Fracture in Phenolic Impregnated Carbon Ablator

The thermal protection materials used for spacecraft heat shields are subjected to various thermal-mechanical loads during an atmospheric entry which can threaten the structural integrity of the system. This paper discusses the development of a novel technique to understand the failure mechanisms inside thermal protection materials. The focus of research is Phenolic Impregnated Carbon Ablator (PICA). It has successfully flown on the Stardust spacecraft and is the TPS material chosen for the Mars Science Laboratory (MSL) and Dragon spacecraft. Although PICA has good thermal properties, structurally, it is a weak material. In order to thoroughly understand failure in PICA, fracture tests were performed on FiberForm* (precursor of PICA), virgin and charred PICA materials. Several samples of these materials were tested to investigate failure mechanisms at a microstructural scale. Stress-strain data were obtained simultaneously to estimate the fracture toughness. It was found that cracks initiated and grew in the FiberForm when a critical stress limit was reached such that the carbon fibers separated from the binder. However, both for virgin and charred PICA, crack initiation and growth occurred in the matrix (phenolic) phase. Both virgin and charred PICA showed greater strength values compared to FiberForm coupons, confirming that the presence of the porous matrix helps in absorbing the fracture energy

Fracture in Phenolic Impregnated Carbon Ablator

This paper describes the development of a novel technique to understand the failure mechanisms inside thermal protection materials. The focus of this research is on the class of materials known as phenolic impregnated carbon ablators. It has successfully flown on the Stardust spacecraft and is the thermal protection system material chosen for the Mars Science Laboratory and SpaceX Dragon spacecraft. Although it has good thermal properties, structurally, it is a weak material. To understand failure mechanisms in carbon ablators, fracture tests were performed on FiberForm(Registered TradeMark) (precursor), virgin, and charred ablator materials. Several samples of these materials were tested to investigate failure mechanisms at a microstructural scale. Stress-strain data were obtained simultaneously to estimate the tensile strength and toughness. It was observed that cracks initiated and grew in the FiberForm when a critical stress limit was reached such that the carbon fibers separated from the binder. However, both for virgin and charred carbon ablators, crack initiation and growth occurred in the matrix (phenolic) phase. Both virgin and charred carbon ablators showed greater strength values compared with FiberForm samples, confirming that the presence of the porous matrix helps in absorbing the fracture energy

PICA Variants with Improved Mechanical Properties

Phenolic Impregnated Carbon Ablator (PICA) is a member of the family of Lightweight Ceramic Ablators (LCAs) and was developed at NASA Ames Research Center as a thermal protection system (TPS) material for the Stardust mission probe that entered the Earth s atmosphere faster than any other probe or vehicle to date. PICA, carbon fiberform base and phenolic polymer, shows excellent thermal insulative properties at heating rates from about 250 W/sq cm to 1000 W/sq cm. The density of standard PICA - 0.26 g/cu cm to 0.28 g/cu cm - can be changed by changing the concentration of the phenolic resin. By adding polymers to the phenolic resin before curing it is possible to significantly improve the mechanical properties of PICA without significantly increasing the density

La teoría del reembolso en la sociedad de gananciales frente al enriquecimiento sin causa en el Código Civil Peruano

El presente trabajo tiene como objetivo general determinar si existen fundamentos jurídicos para incorporar la teoría del reembolso en la liquidación de la sociedad de gananciales frente al enriquecimiento sin causa entre los cónyuges en el código civil peruano. Es un estudio cuantitativo con diseño básico, el cual se realizó contando con una población de veinte (20) abogados a quienes se les aplicó como técnica la encuesta y como instrumento el cuestionario sobre las dos variables de investigación. Los datos fueron procesados con el software SPSS versión 20.0 el cual tras ser aplicado permitieron establecer como resultado que si existen fundamentos jurídicos para incorporar la teoría del reembolso en la liquidación de la sociedad de gananciales frente al enriquecimiento sin causa entre cónyuges a través de la incorporación de criterios durante los procesos de disolución de gananciales , el valor del bien, la calidad del bien a lo largo del tiempo y el papel o rol que ha cumplido el cónyuge en desbalance patrimonial al interior del matrimonio

Thermal and Structural Performance of Woven Carbon Cloth For Adaptive Deployable Entry and Placement Technology

Arcjet testing and analysis of a three-dimensional (3D) woven carbon fabric has shown that it can be used as a thermal protection system and as a load bearing structural component for a low ballistic coefficient hypersonic decelerator called ADEPT (Adaptive Deployable Entry and Placement Technology). Results of arcjet tests proved that the 3D woven carbon fabric can withstand flight-like heating while under flight-like biaxial mechanical loads representative of those encountered during shallow entry flight path angles into the atmosphere of Venus. Importantly, the arcjet test results have been used to extend a preliminary material thermal response model based on previous testing of the same 3D woven carbon fabric under uni-axial mechanical loading

Molecular Diagnosis of Leishmaniasis in Spain: Development and Validation of Ready-To-Use Gel-Form Nested and Real-Time PCRs To Detect Leishmania spp

Leishmaniasis is an endemic parasitic disease in at least 98 countries. In Spain, it is considered a zoonosis caused by Leishmania infantum, with an annual incidence of 0.62 cases/100,000 inhabitants. The predominant clinical manifestations are the cutaneous (CL) and visceral forms (VL), and the diagnosis is performed by parasitological, serological, and molecular tests. At the WHO Collaborating Center for Leishmaniasis (WHOCCLeish), routine diagnostic tests are based on a nested PCR (Ln-PCR), culture, and serological tests. To simplify our PCR protocol, we aimed to develop and validate a ready-to-use nested gel-form PCR (LeishGelPCR) and a duplex real-time PCR (qPCR) that allowed simultaneous detection of Leishmania and mammalian DNA as an internal control (Leish-qPCR). Clinical validation was performed in 200 samples from the WHOCCLeish collection; 92 and 85 out of 94 and 87 samples were positive by LeishGelPCR and Leish-qPCR, respectively, showing a sensitivity of 98% in both approaches. The specificity was 100% for LeishGelPCR and 98% for Leish-qPCR. The limits of detection of both protocols were similar (0.5 and 0.2 parasites/reaction). Parasite loads in VL and CL forms were similar, although high loads were observed when invasive samples were tested. In conclusion, LeishGelPCR and Leish-qPCR showed excellent performance in the diagnosis of leishmaniasis. These new forms of 18S rRNA gene PCR are equivalent to Ln-PCR and can be introduced in the algorithm for CL and VL diagnosis. IMPORTANCE Although the gold standard for diagnosis of leishmaniasis is the microscopic observation of amastigotes, molecular techniques are becoming a cost-efficient alternative. Currently, PCR is a routine resource that is used in many reference microbiology laboratories. In this article, we have described two ways to improve the reproducibility and usability of the molecular detection of Leishmania spp. These new approaches could be introduced even in middle- and low-resource laboratories; one is a ready-to-use gel-form system of a nested PCR and the other is a real-time PCR. We show why molecular diagnosis is the best methodology to confirm a clinical suspicion of leishmaniasis with higher sensitivity than traditional methods, thus facilitating early diagnosis and timely treatment of human leishmaniasis.This research was supported by Subprograma Retos de Colaboración, Ministerio de Economía y Competitividad (RTC-2016-5245-1) and Agreement CNM-Mundo Sano Foundation-Spain (MVP 1379).S