High intrinsic energy resolution photon number resolving detectors

Transition Edge Sensors (TESs) are characterized by the intrinsic figure of merit to resolve both the energy and the statistical distribution of the incident photons. These properties lead TES devices to become the best single photon detector for quantum technology experiments. For a TES based on titanium and gold has been reached, at telecommunication wavelength, an unprecedented intrinsic energy resolution (0.113 eV). The uncertainties analysis of both energy resolution and photon state assignment has been discussed. The thermal properties of the superconductive device have been studied by fitting the bias curve to evaluate theoretical limit of the energy resolution

Single-photon light detection with transition-edge sensors

Transition-Edge Sensors (TESs) are microcalorimeters that measure the energy of incident single photons by the resistance increase of a superconducting film biased within the superconducting-to-normal transition. TES are able to detect single photons from IR to X-ray with an intrinsic energy resolution and photon-number discrimination capability. Metrology, astronomy and quantum communication are the fields where these properties can be particularly useful. In this work, we report about characterization of different TESs based on Ti films. Single photons have been detected from 200nm to 800 nm working at transition temperature Tc ∼ 100 mK. Using a pulsed laser at 690nm we have demonstrated the capability to resolve up to five photons

Graphene edge method for three-dimensional probing of Raman microscopes focal volumes

In this work, a layer of graphene was used as a standard material for the measurement of the dimensions of Raman microscopes focal volumes of different confocal Raman spectrometers equipped with different objectives and excitation laser wavelengths. This method consists in probing the volume near the focal point of the system by using a flat graphene monolayer sheet with a straight edge. Graphene was selected because of its high Raman cross section and mechanically and chemically stability, allowing fast measurements and easy manipulation. In this paper, a method to employ graphene to accurately and precisely measure the three dimensions of the focal volume of a Raman microscope is presented; scanning along the axial and lateral directions, it is possible to reconstruct the three dimensions of the focal volume. Furthermore, these operations can be combined in a single procedure which allows the measurement of projections of the volume on planes parallel to the optical axis. Knowledge of these parameters enable absolute quantification of Raman-active molecules and support high-resolution Raman imaging

E-beam evaporated ZnO thin films: Fabrication and characterization as UV detector

partially_open5In the present paper, fabrication and structural, optical and electrical characterization of ZnO thin films grown by electron gun technique are reported and the performances of a prototype of UV photodetector based on them are illustrated. ZnO thin films, fabricated on sapphire by e-beam evaporation followed by a two-step ex situ treatment (annealing and oxidation), are polycrystalline, with a smooth surface and show very good visible transparency and an energy gap of 3.2 eV. Preliminary results on fabrication and characterization of an UV detector are reported. The Al interdigitated contacts show a Schottky behavior, which is strongly desired in view of applications since it has many advantages in the aspects of high quantum efficiency, response time, low dark current, high UV/visible contrast and possible zero-bias operation.partially_openPortesi C; Lolli L; Taralli E; Rajteri M; Monticone EPortesi, Chiara; Lolli, L; Taralli, Emanuele; Rajteri, Mauro; Monticone, Eugeni

State-dependent Jastrow correlation functions for 4He nuclei

We calculate the ground-state energy for the nucleus 4He with V4 nucleon interactions, making use of a Jastrow description of the corresponding wavefunction with state-dependent correlation factors. The effect related to the state dependence of the correlation is quite important, lowering the upper bound for the ground-state energy by some 2 MeV.Comment: 10 pages, REVTeX, to be published in J. Phys. G: Nucl. Part. Phy

Graphene edge method for three-dimensional probing of Raman microscopes focal volumes

In this work, a layer of graphene was used as a standard material for the measurement of the dimensions of Raman microscopes focal volumes of different confocal Raman spectrometers equipped with different objectives and excitation laser wavelengths. This method consists in probing the volume near the focal point of the system by using a flat graphene monolayer sheet with a straight edge. Graphene was selected because of its high Raman cross section and mechanically and chemically stability, allowing fast measurements and easy manipulation. In this paper, a method to employ graphene to accurately and precisely measure the three dimensions of the focal volume of a Raman microscope is presented; scanning along the axial and lateral directions, it is possible to reconstruct the three dimensions of the focal volume. Furthermore, these operations can be combined in a single procedure which allows the measurement of projections of the volume on planes parallel to the optical axis. Knowledge of these parameters enable absolute quantification of Raman-active molecules and support high-resolution Raman imaging

Control of bulk superconductivity in a BCS superconductor by surface charge doping via electrochemical gating

The electrochemical gating technique is a powerful tool to tune the surface conduction properties of various materials by means of pure charge doping, but its efficiency is thought to be hampered in materials with a good electronic screening. We show that, if applied to a metallic superconductor (NbN thin films), this approach allows observing reversible enhancements or suppressions of the bulk superconducting transition temperature, which vary with the thickness of the films. These results are interpreted in terms of proximity effect, and indicate that the effective screening length depends on the induced charge density, becoming much larger than that predicted by standard screening theory at very high electric fields

Self consistent, absolute calibration technique for photon number resolving detectors

Well characterized photon number resolving detectors are a requirement for many applications ranging from quantum information and quantum metrology to the foundations of quantum mechanics. This prompts the necessity for reliable calibration techniques at the single photon level. In this paper we propose an innovative absolute calibration technique for photon number resolving detectors, using a pulsed heralded photon source based on parametric down conversion. The technique, being absolute, does not require reference standards and is independent upon the performances of the heralding detector. The method provides the results of quantum efficiency for the heralded detector as a function of detected photon numbers. Furthermore, we prove its validity by performing the calibration of a Transition Edge Sensor based detector, a real photon number resolving detector that has recently demonstrated its effectiveness in various quantum information protocols.Comment: 9 pages, 2 figure

Characterisation of Refined Marc Distillates with Alternative Oak Products Using Different Analytical Approaches

The use of oak barrel alternatives, including oak chips, oak staves and oak powder, is quite common in the production of spirits obtained from the distillation of vegetal fermented products such as grape pomace. This work explored the use of unconventional wood formats such as peeled and sliced wood. The use of poplar wood was also evaluated to verify its technological uses to produce aged spirits. To this aim, GC-MS analyses were carried out to obtain an aromatic characterisation of experimental distillates treated with these products. Moreover, the same spirits were studied for classification purposes using NMR, NIR and e-nose. A significant change in the original composition of grape pomace distillate due to sorption phenomena was observed; the intensity of this effect was greater for poplar wood. The release of aroma compounds from wood depended both on the toasting level and wood assortment. Higher levels of xylovolatiles, namely, whisky lactone, were measured in samples aged using sliced woods. Both the NIR and NMR analyses highlighted similarities among samples refined with oak tablets, differentiating them from the other wood types. Finally, E-nose seemed to be a promising alternative to spectroscopic methods both for the simplicity of sample preparation and method portability

Effective gap at microwave frequencies in MgB2 thin films with strong interband scattering

The microwave properties of polycrystalline MgB2 thin films prepared by the so-called in-situ method are investigated. The characterization of the films at microwave frequencies was obtained by a coplanar resonator technique. The analysis of the experimental data results in the determination of penetration depth, surface impedance and complex conductivity. The aim of this work is to set the experimental results in a consistent framework, involving the two-band model in the presence of impurity scattering. The energy gaps are calculated and the contribution of intra- and inter-band scattering is considered. From the comparison between the calculated gap values and the experimental data it turns out that the temperature dependence of the penetration depth can be accounted for by an effective mean energy gap, in agreement with the predictions of Kogan et al. [Phys. Rev. B 69, 132506 (2004)]. On the other hand, the temperature dependence of the real part of the microwave conductivity and of the surface resistance is accounted for by the single smaller gap, in agreement with the work of Jin et al. [Phys. Rev. Lett. 91, 127006 (2003)]. Since these findings rely on the same calculated gap structure, the required consistency is fulfilled.Comment: 24 pages, 9 figures. Phys. Rev. B, in pres