2,475 research outputs found
Treadmill Exercise Alleviates Aging-induced Apoptosis in Rat Cardiac Myocytes
SummaryBackgroundThe incidence and prevalence of heart failure increases with age. Cardiomyocyte apoptosis contributes to the pathogenesis of heart failure. In the end-stage of human heart failure, increased cardiomyocyte apoptosis is observed. Exercise training is one of the nonpharmacological treatments for chronic heart failure.MethodsIn the present study, we investigated the effect of treadmill exercise on the aging-induced apoptosis within cardiac myocytes in relation to the expression of heat shock protein 70 (HSP70) using rats. Terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) staining and Western blotting for the expression of Bcl-2, Bax, HSP70, and phosphorylated p38 (p-p38) in the cardiac myocardium were conducted.ResultsAging induced apoptosis in the myocardium, which was confirmed by increased TUNEL-positive cells and the enhancement of Bax. Expression of HSP70 was suppressed and p-p38 expression was enhanced by aging. Treadmill exercise alleviated aging-induced apoptosis with enhancing HSP70 expression and suppressing p-p38 expression in the cardiac myocytes.ConclusionBased on the present results, it can be inferred that treadmill exercise can provide a cardioprotective effect on aging-induced apoptosis through the enhancement of HSP70 expression in the heart. Thus, regular exercise may be a useful strategy for preventing heart problems in the elderly
A Feasibility of Low Intensity Ultrasound Stimulation for Treatment or Prevention of Osteoporosis and Its-Related Fracture
Evaluation of the brain activation induced by functional electrical stimulation and voluntary contraction using functional magnetic resonance imaging
BACKGROUND: To observe brain activation induced by functional electrical stimulation, voluntary contraction, and the combination of both using functional magnetic resonance imaging (fMRI). METHODS: Nineteen healthy young men were enrolled in the study. We employed a typical block design that consisted of three sessions: voluntary contraction only, functional electrical stimulation (FES)-induced wrist extension, and finally simultaneous voluntary and FES-induced movement. MRI acquisition was performed on a 3.0 T MR system. To investigate activation in each session, one-sample t-tests were performed after correcting for false discovery rate (FDR; p < 0.05). To compare FES-induced movement and combined contraction, a two-sample t-test was performed using a contrast map (p < 0.01). RESULTS: In the voluntary contraction alone condition, brain activation was observed in the contralateral primary motor cortex (MI), thalamus, bilateral supplementary motor area (SMA), primary sensory cortex (SI), secondary somatosensory motor cortex (SII), caudate, and cerebellum (mainly ipsilateral). During FES-induced wrist movement, brain activation was observed in the contralateral MI, SI, SMA, thalamus, ipsilateral SII, and cerebellum. During FES-induced movement combined with voluntary contraction, brain activation was found in the contralateral MI, anterior cingulate cortex (ACC), SMA, ipsilateral cerebellum, bilateral SII, and SI. The activated brain regions (number of voxels) of the MI, SI, cerebellum, and SMA were largest during voluntary contraction alone and smallest during FES alone. SII-activated brain regions were largest during voluntary contraction combined with FES and smallest during FES contraction alone. The brain activation extent (maximum t score) of the MI, SI, and SII was largest during voluntary contraction alone and smallest during FES alone. The brain activation extent of the cerebellum and SMA during voluntary contraction alone was similar during FES combined with voluntary contraction; however, cerebellum and SMA activation during FES movement alone was smaller than that of voluntary contraction alone or voluntary contraction combined with FES. Between FES movement alone and combined contraction, activated regions and extent due to combined contraction was significantly higher than that of FES movement alone in the ipsilateral cerebellum and the contralateral MI and SI. CONCLUSIONS: Voluntary contraction combined with FES may be more effective for brain activation than FES-only movements for rehabilitation therapy. In addition, voluntary effort is the most important factor in the therapeutic process
The Influence of Tibial Positioning on the Diagnostic Accuracy of Combined Posterior Cruciate Ligament and Posterolateral Rotatory Instability of the Knee
Background: To determine if tibial positioning affects the external rotation of the tibia in a dial test for posterolateral rotatory instability combined with posterior cruciate ligament (PCL) injuries. Methods: Between April 2007 and October 2007, 16 patients with a PCL tear and posterolateral rotatory instability were diagnosed using a dial test. The thigh-foot angle was measured at both 30 ° and 90 ° of knee fl exion with an external rotation stress applied to the tibia in 2 different positions (reduction and posterior subluxation). The measurements were performed twice by 2 orthopedic surgeons. Results: In posterior subluxation, the mean side-to-side difference in the thigh-foot angle was 11.56 ± 3.01 ° at 30 ° of knee fl exion and 11.88 ± 4.03 ° at 90 ° of knee flexion. In the sequential dial test performed with the tibia reduced, the mean side-to-side difference was 15.94 ± 4.17 ° (p < 0.05) at 30 ° of knee fl exion and 16.88 ± 4.42 ° (p = 0.001) at 90 ° of knee fl exion. The mean tibial external rotation was 5.31 ± 2.86 ° and 6.87 ± 3.59 ° higher in the reduced position than in the posterior subluxation at both 30° and 90 ° of knee fl exion. Conclusions: In the dial test, reducing the tibia with an anterior force increases the ability of an examiner to detect posterolateral rotary instability of the knee combined with PCL injuries
Comparison of postoperative changes in the distal and proximal segments between conventional and sliding mini-plate fixation following mandibular setback
The purpose of the present study was to evaluate the postoperative three-dimensional (3D) changes in the proximal segments after mandibular setback sagittal split ramus osteotomy and to compare the changes between the conventional mini-plate fixation and semi-rigid sliding plate fixation
Remineralization Property of an Orthodontic Primer Containing a Bioactive Glass with Silver and Zinc
White spot lesions (WSLs) are irreversible damages in orthodontic treatment due to excessive etching or demineralization by microorganisms. In this study, we conducted a mechanical and cell viability test to examine the antibacterial properties of 0.2% and 1% bioactive glass (BAG) and silver-doped and zinc-doped BAGs in a primer and evaluated their clinical applicability to prevent WSLs. The microhardness statistically significantly increased in the adhesive-containing BAG, while the other samples showed no statistically significant difference compared with the control group. The shear bond strength of all samples increased compared with that of the control group. The cell viability of the control and sample groups was similar within 24 h, but decreased slightly over 48 h. All samples showed antibacterial properties. Regarding remineralization property, the group containing 0.2% of the samples showed remineralization properties compared with the control group, but was not statistically significant; further, the group containing 1% of the samples showed a significant difference compared with the control group. Among them, the orthodontic bonding primer containing 1% silver-doped BAG showed the highest remineralization property. The new orthodontic bonding primer used in this study showed an antimicrobial effect, chemical remineralization effect, and WSL prevention as well as clinically applicable properties, both physically and biologically
Effect of 457 nm Diode-Pumped Solid State Laser on the Polymerization Composite Resins: Microhardness, Cross-Link Density, and Polymerization Shrinkage
Objective: The purpose of the present study was to test the usefulness of 457 nm diode-pumped solid state (DPSS) laser as a light source to cure composite resins. Materials and methods: Five different composite resins were light cured using three different light-curing units (LCUs): a DPSS 457 nm laser (LAS), a light-emitting diode (LED), and quartz-tungsten-halogen (QTH) units. The light intensity of LAS was 560 mW/cm2, whereas LED and QTH LCUs was ∼900 mW/cm2. The degree of polymerization was tested by evaluating microhardness, cross-link density, and polymerization shrinkage. Results: Before water immersion, the microhardness of laser-treated specimens ranged from 40.8 to 84.7 HV and from 31.7 to 79.0 HV on the top and bottom surfaces, respectively, and these values were 3.3–23.2% and 2.9–31.1% lower than the highest microhardness obtained using LED or QTH LCUs. Also, laser-treated specimens had lower top and bottom microhardnesses than the other LCUs treated specimens by 2.4–19.4% and 1.4–27.8%, respectively. After ethanol immersion for 24 h, the microhardness of laser-treated specimens ranged from 20.3 to 63.2 HV on top and bottom surfaces, but from 24.9 to 71.5 HV when specimens were cured using the other LCUs. Polymerization shrinkage was 9.8–14.7 μm for laser-treated specimens, and these were significantly similar or lower (10.2–16.0 μm) than those obtained using the other LCUs. Conclusions: The results may suggest that the 457 nm DPSS laser can be used as a light source for light-curing dental resin composites
Ionothermal Synthesis of a Novel 3D Cobalt Coordination Polymer with a Uniquely Reported Framework: [BMI] 2
The framework of [RMI]2[Co2(BTC)2(H2O)2] (RMI = 1-alkyl-3-methylimidazolium, alkyl; ethyl (EMI); propyl (PMI); butyl (BMI)), which has uniquely occurred in ionothermal reactions of metal salts and H3BTC (1,3,5-benzenetricarboxylic acid), an organic ligand, reappeared in this work. Ionothermal reaction of cobalt acetate and H3BTC with [BMI]Br ionic liquid as the reaction medium yielded the novel coordination polymer [BMI]2[Co2(BTC)2(H2O)2] (compound B2). Similar ionothermal reactions with different [EMI]Br and [PMI]Br as the reaction media have been previously reported to produce [EMI]2[Co3(BTC)2(OAc)2] (compound A1) and [PMI]2[Co2(BTC)2(H2O)2] (compound B1), respectively. In contrast with the trinuclear secondary building unit of A1, the framework structure of B1 and B2 consists of dinuclear secondary building units in common, but with subtle distinction posed by the different size of the incorporated cations. These structural differences amidst the frameworks showed interesting aspects, including guest and void volume, and were used to explain the chemical trend observed in the system. Moreover, the physicochemical properties of the newly synthesized compound have been briefly discussed
Shiga toxin-associated hemolytic uremic syndrome complicated by intestinal perforation in a child with typical hemolytic uremic syndrome
- …