24 research outputs found
Recommended from our members
Free-Standing Nanomechanical and Nanophotonic Structures in Single-Crystal Diamond
Realizing complex three-dimensional structures in a range of material systems is critical to a variety of emerging nanotechnologies. This is particularly true of nanomechanical and nanophotonic systems, both relying on free-standing small-scale components. In the case of nanomechanics, necessary mechanical degrees of freedom require physically isolated structures, such as suspended beams, cantilevers, and membranes. For nanophotonics, elements like waveguides and photonic crystal cavities rely on light confinement provided by total internal reflection or distributed Bragg reflection, both of which require refractive index contrast between the device and surrounding medium (often air). Such suspended nanostructures are typically fabricated in a heterolayer structure, comprising of device (top) and sacrificial (middle) layers supported by a substrate (bottom), using standard surface nanomachining techniques. A selective, isotropic etch is then used to remove the sacrificial layer, resulting in free-standing devices. While high-quality, crystalline, thin film heterolayer structures are readily available for silicon (as silicon-on-insulator (SOI)) or III-V semiconductors (i.e. GaAs/AlGaAs), there remains an extensive list of materials with attractive electro-optic, piezoelectric, quantum optical, and other properties for which high quality single-crystal thin film heterolayer structures are not available. These include complex metal oxides like lithium niobate (LiNbO3), silicon-based compounds such as silicon carbide (SiC), III-V nitrides including gallium nitride (GaN), and inert single-crystals such as diamond.
Diamond is especially attractive for a variety of nanoscale technologies due to its exceptional physical and chemical properties, including high mechanical hardness, stiffness, and thermal conductivity. Optically, it is transparent over a wide wavelength range (from 220 nm to the far infrared), has a high refractive index (n ~ 2.4), and is host to a vast inventory of luminescent defect centers (many with direct optical access to highly coherent electron and nuclear spins). Diamond has many potential applications ranging from radio frequency nanoelectromechanical systems (RF-NEMS), to all-optical signal processing and quantum optics. Despite the commercial availability of wafer-scale nanocrystalline diamond thin films on foreign substrates (namely SiO2), this diamond-on-insulator (DOI) platform typically exhibits inferior material properties due to friction, scattering, and absorption losses at grain boundaries, significant surface roughness, and large interfacial stresses. In the absence of suitable heteroepitaxial diamond growth, substantial research and development efforts have focused on novel processing techniques to yield nanoscale single-crystal diamond mechanical and optical elements.
In this thesis, we demonstrate a scalable ‘angled-etching’ nanofabrication method for realizing nanomechanical systems and nanophotonic networks starting from bulk single-crystal diamond substrates. Angled-etching employs anisotropic oxygen-based plasma etching at an oblique angle to the substrate surface, resulting in suspended optical structures with triangular cross-sections. Using this approach, we first realize single-crystal diamond nanomechanical resonant structures. These nanoscale diamond resonators exhibit high mechanical quality-factors (approaching Q ~ 10^5) with mechanical resonances up to 10 MHz.
Next, we demonstrate engineered nanophotonic structures, specifically racetrack resonators and photonic crystal cavities, in bulk single-crystal diamond. Our devices feature large optical Q-factors, in excess of 10^5, and operate over a wide wavelength range, spanning visible and telecom. These newly developed high-Q diamond optical nanocavities open the door for a wealth of applications, ranging from nonlinear optics and chemical sensing, to quantum information processing and cavity optomechanics. Beyond isolated nanophotonic devices, we also developed free-standing angled-etched diamond waveguides which efficiently route photons between optical nanocavities, realizing true on-chip diamond nanophotonic networks. A high efficiency fiber-optical interface with aforementioned on-chip diamond nanophotonic networks, achieving > 90% power coupling, is also demonstrated.
Lastly, we demonstrate a cavity-optomechanical system in single-crystal diamond, which builds upon previously realized diamond nanobeam photonic crystal cavities fabricated by angled-etching. Specifically, we demonstrate diamond optomechanical crystals (OMCs), where the engineered co-localization of photons and phonons in a quasi-periodic diamond nanostructure leads to coupling of an optical cavity field to a mechanical mode via the radiation pressure of light. In contrast to other material systems, diamond OMCs possess large intracavity photon capacity and sufficient optomechanical coupling rates to exceed a cooperativity of ~ 1 at room temperature and realize large amplitude optomechanical self-oscillations.Engineering and Applied Sciences - Applied Physic
Exercise testing three days after onset of acute myocardial infarction
To determine the feasibility and predictive value of early exercise testing 72 hours after acute myocardial infarction, 109 consecutive patients who received reperfusion therapy were prospectively evaluated. In the group studied, in 87 (80%) the course was uncomplicated 3 days after admission, as defined by a lack of congestive heart failure, arrhythmias and angina, and 53 patients (49%) performed heart rate-limited (140 beats/min) treadmill exercise. These patients exercised for 7.9 +/- 3.4 minutes, achieving a heart rate of 129 +/- 11 beats/min and a systolic blood pressure of 151 +/- 27 mm Hg. The exercise test was not accompanied by any protracted ischemia, infarction or significant arrhythmias. Accompanying tomographic thallium-201 scintigraphy demonstrated a reversible perfusion defect in 14 patients (26%), no evidence for ischemia in 36 patients (69%) and an equivocal result in 3 patients (6%). Of the 14 patients with a positive exercise-thallium test result, 4 had an adverse clinical outcome of either reinfarctipn, postinfarction angina or ventricular tachycardia during hospital days 4 to 10; an adverse in-hospital outcome was not seen in the 40 patients with a negative exercise-thallium test result (p = 0.009). Thus, early exercise testing after acute myocardial infarction is safe in selected patients with an uncomplicated course and the test is predictive of in-hospital clinical outcomes.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/26528/1/0000067.pd
Recommended from our members
Diamond optomechanical crystals
Cavity-optomechanical systems realized in single-crystal diamond are poised to benefit from its extraordinary material properties, including low mechanical dissipation and wide optical transparency window. Diamond is also rich in optically active defects, such as the nitrogen-vacancy (NV) center, which behave as atom-like systems in the solid state. Predictions and observations of coherent coupling of the NV electronic spin to phonons via lattice strain has motivated the development of diamond nanomechanical devices aimed at realization of hybrid quantum systems, in which phonons provide an interface with diamond spins. In this work, we demonstrate a device platform to enable such applications: diamond optomechanical crystals (OMCs), where the co-localization of ~ 200 THz photons and ~ 6 GHz phonons in a quasi-periodic diamond nanostructure leads to coupling of an optical cavity field to a mechanical mode via the radiation pressure of light. In contrast to other material systems, diamond OMCs operating in the resolved sideband regime possess large intracavity photon capacity (> 105) and sufficient optomechanical coupling rate to exceed a cooperativity of ~ 1 at room temperature and realize large amplitude optomechanical self-oscillations. Strain-mediated coupling of the high frequency (~ GHz) mechanical modes of these devices to the electronic and spin levels of diamond color centers has the potential to reach the strong spin-phonon coupling regime, and enable a coherent interface with diamond qubits for applications in quantum-nonlinear optomechanics.Physic
NOD2 Mutations and Anti-Saccharomyces cerevisiae Antibodies Are Risk Factors for Crohn's Disease in African Americans
NOD2 mutations and anti-Saccharomyces cerevisiae antibodies (ASCA) are associated with Crohn’s disease (CD), ileal involvement and complicated disease behavior in whites. ASCA and the three common NOD2 mutations have not been assessed in African American (AA) adults with CD
Strain engineering of the silicon-vacancy center in diamond
We control the electronic structure of the silicon-vacancy (SiV) color-center in diamond by changing its static strain environment with a nano-electro-mechanical system. This allows deterministic and local tuning of SiV optical and spin transition frequencies over a wide range, an essential step towards multiqubit networks. In the process, we infer the strain Hamiltonian of the SiV revealing large strain susceptibilities of order 1 PHz/strain for the electronic orbital states. We identify regimes where the spin-orbit interaction results in a large strain susceptibility of order 100 THz/strain for spin transitions, and propose an experiment where the SiV spin is strongly coupled to a nanomechanical resonator
Abstracts from the 20th International Symposium on Signal Transduction at the Blood-Brain Barriers
https://deepblue.lib.umich.edu/bitstream/2027.42/138963/1/12987_2017_Article_71.pd
Toward an integrated history to guide the future
Many contemporary societal challenges manifest themselves in the domain of human–environment interactions. There is a growing recognition that responses to these challenges formulated within current disciplinary boundaries, in isolation from their wider contexts, cannot adequately address them. Here, we outline the need for an integrated, transdisciplinary synthesis that allows for a holistic approach, and, above all, a much longer time perspective. We outline both the need for and the fundamental characteristics of what we call “integrated history.” This approach promises to yield new understandings of the relationship between the past, present, and possible futures of our integrated human–environment system. We recommend a unique new focus of our historical efforts on the future, rather than the past, concentrated on learning about future possibilities from history. A growing worldwide community of transdisciplinary scholars is forming around building this Integrated History and future of People on Earth (IHOPE). Building integrated models of past human societies and their interactions with their environments yields new insights into those interactions and can help to create a more sustainable and desirable future. The activity has become a major focus within the global change community
Recommended from our members
Free-Standing Mechanical and Photonic Nanostructures in Single-Crystal Diamond
A variety of nanoscale photonic, mechanical, electronic, and optoelectronic devices require scalable thin film fabrication. Typically, the device layer is defined by thin film deposition on a substrate of a different material, and optical or electrical isolation is provided by the material properties of the substrate or by removal of the substrate. For a number of materials this planar approach is not feasible, and new fabrication techniques are required to realize complex nanoscale devices. Here, we report a three-dimensional fabrication technique based on anisotropic plasma etching at an oblique angle to the sample surface. As a proof of concept, this angled-etching methodology is used to fabricate free-standing nanoscale components in bulk single-crystal diamond, including nanobeam mechanical resonators, optical waveguides, and photonic crystal and microdisk cavities. Potential applications of the fabricated prototypes range from classical and quantum photonic devices to nanomechanical-based sensors and actuators.Physic