Characterization of gsp-Mediated Growth Hormone Excess in the Context of McCune-Albright Syndrome

McCune-Albright syndrome (MAS) is a disorder characterized by the triad of café-au-lait skin pigmentation, polyostotic fibrous dysplasia of bone, and hyperfunctioning endocrinopathies, including GH excess. The molecular etiology of the disease is postzygotic activating mutations of the GNAS1 gene product, Gsα. The term gsp oncogene has been assigned to these mutations due to their association with certain neoplasms. The aim of this study was to estimate the prevalence of GH excess in MAS, characterize the clinical and endocrine manifestations, and describe the response to treatment. Fifty-eight patients with MAS were screened, and 22 with stigmata of acromegaly and/or elevated GH or IGF-I underwent oral glucose tolerance testing. Twelve patients (21%) had GH excess, based on failure to suppress serum GH on oral glucose tolerance test, and underwent a TRH test, serial GH sampling from 2000-0800 h, and magnetic resonance imaging of the sella. We found that vision and hearing deficits were more common in patients with GH excess (4 of 12, 33%) than those without (2 of 56, 4%). Of interest, patients with a history of precocious puberty and GH excess who had reached skeletal maturity achieved normal adult height despite a history of early epiphyseal fusion. All 9 patients tested had an increase in serum GH after TRH, 11 of 12 (92%) had hyperprolactinemia, and all 8 tested had detectable or elevated nighttime GH levels. Pituitary adenoma was detected in 4 of 12 (33%) patients. All patients with elevated IGF-I levels were treated with cabergoline (7 patients), long-acting octreotide (LAO; 8 patients), or a combination of cabergoline and LAO (4 patients). In six of the seven patients (86%) treated with cabergoline, serum IGF-I decreased, but not to the normal range. In the eight patients treated with LAO alone, IGF-I decreased, and, in four, returned to the normal range. The remaining 4 patients were treated with a combination of cabergoline and LAO. For them, symptoms of GH excess diminished, and IGF-I decreased further, but did not enter the normal range. GH excess is common in MAS and results in a distinct clinical phenotype characterized by inappropriately normal stature, TRH responsiveness, prolactin cosecretion, small or absent pituitary tumors, a consistent but inadequate response to treatment with cabergoline, and an intermediate response to LAO

Enhanced photocatalytic degradation of methylene blue: Preparation of TiO2/reduced graphene oxide nanocomposites by direct sol-gel and hydrothermal methods

In this study, two different preparation methods of titanium dioxide nanoparticles/reduced graphene oxide nanocomposites were investigated using direct sol-gel method followed by hydrothermal treatment or simple hydrothermal route. A different amount of graphene (1- 20%) was mixed with TiO2 for both series of samples in order to improve the photocatalytic activity. The influence of the preparation method on the physico-chemical properties was established by different characterization methods and the photocatalytic degradation of methylene blue (MB) under UV light irradiation was used as test reaction. The highest photocatalytic activity was observed for the nanocomposites containing 10 wt% of graphene. The elimination of MB can reach 93% and 82% for the nanocomposites with 10 wt% graphene prepared by the sol-gel and hydrothermal methods, respectively. These photocatalysts are promising for practical application in nanotechnology.Postprint (author's final draft

The Enhanced Adsorption Capacity of <em>Ziziphus jujuba</em> Stones Modified with Ortho-Phosphoric Acid for Organic Dye Removal: A Gaussian Process Regression Approach

\ua9 2024 by the authors. Here, the chemical modification of Ziziphus jujuba stones (ZJS) treated with ortho-phosphoric acid (ZJS-H3PO4) is investigated to enhance its adsorption properties for organic dyes. The physicochemical properties of ZJS-H3PO4 reveal increased porosity (87.29%), slightly higher bulk density (0.034 g mL−1), and enhanced acidity (31.42 m eq g g−1) compared to untreated ZJS. XRF analysis confirms the successful incorporation of orthophosphoric acid during treatment due to a significant increase in phosphorus content. The maximum adsorption capacity of methylene blue on ZJS-H3PO4 is found to be 179.83 mg g−1, demonstrating its efficacy as a potential adsorbent for organic dyes. These findings suggest that modifying ZJS with orthophosphoric acid could be a promising strategy to enhance its adsorption performance in various environmental applications. Furthermore, Gaussian process regression (GPR) is employed to model MB adsorption by ZJS-H3PO4. Optimization of the GPR model involves evaluating different kernel functions and meticulously adjusting parameters to maximize its ability to capture complex relationships in the data. The obtained GPR model demonstrates remarkable performance with high correlation coefficients (R) and low root mean square errors (RMSEs) across all study phases. Model validation is performed through residual analysis, confirming its effectiveness and accuracy in predicting MB adsorption. Finally, a user-friendly interface is developed to facilitate the usage of the GPR model in future applications, representing a significant advancement in environmental process modeling and ecosystem management

Advanced green peel utilization for efficient methylene blue removal: Integrated analysis and predictive modeling

This study explores the adsorption of Methylene Blue (MB) onto Green Peel (GP) material, utilizing advanced analytical techniques and modeling approaches. Fourier-transform infrared spectroscopy (FT-IR) confirms GP\u27s effectiveness as an adsorbent. The study systematically examines the influence of key factors such as adsorbent dose, pH, MB concentration, and temperature on adsorption efficiency. Among the isotherm models analyzed, the monolayer with double energy (M2) model is identified as the most accurate for describing MB adsorption onto GP. Steric parameters provide insights into the adsorption mechanism, revealing temperature-dependent changes. Thermodynamic analysis indicates an exothermic adsorption process, with a decrease in adsorption capacity at elevated temperatures. Density Function Theory (DFT) analysis highlights the potential for electron transfer during adsorption, contributing to a deeper understanding of the process. Molecular Dynamic Simulation (MDS) uncovers stable adsorption configurations and reveals the significance of chemical interactions and Van der Waals forces. Gaussian Process Regression with L\ue9vy Flight Distribution (GPR_LFD) demonstrates exceptional predictive accuracy, closely aligning experimental and predicted MB uptake values. Optimal adsorption conditions (30 minutes contact time, 0.6 g adsorbent dose, 400 mg/L initial MB concentration, pH 6.6, and 10\ub0C) yield an adsorption capacity of 207.90 mg/g. The integration of LFD optimization and GPR prediction through a MATLAB interface further enhances the practical application of these findings. This comprehensive investigation not only advances the understanding of MB adsorption onto GP but also highlights GP\u27s potential as an efficient, reusable adsorbent

Optimising Lead–Air Battery Performance through Innovative Open-Cell Foam Anodes

\ua9 2024 by the authors.In the dynamic realm of sustainable energy storage technologies, the global research landscape presents myriad scientific and economic challenges. The erratic growth of renewable energies alongside the phasing out of conventional power plants poses a significant hurdle in maintaining a stable balance between energy supply and demand. Consequently, energy storage solutions play a pivotal role in mitigating substantial fluctuations in demand. Metal–air batteries, distinguished by their superior energy density and enhanced safety profile compared to other storage devices, emerge as promising solutions. Leveraging the well-established lead–acid battery technology, this study introduces a novel approach utilising open-cell foam manufactured through the Excess Salt Replication process as an anode for lead–air battery cells. This innovation not only conserves lead but also reduces battery weight. By employing a 25% antimonial lead alloy, open-cell foams with diameters ranging from 2 mm to 5 mm were fabricated for the antimonial lead–air battery. Preliminary findings suggest that the effective electrical conductivity of primary battery cells, measured experimentally, surpasses that of cells composed of the same dense, non-porous antimonial lead alloy. This improvement is primarily attributed to their extensive specific surface area, facilitating oxidation–reduction reactions. A correlation between effective electrical conductivity and cell diameter is established, indicating optimal conductivity achieved with a 5 mm cell diameter. These results underscore the feasibility of implementing such an electrical system

Evaluating the Effectiveness of Coagulation–Flocculation Treatment Using Aluminum Sulfate on a Polluted Surface Water Source: A Year-Long Study

\ua9 2024 by the authors.Safeguarding drinking water is a major public health and environmental concern because it is essential to human life but may contain pollutants that can cause illness or harm the environment. Therefore, continuous research is necessary to improve water treatment methods and guarantee its quality. As part of this study, the effectiveness of coagulation–flocculation treatment using aluminum sulfate (Al2(SO4)3) was evaluated on a very polluted site. Samplings were taken almost every day for a month from the polluted site, and the samples were characterized by several physicochemical properties, such as hydrogen potential (pH), electrical conductivity, turbidity, organic matter, ammonium (NH+4), phosphate (PO43−), nitrate (NO3−), nitrite (NO2−), calcium (Ca2+), magnesium (Mg2+), total hardness (TH), chloride (Cl−), bicarbonate (HCO3−), sulfate (SO42−), iron (Fe3+), manganese (Mn2+), aluminum (Al3+), potassium (K+), sodium (Na+), complete alkalimetric titration (TAC), and dry residue (DR). Then, these samples were treated with Al2(SO4)3 using the jar test method, which is a common method to determine the optimal amount of coagulant to add to the water based on its physicochemical characteristics. A mathematical model had been previously created using the support vector machine method to predict the dose of coagulant according to the parameters of temperature, pH, TAC, conductivity, and turbidity. This Al2(SO4)3 treatment step was repeated at the end of each month for a year, and a second characterization of the physicochemical parameters was carried out in order to compare them with those of the raw water. The results showed a very effective elimination of the various pollutions, with a very high rate, thus demonstrating the effectiveness of the Al2(SO4)3. The physicochemical parameters measured after the treatment showed a significant reduction in the majority of the physicochemical parameters. These results demonstrated that the coagulation–flocculation treatment with Al2(SO4)3 was very effective in eliminating the various pollutions present in the raw water. They also stress the importance of continued research in the field of water treatment to improve the quality of drinking water and protect public health and the environment

Experimental validation of a nonparametric probabilistic model of nonhomogeneous uncertainties for dynamical systems

International audienceThe paper deals with an experimental validation of a nonparametric probabilistic model of nonhomogeneous uncertainties for dynamical systems. The theory used, recently introduced, allows model uncertainties and data uncertainties to be simultaneously taken into account. An experiment devoted to this validation was specifically developed. The experimental model is constituted of two simple dural rectangular plates connected together with a complex joint. In the mean mechanical model, the complex joint, which is constituted of two additional plates attached with 40 screw-bolts, is modeled by a homogeneous orthotropic continuous plate with constant thickness, as usual. Consequently, the mean model introduces a region (the joint) which has a high level of uncertainties. The objective of the paper is to present the experiment and the comparisons of the theoretical prediction with the experiments

Efficient preparation of Arabidopsis pollen tubes for ultrastructural analysis using chemical and cryo-fixation

The pollen tube (PT) serves as a model system for investigating plant cell growth and morphogenesis. Ultrastructural studies are indispensable to complement data from physiological and genetic analyses, yet an effective method is lacking for PTs of the model plant Arabidopsis thaliana. Methods: Here, we present reliable approaches for ultrastructural studies of Arabidopsis PTs, as well as an efficient technique for immunogold detection of cell wall epitopes. Using different fixation and embedding strategies, we show the amount of PT ultrastructural details that can be obtained by the different methods. Results: Dozens of cross-sections can be obtained simultaneously by the approach, which facilitates and shortens the time for evaluation. In addition to in vitro-grown PTs, our study follows the route of PTs from germination, growth along the pistil, to the penetration of the dense stylar tissue, which requires considerable mechanical forces. To this end, PTs have different strategies from growing between cells but also between the protoplast and the cell wall and even within each other, where they share a partly common cell wall. The separation of PT cell walls in an outer and an inner layer reported for many plant species is less clear in Arabidopsis PTs, where these cell wall substructures are connected by a distinct transition zone. Conclusions: The major advancement of this method is the effective production of a large number of longitudinal and cross-sections that permits obtaining a detailed and representative picture of pollen tube structures in an unprecedented way. This is particularly important when comparing PTs of wild type and mutants to identify even subtle alterations in cytoarchitecture. Arabidopsis is an excellent plant for genetic manipulation, yet the PTs, several-times smaller compared to tobacco or lily, represent a technical challenge. This study reveals a method to overcome this problem and make Arabidopsis PTs more amenable to a combination of genetic and ultrastructural analyses

Numerical modelling of ground borne vibrations from high speed rail lines on embankments

A three dimensional numerical model is presented capable of modelling the propagation and transmission of ground vibration in the vicinity of high speed railways. It is used to investigate the effect of embankment constituent material on ground borne vibration levels at various distances from the track. The model is a time domain explicit, dynamic finite element model capable of simulating non-linear excitation mechanisms. The entire model, including the wheel/rail interface is fully coupled. To account for the unbounded nature of the soil structure an absorbing boundary condition (infinite element) is placed at the truncated interfaces. To increase boundary absorption performance, the soil structure is modelled using an elongated spherical geometry. The complex geometries associated with the track components are modelled in detail thus allowing a highly realistic simulation of force transmission from vehicle to embankment. Lastly, quasi-static and dynamic excitation mechanisms of the vehicle locomotives are described using a multi-body approach which is fully coupled to the track using non-linear Hertzian contact theory. The resulting model is verified using experimental ground borne vibration data from high speed trains, gathered through field trials. It is then used to investigate the role of embankments in the transmission of vibration. It is found that soft embankments exhibit large deflections and act as a waveguide for railway vibrations which are trapped within the structure. This results in increased vibration levels both inside the embankment and in the surrounding soil. In contrast it is found that embankments formed from stiffer material reduce vibrations in the near and far fields