Effect of the concentrations of maltogenic α-amylase and fat on the technological and sensory quality of cakes

The characteristics that define cake quality can be improved by the use of adequate ingredients and a correct balance of the formulation. Fat is used for its effect on softness and because it imparts flavor and calories. Enzymes such as maltogenic α-amylase can also have a positive effect on cake texture during storage by decreasing amylopectin re-crystallization and thus delaying starch retrogradation providing longer-lasting crumb softness. The objective of this study was to determine the effect of different concentrations of maltogenic α-amylase and fat on the technological and sensory characteristics of cakes. Therefore, balanced formulations with three different fat concentrations (20, 40, and 60 g/100 g, based on the flour content) were used to evaluate the addition of maltogenic α-amylase (0, 500, and 1000 mg/kg). Technological quality determinations were carried out on days 1, 7, 14, and 21 of storage. The best results in terms of cake quality (greater specific volume, higher crumb moisture content, lower crumb firmness, and greater sensory acceptance) were obtained with the combination of 20 g/100 g fat and 1000 mg/kg maltogenic α-amylase (based on the flour content), which proved to be an alternative to reduce the fat levels in the elaboration of this type of product34476076

Physicochemical and sensory characteristics of pan bread samples available in the brazilian market

Pan bread samples available in the Brazilian market were evaluated for their physicochemical and sensory characteristics. Twelve pan breads, seven white and five whole grain breads, were evaluated. Moisture, water activity (Aw), firmness, and color (L*, a*, b*) of the crumb were evaluated on the first, fourth, seventh, and tenth days after purchasing the breads. Specific volume was evaluated on the first day of analysis with averages of 4.72 and 4.70 mL/g for the white and whole grain breads, respectively. The average results on the first day of analysis were: 37.03% and 41.23% moisture, 0.954 and 0.966 Aw, 276.27 and 267.83 gf firmness, 74.73 and 64.45 L* values, 0.37 and 3.85 a* values, and 15.51 and 18.98 b* values for the white and whole grain breads, respectively. The samples showed an increase in firmness, reduction in moisture and Aw, and no color changes over time. A survey conducted prior to the acceptance test showed that the three most important factors influencing purchase were taste (19.6%), tenderness (16.8%), and expiration date of the product (14.3%). The results showed that 37.2% of the panelists preferred white bread, 62.8% preferred bread with fibers, and 82.6% would probably or definitely buy white bread with fibers344746754CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQSem informaçã

Food Additives and Processing Aids used in Breadmaking

The main classes of additives used in breadmaking are: (i) oxidants/reductants; (ii) emulsifiers; (iii) hydrocolloids; and (iv) preservatives. The main processing aids used are enzymes. Historically, market trends have developed from the use of ingredients in greater quantities - to obtain specific effects in bread (such as fat for crumb softness) - to the use of additives at much lower levels (max. 1%) and, more recently, to enzymes which are used in parts per million (ppm). According to many regulations, enzymes do not need to be declared on the label of the final product, attending the “clean label” trend. We will describe the food additives used under each class, individually describing their mode of action and effects on dough rheology, during the breadmaking process, and on product quality. We will also describe the main enzymes currently used, dividing them according to the substrate they act on (gluten, starch, lipids, non-starch polysaccharides or NSPS), individually describing their mode of action and effects on dough rheology, during the breadmaking process, and on product quality. Legal aspects will also be addressed. We will conclude with future trends in the use of additives and processing aids in breadmaking

The effect of the application of transglutaminase enzyme on spaguetti type dry pasta

Dry pasta is a very popular product, which has a large and growing market in Brazil. Alongside the increase in consumption, there has been a search for products classified as “clean label”, which are alternatives with fewer additives in their composition. It is known that for pasta preparation it is necessary to use strong flour. The use of enzymes for the total or partial replacement of additives in the food industry can be expanded, as there are still little explored applications. Therefore, this work aimed to evaluate the effect of the enzyme transglutaminase (TG) in the preparation of spaghetti type dry pasta. Different samples of pasta were prepared and evaluated at four points of their shelf life (after 1, 15, 30 and 45 days) regarding the ideal cooking time, the mass increase of the cooked pasta, loss of solids in the cooking water and instrumental texture (pasta firmness). Eight assays were performed: TC (CONTROL without TG), TG1, TG2, TG3, TG4, TG5, TG6 (with 50, 100, 150, 200, 300, 1000 ppm of TG, respectively), and TP (standard containing ascorbic acid). The results showed that the tests with the highest concentration of TG showed an increase in mass of the cooked pasta, lower solids loss and greater firmness of the pasta after cooking. On the other hand, TP and TC did not differ significantly, and showed lower mass gain and greater solids loss during cooking. The results indicate that the application of TG may be promising to improve the technological quality of spaghetti type dry pasta

Partial-hydrothermal hydrolysis is an effective way to recover bioactives from turmeric wastes

Partial-hydrothermal hydrolysis using pressurized hot water was applied in waste turmeric, derived from extraction processes that employed supercritical and pressurized fluids, as a sustainable alternative for the recovery of bioactive constituents from this material. The reaction products consisted of a liquid extract of fermentable sugars and a solid fraction, which is a mixed biopolymer with relevant composition in terms of starch and antioxidant constituents. The effects of reaction conditions on resulting products were investigated. Economic evaluation was also performed showing that application of partial-hydrothermal hydrolysis from a residual feedstock is feasible in terms of low spend of energy and materials38228029

Snacks extrusados funcionais com licopeno e proteína de soja

In this work, the effects of thermoplastic extrusion process parameters (raw material moisture content and temperature) and the addition of functional ingredients (lycopene and soy protein) on quality characteristics of a base-formulation for extruded corn snacks were studied, with the objective of developing an easy-to-eat functional product. A single-screw Labor PQ 30 model Inbramaq extruder was used for extrusion and a central composite rotational design (CCRD) was followed. The independent variables were: i) percentage of soy protein isolate (0-30%); ii) percentage of lycopene preparation (0-0.1%); iii) raw material moisture content (20-30%); and iv) 5th zone temperature (100-150 °C). The expansion index reached maximum values with the lowest raw material moisture content (20%) and intermediate temperatures (approximately 125 °C). Instrumental hardness was higher with high moisture and low temperature; however, increasing the percentage of soy protein was beneficial for the texture of the product, reducing hardness. The red color intensity increased with the increase in lycopene content and moisture, and with the reduction of temperature. Sensory acceptance tests were carried out for two products, with maximum percentages of the functional ingredients, 20% moisture and temperatures of 125 and 137 °C, with greater acceptance for the product extruded at 125 °C.Neste trabalho, estudou-se a influência de parâmetros do processo de extrusão termoplástica (umidade da matéria-prima e temperatura) e da adição de ingredientes funcionais (licopeno e proteína de soja) sobre características de qualidade de uma formulação-base para snacks extrusados de milho, com o objetivo de desenvolver um alimento funcional de fácil consumo. Utilizou-se um extrusor monorrosca Inbramaq, modelo Labor PQ 30, e seguiu-se um planejamento experimental com as seguintes variáveis independentes: i) teor de isolado proteico de soja (0 a 30%); ii) teor de preparado de licopeno (0 a 0,1%); iii) umidade da matéria-prima (20 a 30%); e iv) temperatura do extrusor na zona 5 (100 a 150 °C). O índice de expansão atingiu valores máximos com o menor valor de umidade da matéria-prima (20%) e temperatura intermediária (aproximadamente 125 °C). A dureza instrumental foi mais elevada com umidade alta e temperatura baixa, entretanto, o aumento do teor de proteína de soja foi benéfico para a textura do produto final, reduzindo a dureza. A intensidade da coloração vermelha aumentou com o aumento do teor de licopeno e da umidade, e com a diminuição da temperatura. Foram realizados testes de aceitação sensorial para dois produtos, com os teores máximos dos ingredientes funcionais, 20% umidade e temperaturas de 125 e 137 °C, obtendo-se maior aceitação para o produto extrusado a 125 °C.14315

Application of lipase and monoglyceride in fiber enriched pan bread

In this work, the application of lipase and monoglyceride in fiber enriched pan bread was studied, to verify the possibility of substituting the emulsifier by the enzyme. Initially, the main raw materials (flour and wheat bran) were characterized. The pan breads were produced using the straight dough method. A central composite rotational design was used, with two independent variables: i) lipase dosage; and ii) monoglyceride dosage and, in parallel, a control test was carried out (without the addition of lipase and monoglyceride) for comparison. The dependent variables or responses were the quality characteristics of the breads: i) specific volume; ii) sensory acceptance (appearance, texture, aroma and taste); and iii) shelf life evaluated by crumb moisture and firmness after one, four and seven days from baking. Within the ranges studied, it was possible to verify that only crumb moisture on the fourth and seventh days after processing was influenced by the variation of the lipase and monoglyceride dosages. In the sensory evaluation, it was observed that the average scores attributed to the control breads were lower than the lowest average of the experimental design trials, except for taste and aroma. As it was not possible to obtain mathematical models for all the responses, Assays 5 (1% monoglyceride), 7 (25 ppm lipase) and 9 (25 ppm lipase and 1% monoglyceride) of the experimental design, and the control test, were selected for the evaluation of the results by analysis of variance. In the conditions used and for the dosages of lipase (0 to 50 ppm) and monoglyceride (0 to 2%) used, the possibility to substitute monoglyceride by lipase in fiber enriched pan bread was verified.Neste trabalho, estudou-se a aplicação da enzima lipase e do emulsificante monoglicerídeo em pão de forma enriquecido com fibras, com o objetivo de verificar a possibilidade de substituição do emulsificante pela enzima. Inicialmente, foi realizada a caracterização das matérias-primas principais (farinha e farelo de trigo). Os pães de forma foram elaborados pelo método de massa direta. Foi utilizado um planejamento experimental do tipo composto central rotacional com duas variáveis independentes: i) dosagem de lipase; e ii) dosagem de monoglicerídeo e, paralelamente, realizou-se um teste controle (sem adição de lipase e monoglicerídeo) para comparação. As variáveis dependentes foram as características de qualidade dos pães: i) volume específico; ii) aceitação sensorial (aparência, textura, aroma e sabor); e iii) vida de prateleira avaliada pela umidade do miolo e firmeza dos pães após 1, 4 e 7 dias do forneamento. Dentro das faixas estudadas, foi possível verificar que somente a umidade dos pães no quarto e sétimo dia após o processamento foi influenciada pela variação das dosagens de lipase e monoglicerídeo. Na avaliação sensorial, verificou-se que as notas médias atribuídas aos pães do teste controle foram inferiores à menor nota média dos ensaios do planejamento experimental, com exceção do sabor e aroma. Como não foi possível obter modelos matemáticos para todas as respostas, foram selecionados os ensaios 5 (1% monoglicerídeo), 7 (25 ppm lipase) e 9 (25 ppm lipase e 1% monoglicerídeo) do planejamento experimental, e o teste controle, para a avaliação dos resultados por análise de variância. Nas condições em que os ensaios foram conduzidos e para as faixas de lipase (0 a 50 ppm) e monoglicerídeo (0 a 2%) estudadas, verificou-se a possibilidade de substituir o monoglicerídeo por lipase em formulação de pão de forma enriquecido com fibras.18219

Galletas con grasas cero trans a base de soja formuladas usando una red neuronal artificial.

This study applied Artificial Neural Network (ANN) technology to formulate zero trans fat blends derived from soybeans and to evaluate their performance when applied to the processing of sweet laminated biscuits. For the formulation of the blends, two interesterified soybean fats and soybean oil were used as bases. They were characterized in terms of melting point, solid fat content and fatty acid composition; and the biscuits produced were analyzed for their technological (dimensions, mass, volume, expansion, instrumental color and texture, moisture gradient and cracking) and physicochemical characteristics (total fat and moisture contents, water activity and fatty acid composition). It was possible to verify the use of ANN to develop zero trans fats derived from soybeans for application in sweet laminated biscuits, which represents an operational and financial advantage. Moreover, we showed the viability of using soybean fats/oil, raw materials of greater availability and lower cost, for the production of biscuits.Este estudio aplic? la tecnolog?a de Redes Neuronales Artificiales (RNA) para formular mezclas de grasas cero trans derivadas de soja y evaluar su papel cuando se usan en el procesamiento de galletas dulces laminadas. Para la formulaci?n de las mezclas se usaron como base dos grasas de soja interesterificadas as? como aceite de soja. Se caracterizaron en t?rminos de punto de fusi?n, contenido de grasa s?lida y composici?n de ?cidos grasos, y a las galletas se les determin? sus caracter?sticas tecnol?gicas (dimensiones, masa, volumen, color, textura, gradiente de humedad as? como otros controles) y fisicoqu?micas (contenidos de grasa total, humedad, actividad de agua y composici?n de ?cidos grasos). Fue posible verificar el uso de RNA para desarrollar grasas cero trans derivadas de soja, para su aplicaci?n en galletas dulces laminadas, lo que representa una ventaja operativa y financiera. Adem?s, mostramos la viabilidad de usar grasas/aceite de soja, materias primas de mayor disponibilidad y menor costo, para la producci?n de galletas