1,909 research outputs found
Characterization of microbulk detectors in argon- and neon-based mixtures
A recent Micromegas manufacturing technique, so called Microbulk, has been
developed, improving the uniformity and stability of this kind of detectors.
Excellent energy resolutions have been obtained, reaching values as low as 11%
FWHM at 5.9 keV in Ar+5%iC4H10. This detector has other advantages like its
flexible structure, low material budget and high radio-purity. Two microbulk
detectors with gaps of 50 and 25 um have been characterized in argon- and
neon-based mixtures with ethane, isobutane and cyclohexane. The results will be
presented and discussed. The gain curves have been fitted to the Rose-Korff
gain model and dependences of the electron mean free path and the threshold
energy for ionization have been obtained. The possible relation between these
two parameters and the energy resolution will be also discussed.Comment: Submitted to the Journal of Instrumentatio
Observation of Quantum Effects in sub Kelvin Cold Reactions
There has been a long-standing quest to observe chemical reactions at low
temperatures where reaction rates and pathways are governed by quantum
mechanical effects. So far this field of Quantum Chemistry has been dominated
by theory. The difficulty has been to realize in the laboratory low enough
collisional velocities between neutral reactants, so that the quantum wave
nature could be observed. We report here the first realization of merged
neutral supersonic beams, and the observation of clear quantum effects in the
resulting reactions. We observe orbiting resonances in the Penning ionization
reaction of argon and molecular hydrogen with metastable helium leading to a
sharp increase in the absolute reaction rate in the energy range corresponding
to a few degrees kelvin down to 10 mK. Our method is widely applicable to many
canonical chemical reactions, and will enable a breakthrough in the
experimental study of Quantum Chemistry
MICROMEGAS chambers for hadronic calorimetry at a future linear collider
Prototypes of MICROMEGAS chambers, using bulk technology and analog readout,
with 1x1cm2 readout segmentation have been built and tested. Measurements in
Ar/iC4H10 (95/5) and Ar/CO2 (80/20) are reported. The dependency of the
prototypes gas gain versus pressure, gas temperature and amplification gap
thickness variations has been measured with an 55Fe source and a method for
temperature and pressure correction of data is presented. A stack of four
chambers has been tested in 200GeV/c and 7GeV/c muon and pion beams
respectively. Measurements of response uniformity, detection efficiency and hit
multiplicity are reported. A bulk MICROMEGAS prototype with embedded digital
readout electronics has been assembled and tested. The chamber layout and first
results are presented
THGEM-based detectors for sampling elements in DHCAL: laboratory and beam evaluation
We report on the results of an extensive R&D program aimed at the evaluation
of Thick-Gas Electron Multipliers (THGEM) as potential active elements for
Digital Hadron Calorimetry (DHCAL). Results are presented on efficiency, pad
multiplicity and discharge probability of a 10x10 cm2 prototype detector with 1
cm2 readout pads. The detector is comprised of single- or double-THGEM
multipliers coupled to the pad electrode either directly or via a resistive
anode. Investigations employing standard discrete electronics and the KPiX
readout system have been carried out both under laboratory conditions and with
muons and pions at the CERN RD51 test beam. For detectors having a
charge-induction gap, it has been shown that even a ~6 mm thick single-THGEM
detector reached detection efficiencies above 95%, with pad-hit multiplicity of
1.1-1.2 per event; discharge probabilities were of the order of 1e-6 - 1e-5
sparks/trigger, depending on the detector structure and gain. Preliminary beam
tests with a WELL hole-structure, closed by a resistive anode, yielded
discharge probabilities of <2e-6 for an efficiency of ~95%. Methods are
presented to reduce charge-spread and pad multiplicity with resistive anodes.
The new method showed good prospects for further evaluation of very thin
THGEM-based detectors as potential active elements for DHCAL, with competitive
performances, simplicity and robustness. Further developments are in course.Comment: 15 pages, 11 figures, MPGD2011 conference proceedin
Large Area Micromegas Chambers with Embedded Front-end Electronics for Hadron Calorimetry
AbstractMicromegas (Micro-mesh gaseous structure) is an attractive technology for applications in particle physics experiments (TPC, calorimeters, muon systems, etc.). The most important results of an extensive R&D program aiming to develop a new generation of a fine-grained hadron calorimeter with low power consumption digital readout using Micromegas chambers as an active element are presented. In 2010, the first large scale prototype of Micromegas chamber with almost 8000 readout channels has been built and tested with high energy particle beams at CERN. The fundamental results, such as detection effciency, hit multiplicity, gain stability, response uniformity and effect of power pulsing of the detector front-end electronics are reported. Eventually, the development and test of the second generation of the large scale prototype with new readout electronics and some important improvements of its mechanical design is described and the prospective towards the construction of a technological prototype of a 4.5 λ deep digital calorimeter for a future linear collider is also given
Recent results of Micromegas sDHCAL with a new readout chip
Calorimetry at future linear colliders could be based on a particle flow
approach where granularity is the key to high jet energy resolution. Among
different technologies, Micromegas chambers with 1 cm2 pad segmentation are
studied for the active medium of a hadronic calorimeter. A chamber of 1 m2 with
9216 channels read out by a low noise front-end ASIC called MICROROC has
recently been constructed and tested. Chamber design, ASIC circuitry and
preliminary test beam results are reported
Construction and test of a 1×1 m2 Micromegas chamber for sampling hadron calorimetry at future lepton colliders
Equipe MicromegasSampling calorimeters can be finely segmented and used to detect showers with high spatial resolution. This imaging power can be exploited at future linear collider experiments where the measurement of jet energy by a Particle flow method requires optimal use of tracking and calorimeter information. Gaseous detectors can achieve high granularity and a hadron sampling calorimeter using Micromegas chambers as active elements is considered in this paper. Compared to traditional detectors using wires or resistive plates, Micromegas is free of space charge effects and could therefore show superior calorimetric performance. To test this concept, a prototype of 1×1 m2 equipped with 9216 readout pads of 1×1 cm2 has been built. Its technical and basic operational characteristics are reported
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
We present a study of showers initiated by electrons, pions, kaons, and
protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE
scintillator-tungsten analogue hadronic calorimeter. The data were recorded at
the CERN Super Proton Synchrotron in 2011. The analysis includes measurements
of the calorimeter response to each particle type as well as measurements of
the energy resolution and studies of the longitudinal and radial shower
development for selected particles. The results are compared to Geant4
simulations (version 9.6.p02). In the study of the energy resolution we include
previously published data with beam momenta from 1 GeV to 10 GeV recorded at
the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table
Micromegas for imaging hadronic calorimetry
The recent progress in R&D of the Micromegas detectors for hadronic
calorimetry including new engineering-technical solutions, electronics
development, and accompanying simulation studies with emphasis on the
comparison of the physics performance of the analog and digital readout is
described. The developed prototypes are with 2 bit digital readout to exploit
the Micromegas proportional mode and thus improve the calorimeter linearity. In
addition, measurements of detection efficiency, hit multiplicity, and energy
shower profiles obtained during the exposure of small size prototypes to
radioactive source quanta, cosmic particles and accelerator beams are reported.
Eventually, the status of a large scale chamber (1{\times}1 m2) are also
presented with prospective towards the construction of a 1 m3 digital
calorimeter consisting of 40 such chambers.Comment: 6 pages, 9 figures, CALOR2010 conferenc
- …