Temperature dependence of Mott transition in VO_2 and programmable critical temperature sensor

The temperature dependence of the Mott metal-insulator transition (MIT) is studied with a VO_2-based two-terminal device. When a constant voltage is applied to the device, an abrupt current jump is observed with temperature. With increasing applied voltages, the transition temperature of the MIT current jump decreases. We find a monoclinic and electronically correlated metal (MCM) phase between the abrupt current jump and the structural phase transition (SPT). After the transition from insulator to metal, a linear increase in current (or conductivity) is shown with temperature until the current becomes a constant maximum value above T_{SPT}=68^oC. The SPT is confirmed by micro-Raman spectroscopy measurements. Optical microscopy analysis reveals the absence of the local current path in micro scale in the VO_2 device. The current uniformly flows throughout the surface of the VO_2 film when the MIT occurs. This device can be used as a programmable critical temperature sensor.Comment: 4 pages, 3 figure

High glucose induces MCP-1 expression partly via tyrosine kinase–AP-1 pathway in peritoneal mesothelial cells

High glucose induces MCP-1 expression partly via tyrosine kinase–AP-1 pathway in peritoneal mesothelial cells.BackgroundHigh glucose in peritoneal dialysis solutions has been implicated in the pathogenesis of peritoneal fibrosis in chronic ambulatory peritoneal dialysis (CAPD) patients. However, the mechanisms are not very clear. Peritoneal macrophages seem to participate in the process of peritoneal fibrosis and monocyte chemoattractant protein-1 (MCP-1) plays a key role in the recruitment of monocytes toward the peritoneal cavity. However, little is known about the effect of high glucose on MCP-1 expression and its signal transduction pathway in human peritoneal mesothelial cells.MethodsMesothelial cells were cultured with glucose (5 to 100 mmol/L) or mannitol chronically for up to seven days. MCP-1 expression of mRNA and protein was measured by Northern blot analysis and enzyme-linked immunosorbent assay (ELISA). Chemotactic activity of high-glucose–conditioned culture supernatant was measured by chemotactic assay. To examine the roles of the transcription factors activator protein-1 (AP-1) and nuclear factor-κB (NF-κB), electrophoretic mobility shift assay (EMSA) was performed.ResultsGlucose induced MCP-1 mRNA expression in a time- and dose-dependent manner. MCP-1 protein in cell culture supernant was also increased. Equivalent concentrations of mannitol had no significant effect. High-glucose–conditioned supernatant possessed an increased chemotactic activity for monocytes, which was neutralized by anti–MCP-1 antibody. EMSA revealed that glucose increased the AP-1 binding activity in a time- and dose-dependent manner, but not NF-κB. Curcumin, an inhibitor of AP-1, dose-dependently suppressed the induction of MCP-1 mRNA by high glucose. Tyrosine kinase inhibitors such as genistein (12.5 to 50 μmol/L) and herbimycin A (0.1 to 1 μmol/L) inhibited the high-glucose–induced MCP-1 mRNA expression in a dose-dependent manner, and also suppressed the high-glucose–induced AP-1 binding activity.ConclusionsHigh glucose induced mesothelial MCP-1 expression partly via the tyrosine kinase-AP-1 pathway

Algae–bacteria interactions: Evolution, ecology and emerging applications

AbstractAlgae and bacteria have coexisted ever since the early stages of evolution. This coevolution has revolutionized life on earth in many aspects. Algae and bacteria together influence ecosystems as varied as deep seas to lichens and represent all conceivable modes of interactions — from mutualism to parasitism. Several studies have shown that algae and bacteria synergistically affect each other's physiology and metabolism, a classic case being algae–roseobacter interaction. These interactions are ubiquitous and define the primary productivity in most ecosystems. In recent years, algae have received much attention for industrial exploitation but their interaction with bacteria is often considered a contamination during commercialization. A few recent studies have shown that bacteria not only enhance algal growth but also help in flocculation, both essential processes in algal biotechnology. Hence, there is a need to understand these interactions from an evolutionary and ecological standpoint, and integrate this understanding for industrial use. Here we reflect on the diversity of such relationships and their associated mechanisms, as well as the habitats that they mutually influence. This review also outlines the role of these interactions in key evolutionary events such as endosymbiosis, besides their ecological role in biogeochemical cycles. Finally, we focus on extending such studies on algal–bacterial interactions to various environmental and bio-technological applications

Association between Estimated Pulse Wave Velocity and Incident Nonalcoholic Fatty Liver Disease in Korean Adults

Introduction: Nonalcoholic fatty liver disease (NAFLD) is associated with vascular dysfunction, one of the signs of which is arterial stiffness. Carotid-femoral pulse wave velocity (PWV), which is considered the gold standard measure of arterial stiffness, can be estimated using two commonly assessed clinical variables: age and blood pressure. This study aimed to evaluate the association between estimated PWV (ePWV) and the prevalence and incidence of NAFLD among Korean adults. Methods: This study used data from the Ansan-Ansung cohort study, a subset of the Korean Genome and Epidemiology Study, and included 8,336 adult participants with and without NAFLD at baseline. The participants were subdivided into three tertile groups according to ePWV. Results: At baseline, the prevalence of NAFLD was 10.5, 27.5, and 35.0% in the first (lowest), second, and third (highest) tertiles of ePWV, respectively. During the 18-year follow-up period, 2,467 (42.9%) incident cases of NAFLD were identified among 5,755 participants who did not have NAFLD at baseline. After adjustment for clinically relevant variables, participants in the second (adjusted hazard ratio [HR], 1.25; 95% confidence interval [CI], 1.12–1.40) and third (adjusted HR, 1.42; 95% CI, 1.24–1.64) tertiles of ePWV had a significantly higher risk of incident NAFLD than those in the first tertile. Conclusion: Higher ePWV is independently associated with an elevated risk of NAFLD in the general population

Physical properties of transparent perovskite oxides (Ba,La)SnO3 with high electrical mobility at room temperature

Transparent electronic materials are increasingly in demand for a variety of optoelectronic applications. BaSnO3 is a semiconducting oxide with a large band gap of more than 3.1 eV. Recently, we discovered that La doped BaSnO3 exhibits unusually high electrical mobility of 320 cm^2(Vs)^-1 at room temperature and superior thermal stability at high temperatures [H. J. Kim et al. Appl. Phys. Express. 5, 061102 (2012)]. Following that work, we report various physical properties of (Ba,La)SnO3 single crystals and films including temperature-dependent transport and phonon properties, optical properties and first-principles calculations. We find that almost doping-independent mobility of 200-300 cm^2(Vs)^-1 is realized in the single crystals in a broad doping range from 1.0x10^19 to 4.0x10^20 cm^-3. Moreover, the conductivity of ~10^4 ohm^-1cm^-1 reached at the latter carrier density is comparable to the highest value. We attribute the high mobility to several physical properties of (Ba,La)SnO3: a small effective mass coming from the ideal Sn-O-Sn bonding, small disorder effects due to the doping away from the SnO2 conduction channel, and reduced carrier scattering due to the high dielectric constant. The observation of a reduced mobility of ~70 cm^2(Vs)^-1 in the film is mainly attributed to additional carrier-scatterings which are presumably created by the lattice mismatch between the substrate SrTiO3 and (Ba,La)SnO3. The main optical gap of (Ba,La)SnO3 single crystals remained at about 3.33 eV and the in-gap states only slightly increased, thus maintaining optical transparency in the visible region. Based on these, we suggest that the doped BaSnO3 system holds great potential for realizing all perovskite-based, transparent high-frequency high-power functional devices as well as highly mobile two-dimensional electron gas via interface control of heterostructured films.Comment: 31 pages, 7 figure

Observation of First-Order Metal-Insulator Transition without Structural Phase Transition in VO_2

An abrupt first-order metal-insulator transition (MIT) without structural phase transition is first observed by current-voltage measurements and micro-Raman scattering experiments, when a DC electric field is applied to a Mott insulator VO_2 based two-terminal device. An abrupt current jump is measured at a critical electric field. The Raman-shift frequency and the bandwidth of the most predominant Raman-active A_g mode, excited by the electric field, do not change through the abrupt MIT, while, they, excited by temperature, pronouncedly soften and damp (structural MIT), respectively. This structural MIT is found to occur secondarily.Comment: 4 pages, 4 figure

Comparison of postoperative changes in the distal and proximal segments between conventional and sliding mini-plate fixation following mandibular setback

The purpose of the present study was to evaluate the postoperative three-dimensional (3D) changes in the proximal segments after mandibular setback sagittal split ramus osteotomy and to compare the changes between the conventional mini-plate fixation and semi-rigid sliding plate fixation