33 research outputs found
A Hierarchical Approach for Fast Calculating Minimal Cut Sets of a Microgrid
Minimal cut sets are the basis of reliability analysis using analytical techniques. At the present stage, minimal cut sets are mainly obtained by dealing with minimal path sets, which involves cumbersome steps and slower operational speed. The speed of reliability analysis is limited by that of calculating minimal cut sets. In consideration of the characteristics of microgrid, a hierarchical approach for fast calculating minimal cut sets is proposed in this paper. Firstly, an equivalent principle is proposed to convert topology structure into network node diagram; then grades of nodes are designated based on their original connection and the breadth-first search approach; afterwards, root-leaf matrices and selected matrix are created to specify the direction and order of the search. Next, all possible combinations of minimal cut sets are vertically traversed out by replacing root nodes with leaf nodes to achieve a more rapid access to minimal cut sets. Finally, taking the electrical structure of type A380 more electric aircraft as an example, mainstream methods are compared to show the correctness and advantage of our proposed method
Demand response from the control of aggregated inverter air conditioners
Inverter air conditioners (ACs) account for a large proportion of air conditioning loads in many countries and, thus, contribute significantly to the peak loads in these areas, especially in summer. On the other hand, as an important category of thermostatically controlled load with thermal energy storage capability, inverter ACs also have the potential to provide considerable flexibility for electric power systems that are faced with increasing challenges posed by high penetration of renewable power generation. This paper focuses on the demand response from the control of the aggregated inverter ACs for load reduction. A virtual energy storage system (VESS) model that encapsulates the room with an inverter AC was established based on the electric model of an inverter AC and the thermodynamic model of a room. Based on the VESS model, a virtual state of charge (VSOC) priority-based load reduction control method with temperature holding and linear recovery strategies was proposed. The VSOC priority based control was designed to decrease the negative impact of load reduction on customers’ thermal comfort from the perspective of the whole AC population. The temperature holding strategy was designed to reduce the electric power of an AC while ensuring that the indoor temperature is always below the allowable limit. The linear recover strategy was proposed to reduce the load rebound after load reduction. Four cases were studied regarding the operation and load reduction of the 100 inverter ACs, and the simulation results verified the models established and the effectiveness and advantages of the proposed load reduction control method
MPC-based interval number optimization for electric water heater scheduling in uncertain environments
In this paper, interval number optimization and model predictive control are proposed to handle the uncertain-but-bounded parameters in electric water heater load scheduling. First of all, interval numbers are used to describe uncertain parameters including hot water demand, ambient temperature, and real-time price of electricity. Moreover, the traditional thermal dynamic model of electric water heater is transformed into an interval number model, based on which, the day-ahead load scheduling problem with uncertain parameters is formulated, and solved by interval number optimization. Different tolerance degrees for constraint violation and temperature preferences are also discussed for giving consumers more choices. Furthermore, the model predictive control which incorporates both forecasts and newly updated information is utilized to make and execute electric water heater load schedules on a rolling basis throughout the day. Simulation results demonstrate that interval number optimization either in day-ahead optimization or model predictive control format is robust to the uncertain hot water demand, ambient temperature, and real-time price of electricity, enabling customers to flexibly adjust electric water heater control strategy
Minimal Cut Sets-Based Reliability Evaluation of the More Electric Aircraft Power System
The More Electric Aircraft (MEA) stands for the direction of aviation development in the new era, and the reliability of power systems on the MEA has attracted widespread attention. Based on the characteristics of MEA power systems, an equivalent method of electrical topology structure is presented in this article, and evaluation method is proposed which shows the reliability of the overall system with the reliability of specific nodes. Firstly, electrical topology structure of a MEA power system is converted into a network node diagram according to the proposed equivalent method. Then, the minimal path sets of specific nodes are obtained by the adjacent matrix algorithm, and the low-order minimal cut sets of disjointed are obtained. After that, the actual failure rate of components is converted to node failure rate, and the reliability of the overall system is evaluated by operational reliability indexes of specific nodes. Finally, taking the MEA A380 as an example, this paper compares and analyzes the reliability of AC loads, DC loads, and key loads to verify the validity and feasibility of the proposed evaluation method. This evaluation system can predict the weak points existing in the MEA power system, as well as providing theoretical support for maintenance schedule
An Improved Coordinated Control Strategy for PV System Integration with VSC-MVDC Technology
The rapid development of renewable energy calls for feasible and reliable technologies to transmit and integrate power into grids. Voltage Source Converter (VSC)- Direct Current (DC) technology is considered as a promising solution for its independent control of active and reactive power. Modeling and coordinated control of a large-scale concentrating photovoltaic integration system with VSC-MVDC (Voltage Source Converter-Medium Voltage Direct Current) technology have been investigated in this paper. The average controlled-source model of PhotoVoltaic (PV) integration system is firstly established. Then, a novel control strategy without fast communication is proposed to improve the reliability of the coordinated control system. An extra voltage loop is added to the basic control block, which is able to assure stable operation of the PV system in various conditions. Finally, the proposed control strategy is verified with simulation results
Experimental Design of an Innovative Electromechanical System for Induction Heating-Based Air Heating: Exploring Temperature Dynamics and Energy Efficiency
The energy efficiency of supplies is crucial for the energy economy. The development of new and more efficient air heaters is a relevant topic for various industrial applications. In the formulation of air heating using a novel and flexible electromechanical system that accomplishes heating air to varying temperatures, this study examines the efficacy of using induction heating as a fundamental component of air heating systems and focuses on the effective heating of moving metal parts by electromagnetic coupling, thereafter transmitting the generated heat to the experimental facilities. The study delved into an exploration of numerous factors within a closed system, encompassing aspects such as area, temperature, and energy. Using a full-bridge ZVS circuit with an inductive coil design, fan speed variations and temperature measurements were systematically carried out to investigate the impact of induction heating on temperature changes within the given experimental setups. The results of an experiment conducted in a half-cubic-meter enclosed environment reveal significant temperature fluctuations with the varying velocities of moving metal elements, presenting a maximal rate of 17.7 degrees Celsius per hour and an efficiency factor of 64.15%. With continued refinement, this innovative technology has the potential to become an energy-efficient alternative to conventional heating techniques for a variety of applications, including industrial operations and residential heating
A Capacitor Clamped H-Type Boost DC-DC Converter With Wide Voltage-Gain Range for Fuel Cell Vehicles
Random Harmonic Detection and Compensation Based on Synchronous Reference Frame
Algorithms for harmonic detection and compensation are important guarantees for an active power filter (APF) to achieve the harmonic control function and directly determine the overall performance. Existing algorithms usually need a large amount of computation, and the compensation effect of specified order harmonic is also limited. DC side capacitor voltage at sudden change of load is affected by the algorithm as well. This paper proposes a new algorithm for harmonic detection and compensation based on synchronous reference frame (SRF), in which a band-pass filter with center frequency of 6kth harmonic is designed in fundamental frequency SRF to extract random harmonic current with two different frequencies of (6k±1)th harmonic in stationary reference frame. This new algorithm can rapidly detect any specified harmonic, and it can adjust the power factor to compensate reactive power. Meanwhile, it has few impacts on DC side capacitor voltage under complicated operating conditions such as sudden change of load. The correctness and effectiveness of this new algorithm are verified by simulation and experiment
Modeling and Analysis of 12-Pulse Inverter in Shipboard or Aircraft
With the development of DC distribution system within the isolated power system of a ship or an aircraft, more constant frequency loads will be supplied by inverters connected to DC main bus. In the operating mode conversion process of an isolated power system, inverters will inevitably suffer from serious disturbance and affect the stability of the system. Therefore, it is important to establish a model of the inverter that reflects its dynamic characteristics and based on which to conduct the stability analysis. This paper proposes a 12-pulse inverter model based on the generalized state space averaging (GSSA) method. This model can overcome the limitations of 12-pulse inverter state space averaging (SSA) model in transient analysis with good accuracy and fast analysis ability effectively. Three kinds of models for a 12-pulse aircraft inverter are built in MATLAB, namely GSSA model, SSA model and detail device model. The simulation results show the high accuracy of GSSA model in stability analysis. This study provides an effective analytical tool for stability analysis of 12-pulse inverter and also provides a reference for inverter modeling research of isolated power system such as in aircraft or ship