation theory.Comment: 15pages, Latex-file, TUM-T31-41/9

Relativistic Mass Ejecta from Phase-transition-induced Collapse of Neutron Stars

We study the dynamical evolution of a phase-transition-induced collapse neutron star to a hybrid star, which consists of a mixture of hadronic matter and strange quark matter. The collapse is triggered by a sudden change of equation of state, which result in a large amplitude stellar oscillation. The evolution of the system is simulated by using a 3D Newtonian hydrodynamic code with a high resolution shock capture scheme. We find that both the temperature and the density at the neutrinosphere are oscillating with acoustic frequency. However, they are nearly 180$^{\circ}$ out of phase. Consequently, extremely intense, pulsating neutrino/antineutrino fluxes will be emitted periodically. Since the energy and density of neutrinos at the peaks of the pulsating fluxes are much higher than the non-oscillating case, the electron/positron pair creation rate can be enhanced dramatically. Some mass layers on the stellar surface can be ejected by absorbing energy of neutrinos and pairs. These mass ejecta can be further accelerated to relativistic speeds by absorbing electron/positron pairs, created by the neutrino and antineutrino annihilation outside the stellar surface. The possible connection between this process and the cosmological Gamma-ray Bursts is discussed.Comment: 40 pages, 11 figures, accepted for publication in JCA

Rms-flux relation of Cyg X-1 with RXTE: dipping and nondipping cases

The rms (root mean square) variability is the parameter for understanding the emission temporal properties of X-ray binaries (XRBs) and active galactic nuclei (AGN). The rms-flux relation with Rossi X-ray Timing Explorer (RXTE) data for the dips and nondip of black hole Cyg X-1 has been investigated in this paper. Our results show that there exist the linear rms-flux relations in the frequency range 0.1-10 Hz for the dipping light curve. Moreover, this linear relation still remains during the nondip regime, but with the steeper slope than that of the dipping case in the low energy band. For the high energy band, the slopes of the dipping and nondipping cases are hardly constant within errors. The explanations of the results have been made by means of the ``Propagating Perturbation'' model of Lyubarskii (1997).Comment: 15 pages, 12 figures, Accepted for publication in Astrophysics & Space Scienc

Determination of trace elements in natural water samples by air-segmented flow-injection/ICP-MS after preconcentration with a chitosan-based chelating resin

本法では,各種天然水中の極微量金属成分を同時定量する目的で空気分節試料導入/ICP-MSシステムを用いて,微少量試料(数十μl)を前処理せずにネブライザーに送り込み,多数の金属成分の定量が可能であった。共存主成分による質量干渉を受ける一部遷移金属や直接試料導入では感度の足りない元素については,イミノ二酢酸型キトサンキレート樹脂充填カラムによる分離·濃縮操作の併用によって更に信頼性の高いデータが得られることが分かった。前処理においては,体積1mlのミニカラムを用いて50mlの溶液試料から50倍濃縮を行い,試料·試薬·廃液すべてを少量化することができた。本ICP-MSシステムでは試料導入量は80μlで十分であり,1mlでも数回繰り返し測定が可能で,しかも多元素同時分析ができた。確立した分析法を用いて河川水や市販のミネラルウォーターに応用し,希土類を含め45種の微量元素の定量が可能となった。Ultratrace elements in natural water samples were determined simultaneously by air-segmented flow-injection/inductively coupled plasma-mass spectrometry(SFI/ICP-MS).A small volume of the sample solutions(80μl) was introduced into a nebulizer by an air-segmented flow-injection(SFI) system, and a maximum of fifteen elements were measured during each run.A chitosan-based chelating resin containing functional groups of iminodiacetate was used to separate and enrich analyte metal ions.A 50-fold preconcentration using 50ml of sample solutions was achieved by the proposed method, where 1ml of 0.1M nitric acid was added to residues after drying the chelating column effluent.At pH6, several heavy metals(Fe, Ni, Co, Cu, Zn, Ag, Cd, Pb and U) and rare earth elements(REEs) were quantitatively retained on the chelating resin column, whereas alkali and alkaline earth metals were eluted from the column by rinsing with 5ml of a 0.2M ammonium acetate solution.Metals adsorbed on the chelating resin column were recovered by elution with 10ml of 1M nitric acid.The proposed method was applied to the determination of trace elements in several natural water samples, such as river water and mineral drinking water

Entanglement Transfer via XXZ Heisenberg chain with DM Interaction

The role of spin-orbit interaction, arises from the Dzyaloshinski-Moriya anisotropic antisymmetric interaction, on the entanglement transfer via an antiferromagnetic XXZ Heisenberg chain is investigated. From symmetrical point of view, the XXZ Hamiltonian with Dzyaloshinski-Moriya interaction can be replaced by a modified XXZ Hamiltonian which is defined by a new exchange coupling constant and rotated Pauli operators. The modified coupling constant and the angle of rotations are depend on the strength of Dzyaloshinski-Moriya interaction. In this paper we study the dynamical behavior of the entanglement propagation through a system which is consist of a pair of maximally entangled spins coupled to one end of the chain. The calculations are performed for the ground state and the thermal state of the chain, separately. In both cases the presence of this anisotropic interaction make our channel more efficient, such that the speed of transmission and the amount of the entanglement are improved as this interaction is switched on. We show that for large values of the strength of this interaction a large family of XXZ chains becomes efficient quantum channels, for whole values of an isotropy parameter in the region $-2 \leq \Delta \leq 2$.Comment: 21 pages, 9 figure

The transition form factors for semi-leptonic weak decays of J/ψJ/\psi in QCD sum rules

Within the Standard Model, we investigate the semi-leptonic weak decays of $J/\psi$. The various form factors of $J/\psi$ transiting to a single charmed meson ($D^{(*)}_{(d,s)}$) are studied in the framework of the QCD sum rules. These form factors fully determine the rates of the weak semi-leptonic decays of $J/\psi$ and provide valuable information about the non-perturbative QCD effects. Our results indicate that the decay rate of the semi-leptonic weak decay mode $J/\psi \to D^{(*)-}_{s}+e^{+}+\nu_{e}$ is at order of $10^{-10}$.Comment: 28 pages, 6 figures, revised version to be published in Eur.Phys.J.