Performance evaluation of a linear predictor frequency estimator for mobile flat fading wireless channels

A well known frequency estimation algorithm using the linear prediction method is analyzed for flat fading wireless channels. The estimator outputs are statistically analyzed and its jitter performances are compared with the non-fading case and the Cramer-Rao bound. We provide a closed form solution for the distribution and the variance of the frequency estimates under fading conditions by making valid assumptions. We also verify the theoretical model using simulations. Analysis shows that the variance of the estimates for flat fading channels reaches a threshold point and increasing the transmit power does not necessarily improve the performances any further

Techno-economic comparison of buildings acting as Single-Self Consumers or as energy community through multiple economic scenarios

The European Union has set ambitious targets to move towards a society with high penetration of renewable energy sources. In the forthcoming energy transition, Energy Communities (EC), i.e., legal entities where different actors, including citizens, cooperate in energy generation, storage and management, will play a crucial role. The present work simulates the energy flows and assesses the potential economic benefits of a cluster of buildings acting collectively as an energy community – a specific case study is set in northern Italy by comparing the EC performance with a configuration where customers act as Single Self-Consumers (SSCs). Pending the transposition of EU Directives to binding national laws, due by 2021, different supporting tariffs (economic scenarios) have been simulated in order to determine which scheme will support more effectively the integration of Energy Communities in the national energy market. Results show that ECs (i.e., customers acting collectively as energy prosumers) are able to accelerate the diffusion of building-integrated renewable energy sources (RES), resulting in higher overall self-consumption rates than SSCs. Self-consumed electricity generates savings on the energy bill of EC, and we calculated positive economic performance indicators for all the analysed economic scenarios. The sensitivity analysis carried out on system and transport charges of the electricity bill shows their remarkable impact on the economics making the EC less attractive for investors and citizens without proper supporting schemes

Preparation and Carbonization of Glucose and Pyromellitic Dianhydride Crosslinked Polymers

In this work, four types of nanosponges were prepared from pyromellitic dianhydride (PMDA) and D-glucose (GLU) with different molar ratios (1.5:1, 2:1, 2.5:1 and 3:1). The obtained PMDA/GLU nanosponges were then pyrolyzed at 800 °C for 30 min under N2 gas flow. The prepared polymeric nanosponges were investigated by FTIR spectroscopy, elemental and thermogravimetric analyses to unravel the role played by the different molar ratio of the precursors in the formation of the polymer. The pyrolyzed nanosponges were investigated by means of porosity measurements, X-ray diffraction analysis, Raman spectroscopy and high-resolution transmission electron microscopy. Notably, no significant correlation of the amounts of used precursors with the porous texture and structure was evidenced. The results corroborate that PMDA and GLU can be easily combined to prepare nanosponges and that the carbon materials produced by their pyrolysis can be associated with glassy carbons with a microporous texture and relatively high surface area. Such hard carbons can be easily obtained and shrewdly used to segregate relatively small molecules and organic contaminants; in this study methylene blue adsorption was investigated

Simultaneous Grafting of Poly(Acrylic Acid) and Poly(Ethylene Glycol) onto Chitosan using Gamma Radiation: Polymer Networks for Removal of Textile Dyes

Chitosan is a bio-based polyelectrolyte with high potential for wastewater treatment. Chitosan can remove anionic dyes by adsorption but it has low performance in the removal of cationic dyes. In this work, we report the synthesis of chitosan-based graft-copolymers using gamma radiation. Acrylic acid and poly(ethylene glycol) were grafted successfully onto chitosan applying a radiation dose of 12 kGy at a dose rate of 8 kGyh-1. The grafted-copolymers have improved adsorptive properties for the removal of basic dyes reaching a maximum adsorption capacity higher than 300 mgg-1. The Lanmguir’s isotherm model described satisfactorily the interaction between the grafted copolymers and basic dyes. Freundlich’s isotherm model described the adsorption of anionic dye acid orange 52. The grafted copolymers removed successfully textile dyes from wastewater of the dyeing process. The best results were obtained in the removal of direct and basic dyes. Further, poly(ethylene glycol) grafted on the copolymer conferred better swelling behavior making easy the separation of the adsorbent after dye removal. The results showed that the adsorbent materials synthesized by radiochemical graftcopolymerization are more efficient than the beads, composite materials, and blends of chitosan

Graft-Copolymerization of Acrylate Monomers onto Chitosan Induced by Gamma Radiation: Amphiphilic Polymers and Their Behavior at The Air-Water Interface

Graft polymerization induced by ionizing radiation is a powerful tool in materials science to modifying the physical properties of polymers. Chitosan is a biocompatible, biodegradable, antibacterial, and highly hydrophilic polysaccharide. In this work, we report the obtaining of amphiphilic polymers through graft polymerization of acrylic monomers (methyl acrylate, t-butyl acrylate, and hexyl acrylate) onto chitosan. The polymerization reaction was carried out by simultaneous irradiation of monomers and chitosan using a gamma radiation source of 60Co. The formation of Langmuir films of amphiphilic polymers was studied at the air-water interface through surface pressure versus main molecular area isotherms (Π-A) and hysteresis cycles of compression and decompression. Finally, it was analyzed the transferring of Langmuir films towards solid substrates to obtaining Langmuir-Blodgett films with potential application as an antibacterial coating. The microstructure of the Langmuir-Blodgett films was characterized by AFM microscopy observing a regular topography with roughness ranging between 0.53 and 0.6 μm

On the growth of perturbations in interacting dark energy and dark matter fluids

The covariant generalizations of the background dark sector coupling suggested in G. Mangano, G. Miele and V. Pettorino, Mod. Phys. Lett. A 18, 831 (2003) are considered. The evolution of perturbations is studied with detailed attention to interaction rate that is proportional to the product of dark matter and dark energy densities. It is shown that some classes of models with coupling of this type do not suffer from early time instabilities in strong coupling regime.Comment: 11 pages, 2 figures. v3: minor changes, typos fixe