Site-specific protein modification using immobilized sortase in batch and continuous-flow systems

Transpeptidation catalyzed by ​sortase A allows the preparation of proteins that are site-specifically and homogeneously modified with a wide variety of functional groups, such as fluorophores, PEG moieties, lipids, glycans, bio-orthogonal reactive groups and affinity handles. This protocol describes immobilization of ​sortase A on a solid support (Sepharose beads). Immobilization of ​sortase A simplifies downstream purification of a protein of interest after labeling of its N or C terminus. Smaller batch and larger-scale continuous-flow reactions require only a limited amount of enzyme. The immobilized enzyme can be reused for multiple cycles of protein modification reactions. The described protocol also works with a Ca²⁺-independent variant of ​sortase A with increased catalytic activity. This heptamutant variant of ​sortase A (7M) was generated by combining previously published mutations, and this immobilized enzyme can be used for the modification of calcium-senstive substrates or in instances in which low temperatures are needed. Preparation of immobilized ​sortase A takes 1–2 d. Batch reactions take 3–12 h and flow reactions proceed at 0.5 ml h⁻¹, depending on the geometry of the reactor used.United States. National Institutes of Health (RO1 AI087879

Ambulatory heart rate range predicts mode-specific mortality and hospitalisation in chronic heart failure

Objective: We aimed to define the prognostic value of the heart rate range during a 24 h period in patients with chronic heart failure (CHF). Methods: Prospective observational cohort study of 791 patients with CHF associated with left ventricular systolic dysfunction. Mode-specific mortality and hospitalisation were linked with ambulatory heart rate range (AHRR; calculated as maximum minus minimum heart rate using 24 h Holter monitor data, including paced and non-sinus complexes) in univariate and multivariate analyses. Findings were then corroborated in a validation cohort of 408 patients with CHF with preserved or reduced left ventricular ejection fraction. Results: After a mean 4.1 years of follow-up, increasing AHRR was associated with reduced risk of all-cause, sudden, non-cardiovascular and progressive heart failure death in univariate analyses. After accounting for characteristics that differed between groups above and below median AHRR using multivariate analysis, AHRR remained strongly associated with all-cause mortality (HR 0.991/bpm increase in AHRR (95% CI 0.999 to 0.982); p=0.046). AHRR was not associated with the risk of any non-elective hospitalisation, but was associated with heart-failure-related hospitalisation. AHRR was modestly associated with the SD of normal-to-normal beats (R2=0.2; p<0.001) and with peak exercise-test heart rate (R2=0.33; p<0.001). Analysis of the validation cohort revealed AHRR to be associated with all-cause and mode-specific death as described in the derivation cohort. Conclusions: AHRR is a novel and readily available prognosticator in patients with CHF, which may reflect autonomic tone and exercise capacity

Lessons learned from a living lab on the broad adoption of eHealth in primary health care

Background: Electronic health (eHealth) solutions are considered to relieve current and future pressure on the sustainability of primary health care systems. However, evidence of the effectiveness of eHealth in daily practice is missing. Furthermore, eHealth solutions are often not implemented structurally after a pilot phase, even if successful during this phase. Although many studies on barriers and facilitators were published in recent years, eHealth implementation still progresses only slowly. To further unravel the slow implementation process in primary health care and accelerate the implementation of eHealth, a 3-year Living Lab project was set up. In the Living Lab, called eLabEL, patients, health care professionals, small- and medium-sized enterprises (SMEs), and research institutes collaborated to select and integrate fully mature eHealth technologies for implementation in primary health care. Seven primary health care centers, 10 SMEs, and 4 research institutes participated. Objective: This viewpoint paper aims to show the process of adoption of eHealth in primary care from the perspective of different stakeholders in a qualitative way. We provide a real-world view on how such a process occurs, including successes and failures related to the different perspectives. Methods: Reflective and process-based notes from all meetings of the project partners, interview data, and data of focus groups were analyzed systematically using four theoretical models to study the adoption of eHealth in primary care. Results: The results showed that large-scale implementation of eHealth depends on the efforts of and interaction and collaboration among 4 groups of stakeholders: patients, health care professionals, SMEs, and those responsible for health care policy (health care insurers and policy makers). These stakeholders are all acting within their own contexts and with their own values and expectations. We experienced that patients reported expected benefits regarding the use of eHealth for self-management purposes, and health care professionals stressed the potential benefits of eHealth and were interested in using eHealth to distinguish themselves from other care organizations. In addition, eHealth entrepreneurs valued the collaboration among SMEs as they were not big enough to enter the health care market on their own and valued the collaboration with research institutes. Furthermore, health care insurers and policy makers shared the ambition and need for the development and implementation of an integrated eHealth infrastructure. Conclusions: For optimal and sustainable use of eHealth, patients should be actively involved, primary health care professionals need to be reinforced in their management, entrepreneurs should work closely with health care professionals and patients, and the government needs to focus on new health care models stimulating innovations. Only when all these parties act together, starting in local communities with a small range of eHealth tools, the potential of eHealth will be enforced

Differential Dynamics of Transposable Elements during Long-Term Diploidization of Nicotiana Section Repandae (Solanaceae) Allopolyploid Genomes

PubMed ID: 23185607This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

Interstellar Matter and the Boundary Conditions of the Heliosphere

The interstellar cloud surrounding the solar system regulates the galactic environment of the Sun, and determines the boundary conditions of the heliosphere. Both the Sun and interstellar clouds move through space, so these boundary conditions change with time. Data and theoretical models now support densities in the cloud surrounding the solar system of n(HI)=0.22+/-0.06 cm^-3, and n(e-)~0.1 cm-3, with larger values allowed for n(HI) by radiative transfer considerations. Ulysses and Extreme Ultraviolet Explorer satellite HeI data yield a cloud temperature of 6,400 K. Nearby interstellar gas appears to be structured and inhomogeneous. The interstellar gas in the Local Fluff cloud complex exhibits elemental abundance patterns in which refractory elements are enhanced over the depleted abundances found in cold disk gas. Within a few parsecs of the Sun, inconclusive evidence for factors of 2--5 variation in MgII and FeII gas phase abundances is found, providing evidence for variable grain destruction. Observations of the hydrogen pile-up at the nose of the heliosphere are consistent with a barely subsonic motion of the heliosphere with respect to the surrounding interstellar cloud. Uncertainties on the velocity vector of the cloud that surrounds the solar system indicate that it is uncertain as to whether the Sun and alpha Cen are or are not immersed in the same interstellar cloud.Comment: 24 pages 3 figure

Adaptive phenotypic plasticity in the Midas cichlid fish pharyngeal jaw and its relevance in adaptive radiation

Phenotypic evolution and its role in the diversification of organisms is a central topic in evolutionary biology. A neglected factor during the modern evolutionary synthesis, adaptive phenotypic plasticity, more recently attracted the attention of many evolutionary biologists and is now recognized as an important ingredient in both population persistence and diversification. The traits and directions in which an ancestral source population displays phenotypic plasticity might partly determine the trajectories in morphospace, which are accessible for an adaptive radiation, starting from the colonization of a novel environment. In the case of repeated colonizations of similar environments from the same source population this "flexible stem" hypothesis predicts similar phenotypes to arise in repeated subsequent radiations. The Midas Cichlid (Amphilophus spp.) in Nicaragua has radiated in parallel in several crater-lakes seeded by populations originating from the Nicaraguan Great Lakes. Here, we tested phenotypic plasticity in the pharyngeal jaw of Midas Cichlids. The pharyngeal jaw apparatus of cichlids, a second set of jaws functionally decoupled from the oral ones, is known to mediate ecological specialization and often differs strongly between sister-species. We performed a common garden experiment raising three groups of Midas cichlids on food differing in hardness and calcium content. Analyzing the lower pharyngeal jaw-bones we find significant differences between diet groups qualitatively resembling the differences found between specialized species. Observed differences in pharyngeal jaw expression between groups were attributable to the diet's mechanical resistance, whereas surplus calcium in the diet was not found to be of importance. The pharyngeal jaw apparatus of Midas Cichlids can be expressed plastically if stimulated mechanically during feeding. Since this trait is commonly differentiated - among other traits - between Midas Cichlid species, its plasticity might be an important factor in Midas Cichlid speciation. The prevalence of pharyngeal jaw differentiation across the Cichlidae further suggests that adaptive phenotypic plasticity in this trait could play an important role in cichlid speciation in general. We discuss several possibilities how the adaptive radiation of Midas Cichlids might have been influenced in this respect

Muscarinic receptor subtypes and signalling involved in the attenuation of isoprenaline-induced rat urinary bladder relaxation

β-Adrenoceptors are important mediators of smooth muscle relaxation in the urinary bladder, but the concomitant presence of a muscarinic agonist, e.g., carbachol, can attenuate relaxation responses by reducing potency and/or efficacy of β-adrenoceptor agonists such as isoprenaline. Therefore, the present study was designed to explore the subtypes and signalling pathways of muscarinic receptors involved in the attenuation of isoprenaline-induced isolated rat detrusor preparations using novel subtype-selective receptor ligands. In radioligand binding studies, we characterized BZI to be a M3-sparing muscarinic agonist, providing selective M2 stimulation in rat bladder, and THRX-182087 as a highly M2-selective antagonist. The use of BZI and of THRX-182087 in the presence of carbachol enabled experimental conditions with a selective stimulation of only M2 or M3 receptors, respectively. Confirming previous findings, carbachol attenuated isoprenaline-induced detrusor relaxation. M2-selective stimulation partly mimicked this attenuation, indicating that both M2 and M3 receptors are involved. During M3-selective stimulation, the attenuation of isoprenaline responses was reduced by the phospholipase C inhibitor U 73,122 but not by the protein kinase C inhibitor chelerythrine. We conclude that both M2 and M3 receptors contribute to attenuation of β-adrenoceptor-mediated relaxation of rat urinary bladder; the signal transduction pathway involved in the M3 component of this attenuation differs from that mediating direct contractile effects of M3 receptors

Dealing with Food and Eggs in Mouthbrooding Cichlids: Structural and Functional Trade-Offs in Fitness Related Traits

As in any vertebrate, heads of fishes are densely packed with functions. These functions often impose conflicting mechanical demands resulting in trade-offs in the species-specific phenotype. When phenotypical traits are linked to gender-specific parental behavior, we expect sexual differences in these trade-offs. This study aims to use mouthbrooding cichlids as an example to test hypotheses on evolutionary trade-offs between intricately linked traits that affect different aspects of fitness. We focused on the oral apparatus, which is not only equipped with features used to feed and breathe, but is also used for the incubation of eggs. We used this approach to study mouthbrooding as part of an integrated functional system with diverging performance requirements and to explore gender-specific selective environments within a species.Because cichlids are morphologically very diverse, we hypothesize that the implications of the added constraint of mouthbrooding will primarily depend on the dominant mode of feeding of the studied species. To test this, we compared the trade-off for two maternal mouthbrooding cichlid species: a "suction feeder" (Haplochromis piceatus) and a "biter" (H. fischeri). The comparison of morphology and performance of both species revealed clear interspecific and intersex differences. Our observation that females have larger heads was interpreted as a possible consequence of the fact that in both the studied species mouthbrooding is done by females only. As hypothesized, the observed sexual dimorphism in head shape is inferred as being suboptimal for some aspects of the feeding performance in each of the studied species. Our comparison also demonstrated that the suction feeding species had smaller egg clutches and more elongated eggs.Our findings support the hypothesis that there is a trade-off between mouthbrooding and feeding performance in the two studied haplochromine cichlids, stressing the importance of including species-specific information at the gender level when addressing interspecific functional/morphological differences

A Cost-Effective ELP-Intein Coupling System for Recombinant Protein Purification from Plant Production Platform

BACKGROUND: Plant bioreactor offers an efficient and economical system for large-scale production of recombinant proteins. However, high cost and difficulty in scaling-up of downstream purification of the target protein, particularly the common involvement of affinity chromatography and protease in the purification process, has hampered its industrial scale application, therefore a cost-effective and easily scale-up purification method is highly desirable for further development of plant bioreactor. METHODOLOGY/PRINCIPAL FINDINGS: To tackle this problem, we investigated the ELP-intein coupling system for purification of recombinant proteins expressed in transgenic plants using a plant lectin (PAL) with anti-tumor bioactivity as example target protein and rice seeds as production platform. Results showed that ELP-intein-PAL (EiP) fusion protein formed novel irregular ER-derived protein bodies in endosperm cells by retention of endogenous prolamins. The fusion protein was partially self-cleaved in vivo, but only self-cleaved PAL protein was detected in total seed protein sample and deposited in protein storage vacuoles (PSV). The in vivo uncleaved EiP protein was accumulated up to 2-4.2% of the total seed protein. The target PAL protein could be purified by the ELP-intein system efficiently without using complicated instruments and expensive chemicals, and the yield of pure PAL protein by the current method was up to 1.1 mg/g total seed protein. CONCLUSION/SIGNIFICANCE: This study successfully demonstrated the purification of an example recombinant protein from rice seeds by the ELP-intein system. The whole purification procedure can be easily scaled up for industrial production, providing the first evidence on applying the ELP-intein coupling system to achieve cost-effective purification of recombinant proteins expressed in plant bioreactors and its possible application in industry