11 research outputs found

    High-voltage pulse generator based on sequentially charged MMC-SMs operating in a voltage-boost mode

    Get PDF
    Pulse forming networks and Marx generators are the classical rectangular waveform pulse generators (PGs). They are inflexible and their capacitors must be fully charged to the required voltage from 0V before delivering each high-voltage (HV) pulse. They are only able to generate unipolar pulses; if bipolar pulses are sought another generator fed from a negative supply voltage is added. Recently, several power electronics based PGs have been proposed. This paper presents an HV power electronics based PG, which is based on Half-Bridge Modular Multilevel Converter (HB-MMC) sub-modules (SMs) charged sequentially in a voltage boost mode. Each SM capacitor and main switch form a boost converter with the charging input supply and inductor. As a result, all SM capacitors are charged to a voltage greater than the input. During the discharging process the SM capacitors are connected in series, producing a rectangular HV pulse across the load. The proposed charging method allows a reduction in the converter footprint in comparison with recently proposed MMC sequentially charged PG topologies. Although only rectangular pulse waveforms are sought in this paper, a SM capacitor voltage balance method allows multilevel pulse generation. The viability of the proposed converter is confirmed by MATLAB/Simulink simulation and scaled-down experimentation

    Solid-state Marx based two-switch voltage modulator for the On-Line Isotope Mass Separator accelerator at the European Organization for Nuclear Research

    Get PDF
    A new circuit topology is proposed to replace the actual pulse transformer and thyratron based resonant modulator that supplies the 60 kV target potential for the ion acceleration of the On-Line Isotope Mass Separator accelerator, the stability of which is critical for the mass resolution downstream separator, at the European Organization for Nuclear Research. The improved modulator uses two solid-state switches working together, each one based on the Marx generator concept, operating as series and parallel switches, reducing the stress on the series stacked semiconductors, and also as auxiliary pulse generator in order to fulfill the target requirements. Preliminary results of a 10 kV prototype, using 1200 V insulated gate bipolar transistors and capacitors in the solid-state Marx circuits, ten stages each, with an electrical equivalent circuit of the target, are presented, demonstrating both the improved voltage stability and pulse flexibility potential wanted for this new modulator

    New technique for uniform voltage sharing in series stacked semiconductors

    Full text link

    Solid state marx modulator with blumlein stack for bipolar pulse generation

    Full text link

    Novel design of the converter for an active UPS application based on Marx modulator concept with supercapacitors

    Full text link
    A new Marx modulator 4-leg multilevel converter is proposed to replace the well-known 4-leg inverter fed from batteries in Uninterruptible Power Supply (UPS) applications. The novel design concept for the Marx modulator based multilevel converter is presented and described. Each leg uses 2 Marx modulator modules, each one using an Electrochemical Double-Layer Capacitor (EDLC) (also known as supercapacitor (SC)) energy storage bank. The new topology concept enables multilevel operation with five voltage level per phase, allowing high quality voltage and current waveforms, distributed supercapacitor storage and reduction of supercapacitor bank voltage. The proposed converter can operate as UPS or as Active Power Filter (APF), powering non-linear or/and unbalanced loads, while balancing each leg supercapacitor voltage. A control strategy to choose the redundant vector configuration to balance the supercapacitor voltages is explained. Simulation results are presented for a Marx modulator based interactive 40 kVA UPS.info:eu-repo/semantics/publishedVersio

    Resonant converter topology for the new ISOLDE/CERN modulator

    Full text link
    This paper describes a new resonant converter topology, using a solid-state asymmetric bridge to increase the energy efficiency of the solid-state switching circuit being designed to replace the actual pulse transformer and thyratron based resonant modulator that supplies the 60 kV target potential for the ion acceleration of the On-Line Isotope Mass Separator ISOLDE accelerator. The preliminary results of a 5 kV laboratory prototype validate this concept, however the design of all components, including a high-voltage coil, as well as, the selection of the semiconductors proven to be crucial in order to reduce the energy dissipation during the recovery process

    Optimized solid-state bipolar Marx modulador with resonant type droop compensation

    Get PDF
    Este trabalho foi financiado pelo Concurso Anual para Projetos de Investigação, Desenvolvimento, Inovação e Criação Artística (IDI&CA) 2016 do Instituto Politécnico de Lisboa. Código de referência IPL/2016/MBOCDTI_ISELIn this paper a voltage droop compensation based on a resonant circuit is proposed for the optimized solid-state bipolar Marx modulator. Keeping the modularity characteristics and the circuit topology, one auxiliary resonant stage was added to the existing Marx stages. The compensation concept consists of adding the auxiliary voltage to the output positive or negative pulse for voltage droop compensation. Simulation results are presented for five stages Marx circuit, 10% voltage droop, using 800 V per stage, 100 ps pulse duration at 50Hz frequency.info:eu-repo/semantics/publishedVersio
    corecore