High resolution shadow mask patterning in deep holes and its application to an electrical wafer feed-through

The paper presents a technique to pattern materials in deep holes and/or on non-planar substrate surfaces. A rather old technique, namely, electron-beam evaporation of metals through a shadow mask, is used. The realization of high-resolution shadow masks using micromachining techniques is described. Further, a low ohmic electrical wafer foed-through with a small parasitic capacitance to the substrate and a high placing density is presented

Miniaturised friction force measuring system for tribological research on magnetic storage devices

In this paper a silicon head slider suspension with integrated piezoresistive friction force sensors is presented. This device can be used for tribological research on magnetic rigid disk storage devices. Both the tangential and radial friction forces between the slider and disk, as well as a friction induced moment, can be measured simultaneously. Furthermore the normal load on the head slider can be measured. The paper focusses on design considerations and the realisation process of the suspension. Friction measurements are included to illustrate the feasibility of the system

Correcting respirable photometric particulate measurements using a gravimetric sampling method

According to the National Environmental Management: Air Quality Act of 2004 people have the right to clean air and a healthy environment. Particulate matter (PM) emissions pose a significant health threat. Both indoor and ambient air pollution contribute to the burden of disease associated with poor air quality. This is particularly true within the South African setting where low income households make use of different solid fuels for heating and cooking purposes resulting in high levels of PM emissions. This paper focuses on the evaluation mass concentration measurements recorded by continuous photometric PM instruments within KwaDela, a low income settlement in Mpumalanga located on the South African Highveld. Thus, obtaining a photometric calibration factor for both the DustTrak Model 8530 and the SidePak AM510. Sampling took place during August 2014 for a period of seven days. The photometric and gravimetric instruments were collocated within the indoor environment of selected households. These instruments were all fitted with 10mm Dorr-Oliver Cyclone inlets to obtain the respirable (PM4) cut-point. The study found that both instruments tend to overestimate the indoor particulate mass concentrations when compared to the reference gravimetric method. The estimated photometric calibration factors for the DustTrak Model 8530 and SidePak AM510 are 0.14 (95%Cl: 0.09, 0.15) and 0.24 (95%Cl: 0.16, 0.30) respectively. The overestimation of the photometric measurements is rather significant. It is therefore important that the correction factors are applied to data collected in indoor environments prone to the combustion of solid fuels. The correction factors obtained from this and other studies vary as a result of the environment (ambient, indoor etc.) as well as the aerosol size fraction and the origin thereof. Thus, it is important to considered site specific calibration factors when implementing these photometric light-scattering instruments

Indoor and outdoor particulate matter concentrations on the Mpumalanga highveld – A case study

The household combustion of solid fuels, for the purpose of heating and cooking, is an activity practiced by many people in South Africa. Air pollution caused by the combustion of solid fuels in households has a significant influence on public health. People mostaffected are those considered to be the poorest, living in low-income settlements, where burning solid fuel is the primary source of energy. Insufficient data has been collected in South Africa to quantify the concentrations of particulate emissions that peopleare exposed to, especially the respirable fraction, associated with the combustion of solid fuels. The aim of this paper is to gain an understanding of the particulate matter (PM) concentrations a person living in a typical household in a low income settlement in theSouth African Highveld is exposed to. It also seeks to demonstrate that the use of solid fuels in the household can lead to indoor air pollution concentrations reaching levels very similar to ambient PM concentrations, which could be well in excess of the NationalAmbient Air Quality Standards, representing a major national public health threat. A mobile monitoring station was used in KwaDela, Mpumalanga to measure both ambient particulate concentrations and meteorological conditions, while a range of dust/particulate monitors were used for indoor and personal particulate concentration measurements. Indoor and personal measurements are limited to the respirable fraction (PM4) as this fraction contributes significantly to the negative health impacts. The sampling for this case study took place from 7-19 August 2014. Highest particulate matter concentrations were evident during the early mornings and the early evenings, when solid fuel burning activities were at their highest. Indoor and personal daily average PM4 concentrations did not exceed the 24h National Ambient PM2.5 Standard of 65 μg/m3 nor did they exceed the 24h National Ambient PM10 Standard of 75 μg/ m3. The outdoor PM2.5 concentrations were found to be below the standards for the duration of the sampling period. The outdoor PM10 concentrations exceeded the standards for one day during the sampling period. Results indicate that, although people in KwaDelamay be exposed to ambient PM concentrations that can be non-compliant to ambient standards, the exposure to indoor air, where solid fuel is burnt, may be detrimental to their health

proovframe: frameshift-correction for long-read (meta)genomics

Long-read sequencing technologies hold big promises for the genomic analysis of complex samples such as microbial communities. Yet, despite improving accuracy, basic gene prediction on long-read data is still often impaired by frameshifts resulting from small indels. Consensus polishing using either complementary short reads or to a lesser extent the long reads themselves can mitigate this effect but requires universally high sequencing depth, which is difficult to achieve in complex samples where the majority of community members are rare. Here we present proovframe, a software implementing an alternative approach to overcome frameshift errors in long-read assemblies and raw long reads. We utilize protein-to-nucleotide alignments against reference databases to pinpoint indels in contigs or reads and correct them by deleting or inserting 1-2 bases, thereby conservatively restoring reading-frame fidelity in aligned regions. Using simulated and real-world benchmark data we show that proovframe performs comparably to short-read-based polishing on assembled data, works well with remote protein homologs, and can even be applied to raw reads directly. Together, our results demonstrate that protein-guided frameshift correction significantly improves the analyzability of long-read data both in combination with and as an alternative to common polishing strategies. Proovframe is available from https://github.com/thackl/proovframe

The Asymptotic distribution of circles in the orbits of Kleinian groups

Let P be a locally finite circle packing in the plane invariant under a non-elementary Kleinian group Gamma and with finitely many Gamma-orbits. When Gamma is geometrically finite, we construct an explicit Borel measure on the plane which describes the asymptotic distribution of small circles in P, assuming that either the critical exponent of Gamma is strictly bigger than 1 or P does not contain an infinite bouquet of tangent circles glued at a parabolic fixed point of Gamma. Our construction also works for P invariant under a geometrically infinite group Gamma, provided Gamma admits a finite Bowen-Margulis-Sullivan measure and the Gamma-skinning size of P is finite. Some concrete circle packings to which our result applies include Apollonian circle packings, Sierpinski curves, Schottky dances, etc.Comment: 31 pages, 8 figures. Final version. To appear in Inventiones Mat

SPIDER: Probing the Early Universe with a Suborbital Polarimeter

We evaluate the ability of SPIDER, a balloon-borne polarimeter, to detect a divergence-free polarization pattern ("B-modes") in the Cosmic Microwave Background (CMB). In the inflationary scenario, the amplitude of this signal is proportional to that of the primordial scalar perturbations through the tensor-to-scalar ratio r. We show that the expected level of systematic error in the SPIDER instrument is significantly below the amplitude of an interesting cosmological signal with r=0.03. We present a scanning strategy that enables us to minimize uncertainty in the reconstruction of the Stokes parameters used to characterize the CMB, while accessing a relatively wide range of angular scales. Evaluating the amplitude of the polarized Galactic emission in the SPIDER field, we conclude that the polarized emission from interstellar dust is as bright or brighter than the cosmological signal at all SPIDER frequencies (90 GHz, 150 GHz, and 280 GHz), a situation similar to that found in the "Southern Hole." We show that two ~20-day flights of the SPIDER instrument can constrain the amplitude of the B-mode signal to r<0.03 (99% CL) even when foreground contamination is taken into account. In the absence of foregrounds, the same limit can be reached after one 20-day flight.Comment: 29 pages, 8 figures, 4 tables; v2: matches published version, flight schedule updated, two typos fixed in Table 2, references and minor clarifications added, results unchange

Healthy environments for athleTes (HEAT) : environmental conditions along a 90 km ultra-marathon event, South Africa

DATA AVAILABILITY : Data is available on request to the corresponding author and on agreement by all partner institutions.SUPPLEMENTARY INFORMATION : FIGURE S1. Google Earth image outlining the design of the vegetation survey used at the Comrades Halfway point at Drummond. Transect lines radiating outwards from the central spore trap location are indicated in red and follow the compass points. The south transect (S) extended the full 100 m, however the remaining three transects were truncated due to property boundaries curtailing access.This paper provides an overview of the HEAT (Healthy Environments for AthleTes) project, which aims to understand the impact of environmental conditions on athlete health and performance during major sporting events such as long-distance running, cycling, and triathlons. In collaboration with the SAFER (Strategies to reduce Adverse medical events For the ExerciseR) initiative, the HEAT project carried out a field campaign at the 2022 Comrades Marathon in the KwaZulu-Natal province of South Africa. The measurement campaign deployed seven weather stations, seven PM2.5 monitors and one spore trap along the 90 km route to capture spatially representative measurements of complex micro-climates, allergenic aerospora, and particulate matter exposure. The results indicate that runners were exposed to moderate risk heat stress conditions. Novel findings from this initial campaign shows elevated and potentially harmful PM2.5 levels at spectator areas, possibly coinciding with small fire events around the race day festivities. Our findings show values PM2.5 levels over the WHO 24-h guidelines at all stations, while 2000 µg/m3 at two stations. However, the lack of an acute exposure standard means direct health impacts cannot be quantified in the context of a sport event. The HEAT project highlights important aspects of race day monitoring; regional scale climatology has an impact on the race day conditions, the microclimatic conditions (pollution and meteorology) are not necessarily captured by proximity instruments and direct environmental measurements are required to accurately capture conditions along the route.Open access funding provided by North-West University.https://www.springer.com/journal/484hj2024Sports MedicineSDG-03:Good heatlh and well-beingSDG-13:Climate actio

'Education, education, education' : legal, moral and clinical

This article brings together Professor Donald Nicolson's intellectual interest in professional legal ethics and his long-standing involvement with law clinics both as an advisor at the University of Cape Town and Director of the University of Bristol Law Clinic and the University of Strathclyde Law Clinic. In this article he looks at how legal education may help start this process of character development, arguing that the best means is through student involvement in voluntary law clinics. And here he builds upon his recent article which argues for voluntary, community service oriented law clinics over those which emphasise the education of students