9,283 research outputs found
The solar power satellite concepts: The past decade and the next decade
Results of studies on the solar power satellite concept are summarized. The basic advantages are near continuous access to sunlight and freedom from atmospheric effects and cloud cover. The systems definition studies consider photovoltaic and thermal energy conversion systems and find both to be technically feasible, with the photovoltaic approach preferred. A microwave test program is under way which will provide quantitative data on critical parameters, including beam forming and steering accuracy. Ballistic and winged launch vehicles are defined for the transportation of construction materials, with the shuttle expected to provide low cost transportation to and from space. A reference system is outlined for evaluating the concept in terms of environmental and other considerations. Preliminary estimates of natural resource requirements and energy payback intervals are encouraging
Solar Power Satellites
A satellite based energy concept is described, including the advantages of the basic concept, system characteristics, cost, and environmental considerations. An outline of a plan for the further evaluation and implementation of the system is given. It is concluded that the satellite concept is competitive with other advanced power generation systems when a variety of factors are considered, including technical feasibility, cost, safety, natural resources, environment, baseload capability, location flexibility, land use, and existing industrial base for implementation
Big Bang Nucleosynthesis and the Missing Hydrogen Mass in the Universe
It is proposed that when the era of the big-bang nucleosynthesis ended,
almost all of the 75 percent of the observed total baryonic matter remained in
the form of hydrogen and continued to exist in the form of protons and
electrons. They are present today as baryonic dark matter in the form of
intergalactic hydrogen plasma. To test our hypothesis we have investigated the
effects of Thomson scattering by free electrons on the reported dimming of Type
Ia supernovae. The quantitative results of our calculation suggest that the
dimming of these supernovae, which are dimmer than expected and hence more
distant than predicted by Hubble expansion, is a result of Thomson scattering
without cosmic acceleration.Comment: A typographical error in equation (7) page 3 has been correcte
Spatially resolved photo ionization of ultracold atoms on an atom chip
We report on photo ionization of ultracold magnetically trapped Rb atoms on
an atom chip. The atoms are trapped at 5 K in a strongly anisotropic
trap. Through a hole in the chip with a diameter of 150 m two laser beams
are focussed onto a fraction of the atomic cloud. A first laser beam with a
wavelength of 778 nm excites the atoms via a two photon transition to the 5D
level. With a fiber laser at 1080 nm the excited atoms are photo ionized.
Ionization leads to depletion of the atomic density distribution observed by
absorption imaging. The resonant ionization spectrum is reported. The setup
used in this experiment is not only suitable to investigate BEC ion mixtures
but also single atom detection on an atom chip
Preliminary Study of Advanced Turboprops for Low Energy Consumption
The fuel savings potential of advanced turboprops (operational about 1985) was calculated and compared with that of an advanced turbofan for use in an advanced subsonic transport. At the design point, altitude 10.67 km and Mach 0.80, turbine-inlet temperature was fixed at 1590 K while overall pressure ratio was varied from 25 to 50. The regenerative turboprop had a pressure ratio of only 10 and an 85 percent effective rotary heat exchanger. Variable camber propellers were used with an efficiency of 85 percent. The study indicated a fuel savings of 33 percent, a takeoff gross weight reduction of 15 percent, and a direct operating cost reduction of 18 percent was possible when turboprops were used instead of the reference turbofan at a range of 10 200 km. These reductions were 28, 11, and 14 percent, respectively, at a range of 5500 km. Increasing overall pressure ratio from 25 to 50 saved little fuel and slightly increased takeoff gross weight
Turbofan aft duct suppressor study program listing and user's guide
A description of the structure of the Annular Flow Duct Program (AFDP) for the calculation of acoustic suppression due to treatment in a finite length annular duct carrying sheared flow is presented. Although most appropriate for engine exhaust ducts, this program can be used to study sound propagation in any duct that maintains annular geometry over a considerable length of the duct. The program is based on the modal analysis of sound propagation in ducts with axial segments of different wall impedances. For specified duct geometry, wall impedance, flow and acoustic conditions in the duct (including mode amplitude distribution of the source) and duct termination reflection characteristics, the program calculates the suppression due to the treatment in the duct. The presence of forward and backward traveling modes in the duct due to the reflection and redistribution of modes at segment interfaces and duct end terminations are taken into account in the calculations. The effects of thin wall boundary layers (with a linear or mean flow velocity profile) on the acoustic propagation are also included in the program. A functional description of the major subroutines is included and a sample run is provided with an explanation of the output
Preliminary Evaluation of a Turbine/Rotary Combustion Compound Engine for a Subsonic Transport
The fuel consumption of a modern compound engine with that of an advanced high pressure ratio turbofan was compared. The compound engine was derived from a turbofan engine by replacing the combustor with a rotary combustion (RC) engine. A number of boost pressure ratios and compression ratios were examined. Cooling of the RC engine was accomplished by heat exchanging to the fan duct. Performance was estimated with an Otto-cycle for two levels of energy lost to cooling. The effects of added complexity on cost and maintainability were not examined and the comparison was solely in terms of cruise performance and weight. Assuming a 25 percent Otto-cycle cooling loss (representative of current experience), the best compound engine gave a 1.2 percent improvement in cruise. Engine weight increased by 23 percent. For a 10 percent Otto-cycle cooling loss (representing advanced insulation/high temperature materials technology), a compound engine with a boost PR of 10 and a compression ratio of 10 gave an 8.1 percent lower cruise than the reference turbofan
Virtual testing environment tools for railway vehicle certification
This paper describes the work performed in Work Package 6 of the European project DynoTRAIN. Its task was to investigate the effects that uncertainties present within the track and running conditions have on the simulated behaviour of a railway vehicle. Methodologies and frameworks for using virtual simulation and statistical tools, in order to reduce both the cost and time required for the certification of new or modified railway vehicles, were proposed. In particular, the project developed a virtual test track (VTT) toolkit that is capable of both generating a series of test tracks based on measurements, which can be used in vehicle virtual testing using computer simulation models, and also automatically handling the output results. The toolkit is compliant with prEN14363: 2013. The VTT was used as an experimental tool to analyse cross-correlations between track data (input) and matching vehicle response (output) based on data recorded using a test train. This paper discusses the issues encountered in the process and suggests avenues for future developments and potential use in the context of European cross-acceptance. The VTT offers benefits to the areas of design development and regulatory certification
In situ TEM study of twin boundary migration in sub-micron Be fibers
Deformation twinning in hexagonal crystals is often considered as a way to
palliate the lack of independent slip systems. This mechanism might be either
exacerbated or shut down in small-scale crystals whose mechanical behavior can
significantly deviate from bulk materials. Here, we show that sub-micron
beryllium fibers initially free of dislocation and tensile tested in-situ in a
transmission electron microscope (TEM) deform by a twin thickening. The propagation speed of the twin boundary
seems to be entirely controlled by the nucleation of twinning dislocations
directly from the surface. The shear produced is in agreement with the repeated
lateral motion of twinning dislocations. We demonstrate that the activation
volume () associated with the twin boundary propagation can be retrieved
from the measure of the twin boundary speed as the stress decreases as in a
classical relaxation mechanical test. The value of is comparable to the value expected from surface
nucleation.Comment: 13 pages, 9 figure
- …