Porosity of temporary denture soft liners containing antifungal agents

ABSTRACT Incorporation of antifungals in temporary denture soft liners has been recommended for denture stomatitis treatment; however, it may affect their properties. Objective: To evaluate the porosity of a tissue conditioner (Softone) and a temporary resilient liner (Trusoft) modified by minimum inhibitory concentrations (MICs) of antifungal agents for Candida albicans biofilm. Material and Methods: The porosity was measured by water absorption, based on exclusion of the plasticizer effect. Initially, it was determined by sorption isotherms that the adequate storage solution for specimens (65×10×3.3 mm) of both materials was 50% anhydrous calcium chloride (S50). Then, the porosity factor (PF) was calculated for the study groups (n=10) formed by specimens without (control) or with drug incorporation at MICs (nystatin: Ny-0.032 g, chlorhexidine diacetate: Chx-0.064 g, or ketoconazole: Ke-0.128 g each per gram of soft liner powder) after storage in distilled water or S50 for 24 h, seven and 14 d. Data were statistically analyzed by 4-way repeated measures ANOVA and Tukey's test (&#945;=.05). Results: Ke resulted in no significant changes in PF for both liners in water over 14 days (p>0.05). Compared with the controls, Softone and Trusoft PFs were increased at 14-day water immersion only after addition of Ny and Chx, and Chx, respectively (p<0.05). Both materials showed no significant changes in PF in up to 14 days of S50 immersion, compared with the controls (p>0.05). In all experimental conditions, Softone and Trusoft PFs were significantly lower when immersed in S50 compared with distilled water (p<0.05). Conclusions: The addition of antifungals at MICs resulted in no harmful effects for the porosity of both temporary soft liners in different periods of water immersion, except for Chx and Ny in Softone and Chx in Trusoft at 14 days. No deleterious effect was observed for the porosity of both soft liners modified by the drugs at MICs over 14 days of S50 immersion

Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing

Purpose: The aim of this study was to evaluate linear dimensional alterations of artificial teeth for complete dentures when using different investment and flasking techniques. Background: Dimensional changes in the vertical dimension may occur owing to changes in artificial teeth positioning caused by different investing and flasking techniques. Materials and methods: Thirty pairs of the complete dentures were manufactured and randomly divided into three groups (n = 10): (1) invested with type III stone in monomaxillary PVC flask; (2) invested with type III stone in bimaxillary PVC flask; and (3) invested with laboratory silicone in bimaxillary PVC flask. Dentures were polymerised by microwave, and 12 linear distances were measured before and after denture processing. Data were analysed by one-way ANOVA, considering manufacturing technique as the study factor. Tukey's HSD was used as post hoc ANOVA (p = 0.05). Results: Most of the linear distances were comparable for all groups. All transversal maxillary and mandibular distances were higher for group 1 compared with groups 2 and 3 (p < 0.05), except the distance 3-6 for mandibular arch, in which no difference was found between groups (p < 0.05). Both maxillary diagonal distances were higher in group 1 (p < 0.05), and no differences were found among all groups for mandibular measurements. Conclusions: Double flasking technique independent on the investment material is shown to be the most effective method to reduce changes in artificial teeth positioning.292E435E43

Association of matrix metalloproteinase gene polymorphism with temporomandibular joint degeneration

Temporomandibular joint (TMJ) degeneration is a frequent cause of orofacial pain. Matrix metalloproteinases (MMPs) degrade extracellular matrix components and play an important role in TMJ degeneration. We investigated the frequency of the MMP1 1G/2G polymorphism (rs1799750), the MMP3 5A/6A polymorphism (rs3025058), and the MMP9 C/T polymorphism (rs3918242) in individuals with TMJ degeneration, in order to analyze the association of polymorphisms in these genes with TMJ degeneration. The population studied comprised 117 healthy controls and 115 individuals diagnosed with TMJ degeneration upon examination of magnetic resonance imaging (MRI) and computed tomography (CT) images. Genotypes were determined using PCR restriction fragment length polymorphism (RFLP). Logistic regression analyses revealed an association between the MMP1 2G/2G genotype and degeneration; in contrast, there was no association between either the MMP3 or the MMP9 genotype and degeneration. Our results may indicate a role for the MMP1 polymorphism in TMJ degeneration.11911

Low back pain

Low back pain affects individuals of all ages and is a leading contributor to disease burden worldwide. Despite advancements in assessment and treatment methods, the management of low back pain remains a challenge for researchers and clinicians alike. One reason for the limited success in identifying effective treatments is the large variation in the manifestations, possible causes, precipitating and maintaining factors, course, prognosis and consequences in terms of activity interference and quality of life. However, despite these challenges, steady progress has been achieved in the understanding of back pain, and important steps in the understanding of the psychological and social risk factors, genetics and brain mechanisms of low back pain have been made. These new findings have given impetus to the development of new diagnostic procedures, evidence-based screening methods and more targeted interventions, which underscore the need for a multidisciplinary approach to the management of low back pain that integrates biological, psychological and social aspects.status: publishe

GWAS Identifies New Loci for Painful Temporomandibular Disorder: Hispanic Community Health Study/Study of Latinos.

Temporomandibular disorder (TMD) is a musculoskeletal condition characterized by pain and reduced function in the temporomandibular joint and/or associated masticatory musculature. Prevalence in the United States is 5% and twice as high among women as men. We conducted a discovery genome-wide association study (GWAS) of TMD in 10,153 participants (769 cases, 9,384 controls) of the US Hispanic Community Health Study/Study of Latinos (HCHS/SOL). The most promising single-nucleotide polymorphisms (SNPs) were tested in meta-analysis of 4 independent cohorts. One replication cohort was from the United States, and the others were from Germany, Finland, and Brazil, totaling 1,911 TMD cases and 6,903 controls. A locus near the sarcoglycan alpha ( SGCA), rs4794106, was suggestive in the discovery analysis ( P = 2.6 × 10(6)) and replicated (i.e., 1-tailed P = 0.016) in the Brazilian cohort. In the discovery cohort, sex-stratified analysis identified 2 additional genome-wide significant loci in females. One lying upstream of the relaxin/insulin-like family peptide receptor 2 ( RXP2) (chromosome 13, rs60249166, odds ratio [OR] = 0.65, P = 3.6 × 10(-8)) was replicated among females in the meta-analysis (1-tailed P = 0.052). The other (chromosome 17, rs1531554, OR = 0.68, P = 2.9 × 10(-8)) was replicated among females (1-tailed P = 0.002), as well as replicated in meta-analysis of both sexes (1-tailed P = 0.021). A novel locus at genome-wide level of significance (rs73460075, OR = 0.56, P = 3.8 × 10(-8)) in the intron of the dystrophin gene DMD (X chromosome), and a suggestive locus on chromosome 7 (rs73271865, P = 2.9 × 10(-7)) upstream of the Sp4 Transcription Factor ( SP4) gene were identified in the discovery cohort, but neither of these was replicated. The SGCA gene encodes SGCA, which is involved in the cellular structure of muscle fibers and, along with DMD, forms part of the dystrophin-glycoprotein complex. Functional annotation suggested that several of these variants reside in loci that regulate processes relevant to TMD pathobiologic processes

The role of polymerization cycle and post-pressing time on tooth movement in complete dentures

This study analyzed the influence of polymerization cycle and post-pressing time on tooth movement in complete dentures. Forty maxillary complete dentures were fabricated and randomly assigned to 8 groups (n = 5); the polymerization cycle (conventional long cycle in water bath, fast cycle in boiling water, and by microwave energy) and the post-pressing time (immediate and 6 hours) were varied. Metal reference pins were placed on the incisal border of the central incisors (RI and LI), on the buccal cusp of the first premolars (RP and LP), and on the mesiobuccal cusp of the second molars (RM and LM). Two transverse and 2 anteroposterior distances were measured with a linear optical microscope (Olympus Optical Co., Tokyo, Japan) with an accuracy of .0005 mm, before and after processing the complete dentures. The data collected were submitted to analysis of variance (ANOVA) and the Tukey Test at a significance level of 5%. When Clássico, a conventional heat-polymerizable acrylic resin, was polymerized by microwave energy, tooth movement was statistically significant for 2 distances, with the highest value being observed for the 6-hour post-pressing time. Onda-Cryl microwave acrylic resin processed by microwave energy presented the lowest tooth movement for 2 distances, considering the 6-hour post-pressing time. QC-20 acrylic resin presented no statistically significant change considering both post-pressing times in each distance evaluated. Tooth movement showed an asymmetric behavior, so the mastering of the processing method is essential to the precise execution of all laboratory steps, irrespective of the polymerization cycle and post-pressing time used