828 research outputs found

    Energy Comparison between a Load Sensing System and Electro-Hydraulic Solutions Applied to a 9-Ton Excavator

    Get PDF
    With the increasingly stringent regulations on air quality and the consequent emission limits for internal combustion engines, researchers are concentrating on studying new solutions for improving efficiency and energy saving even in off-road mobile machines. To achieve this task, pump-controlled or displacement-controlled systems have inspired interest for applications in offroad working machines. Generally, these systems are derived from the union of a hydraulic machine coupled to an electric one to create compact components that could be installed near the actuator. The object of study of this work is a 9-ton excavator, whose hydraulic circuit is grounded on load sensing logic. The validated mathematical model, created previously in the Simcenter Amesim© environment, represents the starting point for developing electro-hydraulic solutions. Electric components have been inserted to create different architectures, both with open-and closed-circuit layouts, in order to compare the energy efficiency of the different configurations with respect to the traditional load sensing system. The simulations of a typical working cycle show the energy benefits of electrohydraulic solutions that allow for drastically reducing the mechanical energy required by the diesel engine and, consequently, the fuel consumption. This is mainly possible because of the elimination of directional valves and pressure compensators, which are necessary in a load sensing circuit, but are also a source of great energy dissipations. The results show that closed-circuit solutions produce the greatest benefits, with higher energy efficiencies than the open-circuit solution. Furthermore, closed-circuit configurations require fewer components, allowing for more compact and lighter solutions, as well as being cheaper

    Effect of a cognitive training program on the platelet app ratio in patients with alzheimer’s disease

    Get PDF
    In patients with Alzheimer’s disease (AD), synaptic plasticity seems to be involved in cognitive improvement induced by cognitive training. The platelet amyloid precursor protein (APP) ratio (APPr), i.e., the ratio between two APP isoforms, may be a useful peripheral biomarker to investigate synaptic plasticity pathways. This study evaluates the changes in neuropsychological/cognitive performance and APPr induced by cognitive training in AD patients participating in the “My Mind Project”. Neuropsychological/cognitive variables and APPr were evaluated in the trained group (n = 28) before a two-month experimental protocol, immediately after its termination at follow-up 1 (FU1), after 6 months at follow-up 2 (FU2), and after 24 months at follow-up 3 (FU3). The control group (n = 31) received general psychoeducational training for two months. Some memory and attention parameters were significantly improved in trained vs. control patients at FU1 and FU2 compared to baseline (∆ values). At FU3, APPr and Mini Mental State Examination (MMSE) scores decreased in trained patients. ∆ APPr correlated significantly with the ∆ scores of (i) MMSE at FU1, (ii) the prose memory test at FU2, and (iii) Instrumental Activities of Daily Living (IADL), the semantic word fluency test, Clinical Dementia Rating (CDR), and the attentive matrices test at FU3. Our data demonstrate that the platelet APPr correlates with key clinical variables, thereby proving that it may be a reliable biomarker of brain function in AD patients

    First Interferometric Observations of Molecular Gas in a Polar Ring: The Helix Galaxy NGC 2685

    Get PDF
    We have detected four Giant Molecular cloud Associations (GMAs) (sizes < 6.6'' ~ 430 pc) in the western and eastern region of the polar ring in NGC2685 (the Helix galaxy) using the Owens Valley Radio Observatory (OVRO) millimeter interferometer. Emission from molecular gas is found close to the brightest Halpha and HI peaks in the polar ring and is confirmed by new IRAM 30m single dish observations. The CO and HI line velocities are very similar, providing additional kinematic confirmation that the CO emission emerges from the polar ring. For the first time, the total molecular mass within a polar ring is determined (M_H2~(8-11)x10^6 M_sol, using the standard Galactic conversion factor). We detect about M_H2~4.4x10^6 M_sol in the nuclear region with the single dish. Our upper limit derived from the interferometric data is lower (M_H2<0.7x10^6 M_sol) suggesting that the molecular gas is distributed in an extended (< 1.3 kpc) diffuse disk. These new values are an order of magnitude lower than in previous reports. The total amount of molecular gas and the atomic gas content of the polar ring are consistent with formation due to accretion of a small gas-rich object, such as a dwarf irregular. The properties of the NGC2685 system suggest that the polar ring and the host galaxy have been in a stable configuration for a considerable time (few Gyr). The second (outer) HI ring within the disk of NGC2685 is very likely at the outer Lindblad resonance (OLR) of the ~ 11 kpc long stellar bar.Comment: 8 pages, 4 figures, accepted by ApJ Letter

    The First CO Map of a Low Surface Brightness Galaxy

    Full text link
    Using the Owens Valley Radio Observatory Millimeter-Wavelength Array (OVRO) we have obtained the first CO map of a low surface brightness (LSB) galaxy. The studied galaxy, UGC 01922, was chosen for these observations because both of its previous CO detection with the IRAM 30m telescope and its classification as a Malin 1 `cousin' - an LSB galaxy with M_HI > 10^10 Msol. The OVRO map detected approximately 65% of the CO(1-0) flux found earlier with the single dish measurements, giving a detected gas mass equivalent to M_H2 = 1.1X10^9 Msol. The integrated gas peak lies at the center of the galaxy and coincides with both the optical and 1.4 GHz continuum emission peaks. The molecular gas extends well beyond the OVRO beam size (~4'' or 3 kpc), covering ~25% of the optical bulge. In all, perhaps the most remarkable aspect of this map is its unexceptional appearance. Given that it took over ten years to successfully detect molecular gas in any low surface brightness system, it is surprising that the appearance and distribution of UGC 01922's CO is similar to what would be expected for a high surface brightness galaxy in the same morphological class.Comment: 5 pages, including 3 figures and 3 tables. also available online at http://www.gb.nrao.edu/~koneil. Accepted by ApJ

    Atomic Carbon in Galaxies

    Get PDF
    We present new measurements of the ground state fine-structure line of atomic carbon at 492 GHz in a variety of nearby external galaxies, ranging from spiral to irregular, interacting and merging types. In comparison with CO(1-0), the CI(1-0) intensity stays fairly comparable in the different environments, with an average value of the ratio of the line integrated areas in Kkm/s of CI(1-0)/CO(1-0) = 0.2 +/- 0.2. However, some variations can be found within galaxies, or between galaxies. Relative to CO lines, CI(1-0) is weaker in galactic nuclei, but stronger in disks, particularly outside star forming regions. Also, in NGC 891, the CI(1-0) emission follows the dust continuum at 1.3mm extremely well along the full length of the major axis where molecular gas is more abundant than atomic gas. Atomic carbon therefore appears to be a good tracer of molecular gas in external galaxies, possibly more reliable than CO. Atomic carbon can contribute significantly to the thermal budget of interstellar gas. Cooling due to C and CO amounts typically to 2 x 10^{-5} of the FIR continuum or 5% of the CII line. However, C and CO cooling reaches 30% of the gas total, in Ultra Luminous InfraRed Galaxies, where CII is abnormally faint. Together with CII/FIR, the emissivity ratio CI(1-0)/FIR can be used as a measure of the non-ionizing UV radiation field in galaxies.Comment: 26 pages, 8 figure

    Spin configurations in hard-soft coupled bilayer systems: from rigid magnet to exchange spring transitions

    Full text link
    We investigate equilibrium properties of an exchange-spring magnetic system constituted of a soft layer (e.g. Fe) of a given thickness on top of a hard magnetic layer (e.g. FePt). The magnetization profile M(z) as a function of the atomic position ranging from the bottom of the hard layer to the top of the soft layer is obtained in two cases with regard to the hard layer: i) in the case of a rigid interface (the FePt layer is a single layer), the profile is obtained analytically as the exact solution of a sine-Gordon equation with Cauchy's boundary conditions. Additional numerical simulations also confirm this result. Asymptotic expressions of M(z) show a linear behavior near the bottom and the top of the soft layer. In addition, a critical value of the number of atomic planes in the soft layer, that is necessary for the onset of spin deviations, is obtained in terms of the anisotropy and exchange coupling between the adjacent plane in the soft layer. ii) in the case of a relaxed interface (the FePt layer is a multilayer), the magnetization profile is obtained numerically for various Fe and FePt films thicknesses and applied field.Comment: 10 pages, 9 figures, PRB submitted (12-07-2010

    Tuning morphology and magnetism in epitaxial L10-FePt films

    Get PDF
    In this work, well-ordered epitaxial FePt thin ¿lms have been grown by RF sputtering on two different substrates (MgO (100) and SrTiO3 (100)) and the effect of different lattice parameters between the substrate and FePt ¿lm on morphology and magnetic behavior has been considered. Growth conditions have been optimized to obtain different morphologies and magnetic behaviors
    corecore