Resonant plasma excitation by single-cycle THz pulses

In this paper, an alternative perspective for the generation of millimetric high-gradient resonant plasma waves is discussed. This method is based on the plasma-wave excitation by energetic single-cycle THz pulses whose temporal length is comparable to the plasma wavelength. The excitation regime discussed in this paper is the quasi-nonlinear regime that can be achieved when the normalized vector potential of the driving THz pulse is on the order of unity. To investigate this regime and determine the strength of the excited electric elds, a Particle-In-Cell (PIC) code has been used. It has been found that by exploiting THz pulses with characteristics currently available in laboratory, longitudinal electron plasma waves with electric gradients up to hundreds MV/m can be obtained. The mm-size nature of the resonant plasma wave can be of great utility for an acceleration scheme in which high-brightness electron bunches are injected into the wave to undergo a strong acceleration. The long-size nature of the acceleration bucket with respect to the short length of the electron bunches can be handled in a more robust manner in comparison with the case when micrometric waves are employed

Effect of Ferric Sodium EDTA administration, in combination with vitamin C, folic acid, copper gluconate, zinc gluconate and selenomethionine, on cardiovascular risk evaluation: exploration of the HRV frequency domain

diseases. Using the Heart Rate Variability (HRV) analysis is possible to provide an evaluation of the safety and the effectiveness of intervention. Objective: To evaluate the efficacy and safety of Ferric Sodium EDTA in combination with vitamin C, folic acid, copper gluconate, zinc gluconate and selenomethionine (Ferachel forte®) 2 tabs/day for 24 days in elderly patients with secondary anaemia, by exploring the HRV frequency domain. Methods: In 45 elderly patients with secondary anaemia and/or low-moderate kidney failure, laboratory values after administration of Ferric Sodium EDTA, 2 tabs a day, in combination with vitamin C, folic acid, copper gluconate, zinc gluconate and selenomethionine (Ferachel forte®) for 24 days (N=16 patients) or ferrous gluconate 63 mg/day added to saline solution, administered using intravenous access during the hospitalization period of 15 ± 5 days (N=29 patients) were evaluated. Also, ECG signals and bioelectrical impedance (BIA) were measured. Results: Oral iron supplementation with Ferric Sodium EDTA, in combination with vitamin C, folic acid, copper gluconate, zinc gluconate and selenomethionine (Ferachel forte®) confirmed to be effective and safe about the cardiovascular risk in old patients. This study showed the real superiority of the oral administration about the cardiovascular risk in elderly patients in comparison with intravenous administration of ferrous gluconate. Conclusion: This study confirms that Ferric Sodium EDTA combination (Ferachel forte®) can be a valid alternative to ferrous gluconate intravenous therapy (gold standard) in the treatment of secondary anaemia in elderly patients. In fact, during the treatment, efficacy results have been maintained without statistically significant variations about cardiovascular risk, evaluated by exploring the HRV frequency domain

Characterization of self-injected electron beams from LWFA experiments at SPARC_LAB

The plasma-based acceleration is an encouraging technique to overcome the limits of the accelerating gradient in the conventional RF acceleration. A plasma accelerator is able to provide accelerating fields up to hundreds of $GeV/m$, paving the way to accelerate particles to several MeV over a short distance (below the millimetre range). Here the characteristics of preliminary electron beams obtained with the self-injection mechanism produced with the FLAME high-power laser at the SPARC_LAB test facility are shown. In detail, with an energy laser on focus of $1.5\ J$ and a pulse temporal length (FWHM) of $40\ fs$, we obtained an electron plasma density due to laser ionization of about $6 \times 10^{18}\ cm^{-3}$, electron energy up to $350\ MeV$ and beam charge in the range $(50 - 100)\ pC$.Comment: 6 pages, 11 figures, conference EAAC201

Fracionamento de diferentes classes de compostos químicos por cromatografia líquida em coluna.

Resumo

Manejo dos resíduos da colheita de acácia-negra (Acacia mearnsii De Wild) e a sustentabilidade do sítio.

A acácia-negra se adapta a inúmeras condições ambientais por ser uma espécie pioneira de crescimento rápido. Este trabalho foi realizado em povoamentos comerciais puros de acácia-negra de propriedade da TANAGRO S.A., no município de Piratini, RS, em cinco classes de solos, com plantas de mesma procedência, constituindo cada qual um tratamento. Em cada solo, foram avaliados o crescimento em DAP, altura e produção de biomassa aérea. Os solos foram caracterizados química, física e morfologicamente em seus horizontes superficiais. Nas plantas, foram determinado o estado nutricional dos diferentes compartimentos, o teor de tanino na casca e o teor de lignina e extrativos totais no tronco. O Neossolo Litólico eutrófico produziu o maior volume de troncos comerciais, enquanto o Neossolo Litólico álico foi o menos produtivo, mostrando a grande importância da fertilidade do solo na produtividade da acácia negra, sobretudo, o teor de P e as saturações por bases e por alumínio trocável. Se os resíduos não forem queimados, a quantidade de macronutrientes devolvida ao solo (por galhos, flor, folhas e vagens) é maior que a quantidade de macronutrientes exportada, com a retirada apenas do tronco comercial e casca, nos solos menos produtivos, confirmando que se trata de espécie recuperadora de solo. Nos solos com maior volume de troncos comerciais produzidos, a quantidade de cálcio e magnésio exportada foi maior do que a devolvida ao solo pelos resíduos da colheita. A concentração de tanino na casca da acácia-negra fo

Methylene blue adsorption on thermo plasma expanded graphite in a multilayer column system

The removal of dyes from wastewater is an important topic in environmental applications. Methylene blue (MB) is one of the most worrisome compounds, as it is widespread and used in many industrial activities. Adsorption represents an effective technique for the removal of this contaminant. Thermo plasma expanded graphite (TPEG) is an industrial material characterized by a fibrous morphology, a very low density and overlapped graphene layers. TPEG has a higher specific surface compared to conventional thermo-expanded graphite and it can establish effective attractive forces with charged pollutants. These properties make TPEG a very promising adsorbent material. In the present work, TPEG was tested in an innovative multilayer column system to treat MB contaminated solutions. Several batch experiments were carried out by varying pH, initial MB concentration and temperature. The optimal adsorption performance was assessed at pH 11, around which the TPEG assumed the maximum negative charge. Based on these results, the adsorption mechanism appeared to be related mainly to electrostatic interactions. At room temperature, the greatest amount of MB adsorbed on TPEG was detected by treating solutions with an initial concentration of 30 mgMB/L. The temperature increase from 20 to 40 °C caused an enhanced adsorption capacity when concentrations higher than 10 mgMB/L were treated. The adsorption trends were accurately described by a pseudo-second order kinetic law and the adsorption isotherms at 20 and 40 °C were found to follow both the features of Freundlich and Langmuir models. The adsorption capacity was estimated to reach threshold values around 95 mgMB/gTPEG and 265 mgMB/gTPEG at 20 and 40°C, respectively. The Gibbs energy change (ΔG°) was calculated to about −7.80 kJ/mol, which proved that the process is spontaneous from a thermodynamic point of view. Finally, it was verified that TPEG can be efficiently reused 5 times after a simple chemical regeneration phase with HCl

Enhanced relativistic-electron beam collimation using two consecutive laser pulses

The double laser pulse approach to relativistic electron beam (REB) collimation has been investigated at the LULI-ELFIE facility. In this scheme, the magnetic field generated by the first laser-driven REB is used to guide a second delayed REB. We show how electron beam collimation can be controlled by properly adjusting laser parameters. By changing the ratio of focus size and the delay time between the two pulses we found a maximum of electron beam collimation clearly dependent on the focal spot size ratio of the two laser pulses and related to the magnetic field dynamics. Cu-K alpha and CTR imaging diagnostics were implemented to evaluate the collimation effects on the respectively low energy ( MeV) components of the REB

Produção de madeira, casca e tanino de Acacia mearnsii com sete anos, em solos derivados de micaxistos e arenito no município de Piratini, RS.

bitstream/CNPF-2009-09/30396/1/com_tec54.pd

Efeitos de sistemas de preparo do solo na erosão e na produtividade da acácia-negra (Acacia mearnsii De Wild.).

Os plantios homogêneos de acácia-negra nem sempre são feitos em solos adequados às exigências da espécie, seja pelo valor da terra ou proximidade da indústria. Diferentes sistemas de preparo podem melhorar as condições do solo, evitar problemas de erosão e diminuir custos de implantação. Em áreas de propriedade da TANAGRO S.A e da SETA S.A., nos municípios de Piratini e Butiá, RS, em dois tipos de solos distintos Neossolo Litólico e Argissolo Vermelho-Amarelo, foram testados sistemas de preparo do solo com diferentes níveis de movimentação para plantio de acácia-negra: plantio de mudas em covas e plantio após subsolagens com duas, três e cinco hastes e uso de gradagens. Foram avaliados o crescimento em DAP e altura, anualmente, e produção de biomassa aérea no corte raso. Os solos foram caracterizados química e fisicamente em seus horizontes superficiais. Nas plantas, após sete anos, foram coletadas amostras de discos em seis posições no tronco para avaliação das densidades básicas. Preparo do solo com subsolador de cinco hastes apresentou maiores perdas de solo, que foram mensuráveis apenas até 18 meses após o plantio. Essas perdas de solo são extremamente importantes na sustentabilidade da produção do Neossolo Litólico, composto em 80% de calhaus e cascalho. O preparo reduzido do solo, com a abertura de covas manual e mecanicamente para plantio da acácia negra, não diminuiu o crescimento das plantas em ambos os solos estudados. No entanto, o desenvolvimento inicial das plantas de acácia negra, plantadas em sistema de preparo reduzido, foi mais lento (altura e DAP), defasagem que permaneceu até os 24 meses após o plantio