Particle Shape Characterisation and Classification using Automated Microscopy and Shape Descriptors in Batch Manufacture of Particulate Solids

It is known that size alone, as often defined as the volume equivalent diameter, is not sufficient for characterizing many particulate products. The shape of crystalline products can be as important as size in many applications. Traditionally particulate shape is often defined by some simple descriptors such as the maximum length and aspect ratio. Although these descriptors are intuitive, they result in loss of some information of the original shape. This paper presents a method to use principal component analysis (PCA) to derive simple latent shape descriptors from microscope images of particulate products made in batch processes, and the use of the descriptors for identification of batch to batch variations. Data from batch runs of both a laboratory crystalliser and an industrial crystallisation reactor are analysed using the approach. Qualitative and quantitative comparison with the use of traditional shape descriptors that have physical meanings and Fourier shape descriptors is also made

Stereo Imaging Camera Model for 3D Shape Reconstruction of Complex Crystals and Estimation of Facet Growth Kinetics

The principle that the 3D shape of crystals that grow from a solution can be characterised in real-time using stereo imaging has been demonstrated previously. It uses the 2D images of a crystal that are obtained from two or more cameras arranged in defined angles as well as a mathematical reconstruction algorithm. Here attention is given to the development of a new and more robust 3D shape reconstruction method for complicated crystal structures. The proposed stereo imaging camera model for 3D crystal shape reconstruction firstly rotates a digitised crystal in the three-dimensional space and varies the size dimensions in all face directions. At each size and orientation, 2D projections of the crystal, according to the angles between the 2D cameras, are recorded. The contour information of the 2D images is processed to calculate Fourier descriptors and radius-based signature that are stored in a database. When the stereo imaging instrument mounted on a crystalliser captures 2D images, the images are segmented to obtain the contour information and processed to obtain Fourier descriptors and radius-based information. The calculated Fourier descriptors and radius-based signature are used to find the best matching in the database. The corresponding 3D crystal shape is thus found. Potash alum crystals that each has 26 habit faces were used as a case study. The result shows that the new approach for 3D shape reconstruction is more accurate and significantly robust than previous methods. In addition, the growth rates of {111}, {110} and {100} faces were correlated with relative supersaturation to derive models of facet growth kinetics

On-line measurement of the real size and shape of crystals in stirred tank crystalliser using non-invasive stereo vision imaging

Non-invasive stereo vision imaging technique was applied to monitoring a cooling crystallisation process in a stirred tank for real-time characterisation of the size and shape of needle-like l-glutamic acid (L-GA) β polymorphic crystals grown from solution. The instrument consists of two cameras arranged in an optimum angle that take 2D images simultaneously and are synchronised with the lighting system. Each 2D image pair is processed and analysed and then used to reconstruct the 3D shape of the crystal. The needle shaped L-GA β form crystal length thus obtained is found to be in good agreement with the result obtained from off-line analysis of crystal samples, and is about three times larger than that estimated using 2D imaging technique. The result demonstrates the advantage of 3D imaging over 2D in measurement of crystal real size and shape

Using an on-line image analysis technique to characterize sucrose crystal morphology during a crystallization run

The morphological forms and habits of crystals and agglomeration are important properties on crystallization processes. Online techniques for realtime measurement of these properties are mandatory for a better comprehension of crystal growth phenomenon. The present paper presents and describes a new online method to determine the complexity level of a crystal or a population of crystals during a crystallization process. An image analysis technique is combined with discriminant factorial analysis leading to results that allow the computation of the complexity of crystals through the parameter agglomeration degree of crystals. With this methodology, it has been possible to distinguish online and automatically among three different classes of crystals according to their complexity. It further describes the application of such methodology on the study of CaCl2, D-fructose, and D-glucose influence on the crystallization of sucrose, namely, on crystal size, morphology, and complexity. The effect of supersaturation, growth rate, and impurity concentration on the type, amount, and complexity level of the agglomerates was determined at different temperatures. The combination of image analysis and kinetic results allowed to understand better the crystallization phenomena in the presence and absence of impurities. The image analysis results suggest the possible application of this tool for process control, optimizing, by this way, laboratory and industrial crystallizers.This work was supported by Fundacao para a Ciencia e Tecnologia under program contract numbers SFRH/BD/11315/2002 and SFRH/BPD/45637/2008

How Morphological Constraints Affect Axonal Polarity in Mouse Neurons

Neuronal differentiation is under the tight control of both biochemical and physical information arising from neighboring cells and micro-environment. Here we wished to assay how external geometrical constraints applied to the cell body and/or the neurites of hippocampal neurons may modulate axonal polarization in vitro. Through the use of a panel of non-specific poly-L-lysine micropatterns, we manipulated the neuronal shape. By applying geometrical constraints on the cell body we provided evidence that centrosome location was not predictive of axonal polarization but rather follows axonal fate. When the geometrical constraints were applied to the neurites trajectories we demonstrated that axonal specification was inhibited by curved lines. Altogether these results indicated that intrinsic mechanical tensions occur during neuritic growth and that maximal tension was developed by the axon and expressed on straight trajectories. The strong inhibitory effect of curved lines on axon specification was further demonstrated by their ability to prevent formation of multiple axons normally induced by cytochalasin or taxol treatments. Finally we provided evidence that microtubules were involved in the tension-mediated axonal polarization, acting as curvature sensors during neuronal differentiation. Thus, biomechanics coupled to physical constraints might be the first level of regulation during neuronal development, primary to biochemical and guidance regulations

Measurement, modelling, and closed-loop control of crystal shape distribution: Literature review and future perspectives

Crystal morphology is known to be of great importance to the end-use properties of crystal products, and to affect down-stream processing such as filtration and drying. However, it has been previously regarded as too challenging to achieve automatic closed-loop control. Previous work has focused on controlling the crystal size distribution, where the size of a crystal is often defined as the diameter of a sphere that has the same volume as the crystal. This paper reviews the new advances in morphological population balance models for modelling and simulating the crystal shape distribution (CShD), measuring and estimating crystal facet growth kinetics, and two- and three-dimensional imaging for on-line characterisation of the crystal morphology and CShD. A framework is presented that integrates the various components to achieve the ultimate objective of model-based closed-loop control of the CShD. The knowledge gaps and challenges that require further research are also identified

Glycan-dependent binding of galectin-1 to neuropilin-1 promotes axonal regeneration after spinal cord injury

Following spinal cord injury (SCI), semaphorin 3A (Sema3A) prevents axonal regeneration through binding to the neuropilin-1 (NRP-1)/PlexinA4 receptor complex. Here, we show that galectin-1 (Gal-1), an endogenous glycan-binding protein, selectively bound to the NRP-1/PlexinA4 receptor complex in injured neurons through a glycan-dependent mechanism, interrupts the Sema3A pathway and contributes to axonal regeneration and locomotor recovery after SCI. Although both Gal-1 and its monomeric variant contribute to de-activation of microglia, only high concentrations of wild-type Gal-1 (which co-exists in a monomer-dimer equilibrium) bind to the NRP-1/PlexinA4 receptor complex and promote axonal regeneration. Our results show that Gal-1, mainly in its dimeric form, promotes functional recovery of spinal lesions by interfering with inhibitory signals triggered by Sema3A binding to NRP-1/PlexinA4 complex, supporting the use of this lectin for the treatment of SCI patients.Fil: Quintá, Héctor Ramiro. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Fisicoquímica Biológicas; ArgentinaFil: Pasquini, Juana Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Fisicoquímica Biológicas; ArgentinaFil: Rabinovich, Gabriel Adrian. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Biología y Medicina Experimental (i); Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales; ArgentinaFil: Pasquini, Laura Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Fisicoquímica Biológicas; Argentin

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead