Exploring MAORY performances through tolerance analysis

n/

Active Optics Control of the VST Telescope with the CAN Field-Bus

The VST (VLT Survey Telescope) is a 2.6 m class Alt-Az telescope to be installed at Mount Paranal in the Atacama desert, Chile, in the European Southern Observatory (ESO) site. The VST is a wide-field imaging facility planned to supply databases for the ESO Very Large Telescope (VLT) science and carry out stand-alone observations in the UV to I spectral range. This paper will focus on the distributed control system of active optics based on CAN bus and PIC microcontrollers. Both axial and radial pads of the primary mirror will be equipped by astatic lever supports controlled by microcontroller units. The same CAN bus + microcontroller boards approach will be used for the temperature acquisition modules...

MicroMED: a dust particle counter for the characterization of airborne dust close to the surface of Mars

Monitoring of airborne dust is very important in planetary climatology. Indeed, dust absorbs and scatter solar and thermal radiation, severely affecting atmospheric thermal structure, balance and dynamics (in terms of circulations). Wind-driven blowing of sand and dust is also responsible for shaping planetary surfaces through the formation of sand dunes and ripples, the erosion of rocks, and the creation and transport of soil particles. Dust is permanently present in the atmosphere of Mars and its amount varies with seasons. During regional or global dust storms, more than 80% of the incoming sunlight is absorbed by dust causing an intense atmospheric heating. Airborne dust is therefore a crucial climate component on Mars which impacts atmospheric circulations at all scales. Main dust parameters influencing the atmosphere heating are size distribution, abundance, albedo, single scattering phase function, imaginary part of the index of refraction. Moreover, major improvements of Mars climate models require, in addition to the standard meteorological parameters, quantitative information about dust lifting, transport and removal mechanisms. In this context, two major quantities need to be measured for the dust source to be understood: surface flux and granulometry. While many observations have constrained the size distribution of the dust haze seen from the orbit, it is still not known what the primary airborne dust (e.g. the recently lifted dust) is made of, size-wise. MicroMED has been designed to fill this gap. It will measure the abundance and size distribution of dust, not in the atmospheric column, but close to the surface, where dust is lifted, so to be able to monitor dust injection into the atmosphere. This has never been performed in Mars and other planets exploration. MicroMED is an Optical Particle Counter, analyzing light scattered from single dust particles to measure their size and abundance. A proper fluid-dynamic system, including a pump and a sampling head, allows the sampling of Martian atmosphere with embedded dust. The captured dust grains are detected by an Optical System and then ejected into the atmosphere. MicroMED is a miniaturization of the instrument MEDUSA, developed for the Humboldt payload of the ExoMars mission. An Elegant Breadboard has been developed and tested and successfully demonstrates the instrument performances. The design and performance test results will be discussed

MicroMED: an optical particle counter for the direct in situ measurement of abundance and size distribution of dust suspended in the atmosphere of Mars

The MicroMED experiment has been developed for the characterization of airborne dust close to the surface of Mars and is suitable to be accommodated on Martian landers or rovers. It is an optical particle counter, analyzing light scattered from single dust particles to measure their size and abundance. An Elegant Breadboard of the instrument has been realized and successfully tested in a Martian simulated environment. Test results demonstrate the expected functionality and performances of the experiment. <P /

The numerical simulation tool for the MAORY multiconjugate adaptive optics system

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.Comment: 6 pages, 1 figure, Proceeding 9909 310 of the conference SPIE Astronomical Telescopes + Instrumentation 2016, 26 June 1 July 2016 Edinburgh, Scotland, U

Organization, management and risk analysis of the MAORY project

In this paper we present the structure, organization and risk management of the MAORY Consortium, an Italian-French collaboration for the design and construction of the adaptive optics module for the European Large Telescope

CFD analysis and optimization of the sensor “MicroMED” for the ExoMars 2020 mission

Characterization of dust is a key aspect in recent space missions to Mars. Dust has a huge influence on the planet's global climate and it is always present in its atmosphere. MicroMED is an optical particle counter that will be part of the "Dust Complex" suite led by IKI in the ExoMars 2020 mission and it will determine size distribution and concentration of mineral grains suspended in martian atmosphere. A Computational Fluid Dynamic (CFD) analysis was performed aimed at the optimization of the instrument's sampling efficiency in the 0.4-20 μm diameter range of the dust particles. The analysis allowed to understand which conditions are optimum for operations on Mars and to consequently optimize the instrument's fluid dynamic design

LO WFS of MAORY: performance and sky coverage assessment

MAORY is the Multi-Conjugate Adaptive Optics module for the European ELT. It will provide a wide-field correction for the first-light instrument MICADO. The Low-Order wavefront modes will be sensed on 3 Natural Guide Stars with Shack-Hartmann Wavefront Sensors, so-called the LO WFS. In the presented work, we focus on the numerical study of the main aspects that depend on the LO WFS design and operational use: low-order sensing performance and sky coverage

MAORY requirements flow down and technical budgets

MAORY is the ELT-MCAO system providing first-light wide-field correction for the near infrared imager and spectrograph MICADO. This paper provides an overview of the systems engineering processes and tools implemented to MAORY project during preliminary design phase and it illustrates, with some practical examples, the role of MAORY technical budgets to derive requirements on subsystems. One of the critical activities in systems engineering is the requirements managing. In line with this, the MAORY team devotes a significant effort to this activity, which follows a well-established process. This involves the MAORY requirements break-down to subsystems level and from here down to subsystems procurements specifications. This paper also presents an overview of the MAORY Technical Budgets. One task of the System Engineering is to manage the technical budgets at system level combining the contributors at subsystems level to meet the overall requirements