A Reuse-based framework for the design of analog and mixed-signal ICs

Despite the spectacular breakthroughs of the semiconductor industry, the ability to design integrated circuits (ICs) under stringent time-to-market (TTM) requirements is lagging behind integration capacity, so far keeping pace with still valid Moore's Law. The resulting gap is threatening with slowing down such a phenomenal growth. The design community believes that it is only by means of powerful CAD tools and design methodologies -and, possibly, a design paradigm shift-that this design gap can be bridged. In this sense, reuse-based design is seen as a promising solution, and concepts such as IP Block, Virtual Component, and Design Reuse have become commonplace thanks to the significant advances in the digital arena. Unfortunately, the very nature of analog and mixed-signal (AMS) design has hindered a similar level of consensus and development. This paper presents a framework for the reuse-based design of AMS circuits. The framework is founded on three key elements: (1) a CAD-supported hierarchical design flow that facilitates the incorporation of AMS reusable blocks, reduces the overall design time, and expedites the management of increasing AMS design complexity; (2) a complete, clear definition of the AMS reusable block, structured into three separate facets or views: the behavioral, structural, and layout facets, the two first for top-down electrical synthesis and bottom-up verification, the latter used during bottom-up physical synthesis; (3) the design for reusability set of tools, methods, and guidelines that, relying on intensive parameterization as well as on design knowledge capture and encapsulation, allows to produce fully reusable AMS blocks. A case study and a functional silicon prototype demonstrate the validity of the paper's proposals.Ministerio de Educación y Ciencia TEC2004-0175

On the suitability and development of layout templates for analog layout reuse and layout-aware synthesis

Accelerating the synthesis of increasingly complex analog integrated circuits is key to bridge the widening gap between what we can integrate and what we can design while meeting ever-tightening time-to-market constraints. It is a well-known fact in the semiconductor industry that such goal can only be attained by means of adequate CAD methodologies, techniques, and accompanying tools. This is particularly important in analog physical synthesis (a.k.a. layout generation), where large sensitivities of the circuit performances to the many subtle details of layout implementation (device matching, loading and coupling effects, reliability, and area features are of utmost importance to analog designers), render complete automation a truly challenging task. To approach the problem, two directions have been traditionally considered, knowledge-based and optimization-based, both with their own pros and cons. Besides, recently reported solutions oriented to speed up the overall design flow by means of reuse-based practices or by cutting off time-consuming, error-prone spins between electrical and layout synthesis (a technique known as layout-aware synthesis), rely on a outstandingly rapid yet efficient layout generation method. This paper analyses the suitability of procedural layout generation based on templates (a knowledge-based approach) by examining the requirements that both layout reuse and layout-aware solutions impose, and how layout templates face them. The ability to capture the know-how of experienced layout designers and the turnaround times for layout instancing are considered main comparative aspects in relation to other layout generation approaches. A discussion on the benefit-cost trade-off of using layout templates is also included. In addition to this analysis, the paper delves deeper into systematic techniques to develop fully reusable layout templates for analog circuits, either for a change of the circuit sizing (i.e., layout retargeting) or a change of the fabrication process (i.e., layout migration). Several examples implemented with the Cadence's Virtuoso tool suite are provided as demonstration of the paper's contributions.Ministerio de Educación y Ciencia TEC2004-0175

Geometrically-constrained, parasitic-aware synthesis of analog ICs

In order to speed up the design process of analog ICs, iterations between different design stages should be avoided as much as possible. More specifically, spins between electrical and physical synthesis should be reduced for this is a very time-consuming task: if circuit performance including layout-induced degradations proves unacceptable, a re-design cycle must be entered, and electrical, physical, or both synthesis processes, would have to be repeated. It is also worth noting that if geometric optimization (e.g., area minimization) is undertaken after electrical synthesis, it may add up as another source of unexpected degradation of the circuit performance due to the impact of the geometric variables (e.g., transistor folds) on the device and the routing parasitic values. This awkward scenario is caused by the complete separation of said electrical and physical synthesis, a design practice commonly followed so far. Parasitic-aware synthesis, consisting in including parasitic estimates to the circuit netlist directly during electrical synthesis, has been proposed as solution. While most of the reported contributions either tackle parasitic-aware synthesis without paying special attention to geometric optimization or approach both issues only partially, this paper addresses the problem in a unified way. In what has been called layout-aware electrical synthesis, a simulation-based optimization algorithm explores the design space with geometric variables constrained to meet certain user-defined goals, which provides reliable estimates of layout-induced parasitics at each iteration, and, thereby, accurate evaluation of the circuit ultimate performance. This technique, demonstrated here through several design examples, requires knowing layout details beforehand; to facilitate this, procedural layout generation is used as physical synthesis approach due to its rapidness and ability to capture analog layout know-how.Ministerio de Educación y Ciencia TEC2004-0175

Challenges in mixed-signal IC design of CNN chips in submicron CMOS

Summary form only given. The contrast observed between the performance of artificial vision machines and "natural" vision system is due to the inherent parallelism of the former. In particular, the retina combines image sensing and parallel processing to reduce the amount of data transmitted for subsequent processing by the following stages of the human vision system. Industrial applications demand CMOS vision chips capable of flexible operation, with programmable features and standard interfacing to conventional equipment. The CNN Universal Machine (CNN-UM) is a powerful methodological framework for the systematic development of these chips. Basic system-level targets in the design of these chips are to increase the cell density and operation speed. As the technology scales down to submicron all the lateral dimensions decrease by the scaling factor /spl lambda/, and the vertical dimensions scale as /spl lambda//sup -a/, where a is typically around 1/2. Ideally, cell density /spl prop//spl lambda//sup 2/ and time constant /spl prop//spl lambda//sup -2/. The article explains why this is not strictly true, and addresses the challenges involved in the design of CNN chips in submicron technologies.Comisión Interministerial de Ciencia y Tecnología TIC96-1392-C02-0

Switched-capacitor neural networks for linear programming

A circuit for online solving of linear programming problems is presented. The circuit uses switched-capacitor techniques and is thus suitable for monolithic implementation. The connection of the proposed circuit to analogue neural networks is also outlined.Comisión Interministerial de Ciencia y Tecnología ME87-000

Robust high-accuracy high-speed continuous-time CMOS current comparator

The authors present a CMOS current comparator which employs nonlinear negative feedback to obtain high-accuracy (down to 1.5pA) and high-speed for low input currents (8ns at 50nA). The new structure features a speed improvement of more than two orders of magnitude for a 1 nA input current, when compared to the fastest reported to date

Analog integrated neural-like circuits for nonlinear programming

A systematic approach for the design of analog neural nonlinear programming solvers using switched-capacitor (SC) integrated circuit techniques is presented. The method is based on formulating a dynamic gradient system whose state evolves in time towards the solution point of the corresponding programming problem. A neuron cell for the linear and the quadratic problem suitable for monolithic implementation is introduced. The design of this neuron and its corresponding synapses using SC techniques is considered in detail. An SC circuit architecture based on a reduced set of basic building blocks with high modularity is presented. Simulation results using a mixed-mode simulator (DIANA) and experimental results from breadboard prototypes are included, illustrating the validity of the proposed technique

Analog Neural Programmable Optimizers in CMOS VLSI Technologies

A 3-μm CMOS IC is presented demonstrating the concept of an analog neural system for constrained optimization. A serial time-multiplexed general-purpose architecture is introduced for the real-time solution of this kind of problem in MOS VLSI. This architecture is a fully programmable and reconfigurable one exploiting SC techniques for the analog part and making extensive use of digital techniques for programmability

A one-transistor-synapse strategy for electrically-programmable massively-parallel analog array processors

This paper presents a linear, four-quadrants, electrically-programmable, one-transistor synapse strategy applicable to the implementation of general massively-parallel analog processors in CMOS technology. It is specially suited for translationally-invariant processing arrays with local connectivity, and results in a significant reduction in area occupation and power dissipation of the basic processing units. This allows higher integration densities and therefore, permits the integration of larger arrays on a single chip.Comisión Interministerial de Ciencia y Tecnología TIC96- 1392-C02-0