315 research outputs found
Free convective controls on sequestration of salts into low-permeability strata: insights from sand tank laboratory experiments and numerical modelling
Using sand tank experiments and numerical models, local-scale solute-transport processes associated with free convection in both the region surrounding as well as within discrete low-permeability strata are explored. Different permeability geometries and contrasts between high- and low-permeability regions are tested. Results show that two free convective processes occur at different spatial and temporal scales. In the high-permeability region, salinisation was rapid and occurred predominantly by free convective flow around the low-permeability blocks (interlayer convection). A free convection flow field also became concurrently established within the low-permeability lenses (intralayer convection). It was found that upward vertical flow created by the large-scale interlayer free-convective flow field in the high-permeability region retards salinisation of the lenses as buoyant freshwater displacements oppose the downward penetration of dissolved salts. Salinisation of the low-permeability structures eventually takes place from below as saltwater is dragged upwards. This bottom up convective salinisation process of low permeability strata has not been reported in previous literature. These results demonstrate that variable-density sequestration of solutes driven by a source resident above the low-permeability layer is a complicated function of the geometry of the permeability distribution and the permeability contrast between low- and high-permeability regions. © 2009 Springer-Verlag
Topped MAC with extra dimensions?
We perform the most attractive channel (MAC) analysis in the top mode
standard model with TeV-scale extra dimensions, where the standard model gauge
bosons and the third generation of quarks and leptons are put in D(=6,8,10,...)
dimensions. In such a model, bulk gauge couplings rapidly grow in the
ultraviolet region. In order to make the scenario viable, only the attractive
force of the top condensate should exceed the critical coupling, while other
channels such as the bottom and tau condensates should not. We then find that
the top condensate can be the MAC for D=8, whereas the tau condensation is
favored for D=6. The analysis for D=10 strongly depends on the regularization
scheme. We predict masses of the top (m_t) and the Higgs (m_H), m_t=172-175 GeV
and m_H=176-188 GeV for D=8, based on the renormalization group for the top
Yukawa and Higgs quartic couplings with the compositeness conditions at the
scale where the bulk top condenses. The Higgs boson in such a characteristic
mass range will be immediately discovered in H -> WW^(*)/ZZ^(*) once the LHC
starts.Comment: REVTEX4, 24 pages, 21 figures, to appear in PRD. The title is changed
in PRD. One reference added, typos correcte
Top quark associated production of topcolor pions at hadron colliders
We investigate the associated production of a neutral physical pion with top
quarks in the context of topcolor assisted technicolor. We find that single-top
associated production does not yield viable rates at either the Tevatron or
LHC. tt-associated production at the Tevatron is suppressed relative to
Standard Model ttH, but at the LHC is strongly enhanced and would allow for
easy observation of the main decay channels to bottom quarks, and possible
observation of the decay to gluons.Comment: 13 pages, 4 figures, submitted to PR
Flavour Universal Dynamical Electroweak Symmetry Breaking
The top condensate see-saw mechanism of Dobrescu and Hill allows electroweak
symmetry to be broken while deferring the problem of flavour to an electroweak
singlet, massive sector. We provide an extended version of the singlet sector
that naturally accommodates realistic masses for all the standard model
fermions, which play an equal role in breaking electroweak symmetry. The models
result in a relatively light composite Higgs sector with masses typically in
the range of (400-700)~GeV. In more complete models the dynamics will
presumably be driven by a broken gauged family or flavour symmetry group. As an
example of the higher scale dynamics a fully dynamical model of the quark
sector with a GIM mechanism is presented, based on an earlier top condensation
model of King using broken family gauge symmetry interactions (that model was
itself based on a technicolour model of Georgi). The crucial extra ingredient
is a reinterpretation of the condensates that form when several gauge groups
become strong close to the same scale. A related technicolour model of Randall
which naturally includes the leptons too may also be adapted to this scenario.
We discuss the low energy constraints on the massive gauge bosons and scalars
of these models as well as their phenomenology at the TeV scale.Comment: 22 pages, 3 fig
Dynamical chiral symmetry breaking in gauge theories with extra dimensions
We investigate dynamical chiral symmetry breaking in vector-like gauge
theories in dimensions with () compactified extra dimensions, based on
the gap equation (Schwinger-Dyson equation) and the effective potential for the
bulk gauge theories within the improved ladder approximation. The non-local
gauge fixing method is adopted so as to keep the ladder approximation
consistent with the Ward-Takahashi identities.
Using the one-loop gauge coupling of the truncated KK
effective theory which has a nontrivial ultraviolet fixed point (UV-FP)
for the (dimensionless) bulk gauge coupling , we find that there
exists a critical number of flavors, ( for
for SU(3) gauge theory): For , the dynamical
chiral symmetry breaking takes place not only in the ``strong-coupling phase''
() but also in the ``weak-coupling phase'' ()
when the cutoff is large enough. For , on the other hand,
only the strong-coupling phase is a broken phase and we can formally define a
continuum (infinite cutoff) limit, so that the physics is insensitive to the
cutoff in this case.
We also perform a similar analysis using the one-loop ``effective gauge
coupling''. We find the turns out to be a value similar to
that of the case, notwithstanding the enhancement of the
coupling compared with that of the .Comment: REVTEX4, 38 pages, 18 figures. The abstract is shortened; version to
be published in Phys. Rev.
Lepton flavor violation decays in the topcolor-assisted technicolor model and the littlest Higgs model with parity
The new particles predicted by the topcolor-assisted technicolor ()
model and the littlest Higgs model with T-parity (called model) can
induce the lepton flavor violation () couplings at tree level or one loop
level, which might generate large contributions to some processes. Taking
into account the constraints of the experimental data on the relevant free
parameters, we calculate the branching ratios of the decay processes
with = , and
in the context of these two kinds of new physics models. We find
that the model and the model can indeed produce significant
contributions to some of these decay processes.Comment: 24 pages, 7 figure
Plastic Flow in Two-Dimensional Solids
A time-dependent Ginzburg-Landau model of plastic deformation in
two-dimensional solids is presented. The fundamental dynamic variables are the
displacement field \bi u and the lattice velocity {\bi v}=\p {\bi u}/\p t.
Damping is assumed to arise from the shear viscosity in the momentum equation.
The elastic energy density is a periodic function of the shear and tetragonal
strains, which enables formation of slips at large strains. In this work we
neglect defects such as vacancies, interstitials, or grain boundaries. The
simplest slip consists of two edge dislocations with opposite Burgers vectors.
The formation energy of a slip is minimized if its orientation is parallel or
perpendicular to the flow in simple shear deformation and if it makes angles of
with respect to the stretched direction in uniaxial stretching.
High-density dislocations produced in plastic flow do not disappear even if
the flow is stopped. Thus large applied strains give rise to metastable,
structurally disordered states. We divide the elastic energy into an elastic
part due to affine deformation and a defect part. The latter represents degree
of disorder and is nearly constant in plastic flow under cyclic straining.Comment: 16pages, Figures can be obtained at
http://stat.scphys.kyoto-u.ac.jp/index-e.htm
Correlated evolution of multivariate traits: detecting co-divergence across multiple dimensions
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/75039/1/j.1420-9101.2007.01415.x.pd
Minimal Composite Higgs Model with Light Bosons
We analyze a composite Higgs model with the minimal content that allows a
light Standard-Model-like Higgs boson, potentially just above the current LEP
limit. The Higgs boson is a bound state made up of the top quark and a heavy
vector-like quark. The model predicts that only one other bound state may be
lighter than the electroweak scale, namely a CP-odd neutral scalar. Several
other composite scalars are expected to have masses in the TeV range. If the
Higgs decay into a pair of CP-odd scalars is kinematically open, then this
decay mode is dominant, with important implications for Higgs searches. The
lower bound on the CP-odd scalar mass is loose, in some cases as low as
100 MeV, being set only by astrophysical constraints.Comment: 33 pages, latex. Corrections in eqs. 3.21, 3.23, 4.1, 4.5-10. One
figure adde
Single Top Production as a Window to Physics Beyond the Standard Model
Production of single top quarks at a high energy hadron collider is studied
as a means to identify physics beyond the standard model related to the
electroweak symmetry breaking. The sensitivity of the -channel mode,
the -channel -gluon fusion mode, and the \tw mode to various possible
forms of new physics is assessed, and it is found that the three modes are
sensitive to different forms of new physics, indicating that they provide
complimentary information about the properties of the top quark. Polarization
observables are also considered, and found to provide potentially useful
information about the structure of the interactions of top.Comment: References added and minor discussion improvements; results
unchanged; Version to be published in PR
- âŠ