Randomised positive control trial of NSAID and antimicrobial treatment for calf fever caused by pneumonia

One hundred and fifty-four preweaning calves were followed between May and October 2015. Calves were fitted with continuous monitoring temperature probes (TempVerified FeverTag), programmed so a flashing light emitting diode (LED) light was triggered following six hours of a sustained ear canal temperature of ≥39.7°C. A total of 83 calves (61.9 per cent) developed undifferentiated fever, with a presumptive diagnosis of pneumonia through exclusion of other calf diseases. Once fever was detected, calves were randomly allocated to treatment groups. Calves in group 1 (NSAID) received 2 mg/kg flunixin meglumine (Allevinix, Merial) for three consecutive days and group 2 (antimicrobial) received 6 mg/kg gamithromycin (Zactran, Merial). If fever persisted for 72 hours after the initial treatment, calves were given further treatment (group 1 received antimicrobial and group 2 received NSAID). Calves in group 1 (NSAID) were five times more likely (P=0.002) to require a second treatment (the antimicrobial) after 72 hours to resolve the fever compared with the need to give group 2 (antimicrobial) calves a second treatment (NSAID). This demonstrates the importance of ongoing monitoring and follow-up of calves with respiratory disease. However, of calves with fever in group 1 (NSAID), 25.7 per cent showed resolution following NSAID-only treatment with no detrimental effect on the development of repeated fever or daily live weight gain. This suggests that NSAID alone may be a useful first-line treatment, provided adequate attention is given to ongoing monitoring to identify those cases that require additional antimicrobial treatment

Outdoor allergens.

Outdoor allergens are an important part of the exposures that lead to allergic disease. Understanding the role of outdoor allergens requires a knowledge of the nature of outdoor allergen-bearing particles, the distributions of their source, and the nature of the aerosols (particle types, sizes, dynamics of concentrations). Primary sources for outdoor allergens include vascular plants (pollen, fern spores, soy dust), and fungi (spores, hyphae). Nonvascular plants, algae, and arthropods contribute small numbers of allergen-bearing particles. Particles are released from sources into the air by wind, rain, mechanical disturbance, or active discharge mechanisms. Once airborne, they follow the physical laws that apply to all airborne particles. Although some outdoor allergens penetrate indoor spaces, exposure occurs mostly outdoors. Even short-term peak outdoor exposures can be important in eliciting acute symptoms. Monitoring of airborne biological particles is usually by particle impaction and microscopic examination. Centrally located monitoring stations give regional-scale measurements for aeroallergen levels. Evidence for the role of outdoor allergens in allergic rhinitis is strong and is rapidly increasing for a role in asthma. Pollen and fungal spore exposures have both been implicated in acute exacerbations of asthma, and sensitivity to some fungal spores predicts the existence of asthma. Synergism and/or antagonism probably occurs with other outdoor air particles and gases. Control involves avoidance of exposure (staying indoors, preventing entry of outdoor aerosols) as well as immunotherapy, which is effective for pollen but of limited effect for spores. Outdoor allergens have been the subject of only limited studies with respect to the epidemiology of asthma. Much remains to be studied with respect to prevalence patterns, exposure and disease relationships, and control

Outdoor Allergens

Outdoor allergens are an important part of the exposures that lead to allergic disease. Understanding the role of outdoor allergens requires a knowledge of the nature of outdoor allergen-bearing particles, the distributions of their source, and the nature of the aerosols (particle types, sizes, dynamics of concentrations). Primary sources for outdoor allergens include vascular plants (pollen, fern spores, soy dust), and fungi (spores, hyphae). Nonvascular plants, algae, and arthropods contribute small numbers of allergen-bearing particles. Particles are released from sources into the air by wind, rain, mechanical disturbance, or active discharge mechanisms. Once airborne, they follow the physical laws that apply to all airborne particles. Although some outdoor allergens penetrate indoor spaces, exposure occurs mostly outdoors. Even short-term peak outdoor exposures can be important in eliciting acute symptoms. Monitoring of airborne biological particles is usually by particle impaction and microscopic examination. Centrally located monitoring stations give regional-scale measurements for aeroallergen levels. Evidence for the role of outdoor allergens in allergic rhinitis is strong and is rapidly increasing for a role in asthma. Pollen and fungal spore exposures have both been implicated in acute exacerbations of asthma, and sensitivity to some fungal spores predicts the existence of asthma. Synergism and/or antagonism probably occurs with other outdoor air particles and gases. Control involves avoidance of exposure (staying indoors, preventing entry of outdoor aerosols) as well as immunotherapy, which is effective for pollen but of limited effect for spores. Outdoor allergens have been the subject of only limited studies with respect to the epidemiology of asthma. Much remains to be studied with respect to prevalence patterns, exposure and disease relationships, and control

An Adaptive Computational Model for Predicting the Density Distribution of the Proximal Femur

A custom algorithm was developed to simulate adaptive boneremodeling. The process of adaptive bone remodeling can besimulated with a self-optimizing finite element method (FEM). Thebasic remodeling rule attempts to obtain a constant value for thestrain energy per unit bone mass, by adapting density. The precisesolution is dependent on the loads, initial conditions and theparameters in the remodeling rule. The aim of this study was toidentify how the bone density distribution of the proximal femurwas affected by parameters which govern the remodeling process.The forces at different phases of the gait cycle were applied asboundary conditions. The bone density distributions from theseforces were averaged to estimate the density distribution in theproximal femur. The effect of varying the spatial influencefunction, and the influence range on the converged solution wereinvestigated. It was shown that varying these parameters withinreasonable upper and lower bounds had very little impact on thequalitative form of the converged solution. In all cases, thesolutions obtained are comparable with the actual density in theproximal femur, as measured by DEXA scans

Clinical investigation of an outbreak of alveolitis and asthma in a car engine manufacturing plant

Background Exposure to metal working fluid (MWF) has been associated with outbreaks of EAA in the US, with bacterial contamination of MWF being a possible cause, but was uncommon in the UK. Twelve workers developed extrinsic allergic alveolitis (EAA) in a car engine manufacturing plant in the UK, presenting clinically between December 2003 and May 2004. This paper reports the subsequent epidemiological investigation of the whole workforce. This had three aims:- • To measure the extent of the outbreak by identifying other workers who may have developed EAA or other work-related respiratory diseases. • To provide case-detection so that those affected can be treated. • To provide epidemiological data to identify the cause of the outbreak. Methods The outbreak was investigated in a three-phase cross-sectional survey of the workforce. Phase I A respiratory screening questionnaire was completed by 808/836 workers (96.7%) in May 2004. Phase II 481 employees with at least one respiratory symptom on screening and 50 asymptomatic controls were invited for investigation at the factory in June 2004. This included a questionnaire, spirometry and clinical opinion. 454/481(94.4%) responded along with 48/50(96%) controls. Workers were identified who needed further investigation and serial measurements of peak expiratory flow (PEF). Phase III 162 employees were seen at the Birmingham Occupational Lung Disease clinic. 198 employees returned PEF records, including 141 of the 162 who attended for clinical investigation. Case definitions for diagnoses were agreed. Results 87 workers (10.4% of workforce) met case definitions for occupational lung disease, comprising EAA(19), occupational asthma(74) and humidifier fever(7). 12 workers had more than one diagnosis. The peak onset of work-related breathlessness was Spring 2003. The proportion of workers affected was higher for those using metal working fluid (MWF) from a large sump(27.3%) compared with working all over the manufacturing area (7.9%) (OR=4.39,p<0.001). Two workers had positive specific provocation tests to the used but not the unused MWF solution. Conclusions Extensive investigation of the outbreak of EAA detected a large number of affected workers, not only with EAA but also occupational asthma. This is the largest reported outbreak in Europe. Mist from used MWF is the likely cause. In workplaces using MWF, there is a need to carry out risk assessments, to monitor and maintain fluid quality, to control mist and to carry out respiratory health surveillance

Stellar mass function of cluster galaxies at z ~ 1.5: evidence for reduced quenching efficiency at high redshift

Indexación: Web of ScienceWe present the stellar mass functions (SMFs) of passive and star-forming galaxies with a limiting mass of 10(10.1) M-circle dot in four spectroscopically confirmed Spitzer Adaptation of the Red-sequence Cluster Survey (SpARCS) galaxy clusters at 1 : 37 < z < 1 : 63. The clusters have 113 spectroscopically confirmed members combined, with 8-45 confirmed members each. We construct Ks-bandselected photometric catalogs for each cluster with an average of 11 photometric bands ranging from u to 8 mu m. We compare our cluster galaxies to a field sample derived from a similar Ks-band-selected catalog in the UltraVISTA / COSMOS field. The SMFs resemble those of the field, but with signs of environmental quenching. We find that 30 +/- 20% of galaxies that would normally be forming stars in the field are quenched in the clusters. The environmental quenching e ffi ciency shows little dependence on projected cluster-centric distance out to similar to 4 Mpc, providing tentative evidence of pre-processing and/or galactic conformity in this redshift range. We also compile the available data on environmental quenching efficiencies from the literature, and find that the quenching e ffi ciency in clusters and in groups appears to decline with increasing redshift in a manner consistent with previous results and expectations based on halo mass growth.http://www.aanda.org/articles/aa/abs/2016/08/aa28663-16/aa28663-16.htm

Fuselage shell and cavity response measurements on a DC-9 test section

A series of fuselage shell and cavity response measurements conducted on a DC-9 aircraft test section are described. The objectives of these measurements were to define the shell and cavity model characteristics of the fuselage, understand the structural-acoustic coupling characteristics of the fuselage, and measure the response of the fuselage to different types of acoustic and vibration excitation. The fuselage was excited with several combinations of acoustic and mechanical sources using interior and exterior loudspeakers and shakers, and the response to these inputs was measured with arrays of microphones and accelerometers. The data were analyzed to generate spatial plots of the shell acceleration and cabin acoustic pressure field, and corresponding acceleration and pressure wavenumber maps. Analysis and interpretation of the spatial plots and wavenumber maps provided the required information on modal characteristics, structural-acoustic coupling, and fuselage response