44 research outputs found
Quasiparticle Generation-Recombination Noise in the Limit of Low Detector Volume
We have measured the quasiparticle generation-recombination (GR) noise in
aluminium lumped element kinetic inductors with a wide range of detector
volumes at various temperatures. The basic detector consists of meandering
inductor and interdigitated capacitor fingers. The inductor volume is varied
from 2 to 153 {\mu}m^{3} by changing the inductor width and length to maintain
a constant inductance. We started with measuring the power spectrum density
(PSD) of the detectors frequency noise which is a function of GR noise and we
clearly observed the spectrum roll off at 10 kHz which corresponds to the
quasiparticle lifetime. Using data from a temperature sweep of the resonator
frequency we convert the frequency fluctuation to quasiparticle fluctuation and
observe its strong dependence on detector volume: detectors with smaller volume
display less quasiparticle noise amplitude. Meanwhile we observe a saturated
quasiparticle density at low temperature from all detectors as the
quasiparticle life time {\tau}qp approaches a constant value at low
temperature
Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Mapping
Line Intensity Mapping (LIM) is a new observational technique that uses
low-resolution observations of line emission to efficiently trace the
large-scale structure of the Universe out to high redshift. Common mm/sub-mm
emission lines are accessible from ground-based observatories, and the
requirements on the detectors for LIM at mm-wavelengths are well matched to the
capabilities of large-format arrays of superconducting sensors. We describe the
development of an R = 300 on-chip superconducting filter-bank spectrometer
covering the 120--180 GHz band optimized for future mm-LIM experiments,
focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope.
Radiation is coupled from the telescope optical system to the spectrometer chip
via an array of feedhorn-coupled orthomode transducers. Superconducting
microstrip transmission lines then carry the signal to an array of channelizing
half-wavelength resonators, and the output of each spectral channel is sensed
by a lumped element kinetic inductance detector (leKID). Key areas of
development include incorporating new low-loss dielectrics to improve both the
achievable spectral resolution and optical efficiency and development of a
robust fabrication process to create a galvanic connection between ultra-pure
superconducting thin-films to realize multi-material (hybrid) leKIDs. We
provide an overview of the spectrometer design, fabrication process, and
prototype devices.Comment: 7 pages, 7 figures, presented at 2022 Applied Superconductivity
Conferenc
Noise optimization for MKIDs with different design geometries and material selections
The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielectric layer, the generation-recombination noise intrinsic to the superconducting thin-film, and system white noise from each detector noise power spectrum and characterize how these noise components depend on detector geometry, material, and measurement conditions such as driving power and temperature. We observe a reduction in the amplitude of two-level system noise with both an elevated sample temperature and an increased gap between the fingers within the interdigitated capacitors for both aluminum and niobium detectors. We also verify the expected reduction of the generation-recombination noise and associated quasiparticle lifetime with reduced inductor volume. This study also iterates over different materials, including aluminum, niobium, and aluminum manganese, and compares the results with an underlying physical model
A Measurement of the CMB Temperature Power Spectrum and Constraints on Cosmology from the SPT-3G 2018 TT/TE/EE Data Set
We present a sample-variance-limited measurement of the temperature power
spectrum () of the cosmic microwave background (CMB) using observations of
a field made by SPT-3G in 2018. We report
multifrequency power spectrum measurements at 95, 150, and 220GHz covering the
angular multipole range . We combine this
measurement with the published polarization power spectrum measurements from
the 2018 observing season and update their associated covariance matrix to
complete the SPT-3G 2018 data set. This is the first analysis to
present cosmological constraints from SPT , , and power spectrum
measurements jointly. We blind the cosmological results and subject the data
set to a series of consistency tests at the power spectrum and parameter level.
We find excellent agreement between frequencies and spectrum types and our
results are robust to the modeling of astrophysical foregrounds. We report
results for CDM and a series of extensions, drawing on the following
parameters: the amplitude of the gravitational lensing effect on primary power
spectra , the effective number of neutrino species
, the primordial helium abundance , and the
baryon clumping factor due to primordial magnetic fields . We find that the
SPT-3G 2018 data are well fit by CDM with a
probability-to-exceed of . For CDM, we constrain the expansion
rate today to and the
combined structure growth parameter to . The SPT-based
results are effectively independent of Planck, and the cosmological parameter
constraints from either data set are within of each other.
(abridged)Comment: 35 Pages, 17 Figures, 11 Table
Measurement of the mean central optical depth of galaxy clusters via the pairwise kinematic Sunyaev-Zel'dovich effect with SPT-3G and des
We infer the mean optical depth of a sample of optically selected galaxy clusters from the Dark Energy Survey via the pairwise kinematic Sunyaev-Zel'dovich (KSZ) effect. The pairwise KSZ signal between pairs of clusters drawn from the Dark Energy Survey Year-3 cluster catalog is detected at 4.1σ in cosmic microwave background temperature maps from two years of observations with the SPT-3G camera on the South Pole Telescope. After cuts, there are 24,580 clusters in the ∼1,400 deg2 of the southern sky observed by both experiments. We infer the mean optical depth of the cluster sample with two techniques. The optical depth inferred from the pairwise KSZ signal is τ¯e=(2.97±0.73)×10-3, while that inferred from the thermal SZ signal is τ¯e=(2.51±0.55stat±0.15syst)×10-3. The two measures agree at 0.6σ. We perform a suite of systematic checks to test the robustness of the analysis
The Design and Integrated Performance of SPT-3G
SPT-3G is the third survey receiver operating on the South Pole Telescope
dedicated to high-resolution observations of the cosmic microwave background
(CMB). Sensitive measurements of the temperature and polarization anisotropies
of the CMB provide a powerful dataset for constraining cosmology. Additionally,
CMB surveys with arcminute-scale resolution are capable of detecting galaxy
clusters, millimeter-wave bright galaxies, and a variety of transient
phenomena. The SPT-3G instrument provides a significant improvement in mapping
speed over its predecessors, SPT-SZ and SPTpol. The broadband optics design of
the instrument achieves a 430 mm diameter image plane across observing bands of
95 GHz, 150 GHz, and 220 GHz, with 1.2 arcmin FWHM beam response at 150 GHz. In
the receiver, this image plane is populated with 2690 dual-polarization,
tri-chroic pixels (~16000 detectors) read out using a 68X digital
frequency-domain multiplexing readout system. In 2018, SPT-3G began a multiyear
survey of 1500 deg of the southern sky. We summarize the unique optical,
cryogenic, detector, and readout technologies employed in SPT-3G, and we report
on the integrated performance of the instrument.Comment: 25 pages, 11 figures. Submitted to ApJ
Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model
The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems, and identify two previously uncharacterized contributions to readout noise. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G, and suggest improvements to the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope
A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data
We present a measurement of gravitational lensing over 1500 deg of the
Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The
lensing amplitude relative to a fiducial Planck 2018 CDM cosmology is
found to be , excluding instrumental and astrophysical
systematic uncertainties. We conduct extensive systematic and null tests to
check the robustness of the lensing measurements, and report a minimum-variance
combined lensing power spectrum over angular multipoles of , which
we use to constrain cosmological models. When analyzed alone and jointly with
primary cosmic microwave background (CMB) spectra within the CDM
model, our lensing amplitude measurements are consistent with measurements from
SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon
density and other parameters including uncertainties on a foreground bias
template, we obtain a constraint on using the SPT-3G 2018 lensing data alone, where
is a common measure of the amplitude of structure today and
is the matter density parameter. Combining SPT-3G 2018 lensing
measurements with baryon acoustic oscillation (BAO) data, we derive parameter
constraints of , , and Hubble constant
km s Mpc. Using CMB anisotropy and lensing measurements from
SPT-3G only, we provide independent constraints on the spatial curvature of
(95% C.L.) and the dark energy density
of (68% C.L.). When combining SPT-3G
lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on
the sum of the neutrino masses of eV (95% C.L.)