29 research outputs found

    Hemoprotozoa of domestic animals in France: Prevalence and molecular characterization

    Get PDF
    Very limited information is available on epizootiology of haematozoan infections in French domestic animals. In an attempt to address this issue, prevalence of piroplasmida was studied in carnivores and ruminants, whereas prevalence of Hepatozoon spp. was only investigated in carnivores. In total, 383 animals were included in the survey (namely 116 cats, 108 dogs, 91 sheep and 68 cows). Parasite diagnosis was carried out using molecular methods such as PCR and sequencing of the 18S rRNA gene. In addition, ruminant samples were analyzed with the reverse line blotting technique (RLB). Results of RLB and PCR plus sequencing were in total agreement. In carnivores, haematozoan prevalence was close to 1%. Two cats were infected by H. canis (1.7% prevalence) and one of them was co-infected by Cytauxzoon sp. (0.8%). This represents the first finding of both pathogens in French cats. One dog was infected by H. canis (0.9%) and another by Babesia canis vogeli (0.9%). In ruminants, haematozoan prevalence (piroplasmida) was significantly higher than in carnivores (4.8% in sheep and 8.8% in cow). Theileria ovis was found in 1 sheep, Theileria sp. in 2 sheep, Theileria buffeli in 5 cows and B. major in 1 cow. Evidence presented in this contribution indicates that haematic protozoa are not widely distributed in domestic mammal populations of France

    Effect of 3d-doping on the electronic structure of BaFe2As2

    Get PDF
    The electronic structure of BaFe2As2 doped with Co, Ni, and Cu has been studied by a variety of experimental and theoretical methods, but a clear picture of the dopant 3d states has not yet emerged. Herein we provide experimental evidence of the distribution of Co, Ni, and Cu 3d states in the valence band. We conclude that the Co and Ni 3d states provide additional free carriers to the Fermi level, while the Cu 3d states are found at the bottom of the valence band in a localized 3d10 shell. These findings help shed light on why superconductivity can occur in BaFe2As2 doped with Co and Ni but not Cu.Comment: 18 pages, 8 figure

    Development of fluorogenic probe-based PCR assays for the detection and quantification of bovine piroplasmids.

    Get PDF
    This paper reports two new quantitative PCR (qPCR) assays, developed in an attempt to improve the detection of bovine piroplasmids. The first of these techniques is a duplex TaqMan assay for the simultaneous diagnosis of Babesia bovis and B. bigemina. This technique is ideal for use in South America where bovids harbour no theilerids. The second technique, which is suitable for the diagnosis of both babesiosis and theileriosis worldwide, involves fluorescence resonance energy transfer (FRET) probes. In FRET assays, Babesia bovis, B. divergens, Babesia sp. (B. major or B. bigemina), Theileria annae and Theileria sp. were all identifiable based on the melting temperatures of their amplified fragments. Both techniques provided linear calibration curves over the 0.1fg/microl to 0.01ng/microl DNA range. The assays showed good sensitivity and specificity. To assess their performance, both procedures were compared in two separate studies: the first was intended to monitor the experimental infection of calves with B. bovis and the second was a survey where 200 bovid/equine DNA samples from different countries were screened for piroplasmids. Comparative studies showed that duplex TaqMan qPCR was more sensitive than FRET qPCR in the detection of babesids

    Electronic structure of CaFe2As2: Contribution of itinerant Fe 3d-states to the Fermi Level

    Full text link
    We present density functional theory (DFT) calculations and a full set of X-ray spectra (resonant inelastic X-ray scattering and X-ray photoelectron spectra) measurements of single crystal CaFe2As2. The experimental valence band spectra are consistent with our DFT calculations. Both theory and experiment show that the Fe 3d-states dominate the Fermi level and hybridize with Ca 3d-states. The simple shape of Xray photoelectron (XPS) Fe 2p-core level spectrum (without any satellite structure typical for correlated systems) suggests itinerant character of the Fe 3d-electrons. Based on the similarity of the calculated and experimental Fe 3d-states distribution in LaOFeAs and CaFe2As2 we conclude that superconductivity in the FeAs-systems can be described within a minimal model, taking into account only Fe 3d-bands close to the Fermi level.Comment: 19 pages, 9 figures inline with tex

    Effect of 3d doping on the electronic structure of BaFe2As2

    Get PDF
    The electronic structure of BaFe2As2 doped with Co, Ni and Cu has been studied by a variety of experimental and theoretical methods, but a clear picture of the dopant 3d states has not yet emerged. Herein we provide experimental evidence of the distribution of Co, Ni and Cu 3d states in the valence band. We conclude that the Co and Ni 3d states provide additional free carriers to the Fermi level, while the Cu 3d states are found at the bottom of the valence band in a localized 3d10 shell. These findings help shed light on why superconductivity can occur in BaFe2As2 doped with Co and Ni but not Cu

    Carbon States in Carbon-Encapsulated Nickel Nanoparticles Studied by Means of X-Ray Absorption, Emission, and Photoelectron Spectroscopies

    Full text link
    Electronic structure of nickel nanoparticles encapsulated in carbon was characterized by photoelectron, X-ray absorption, and X-ray emission spectroscopies. Experimental spectra are compared with the density of states calculated in the frame of the density functional theory. The carbon shell of Ni nanoparticles has been found to be multilayer graphene with significant (about 6%) amount of Stone--Wales defects. Results of the experiments evidence protection of the metallic nanoparticles from the environmental degradation by providing a barrier against oxidation at least for two years. Exposure in air for 2 years leads to oxidation only of the carbon shell of Ni@C nanoparticles with coverage of functional groups.Comment: 16 pages, 6 figures, accepted in J. Phys. Chem.

    The electronic structure of LiFeAs and NaFeAs probed by resonant inelastic x-ray scattering spectra

    Full text link
    Results of resonant inelastic X-ray scattering (RIXS) measurements at Fe L-edges and electronic structure calculations of LiFeAs and NaFeAs are presented. Both experiment and theory show that in the vicinity of the Fermi energy, the density of states is dominated by contributions from Fe 3d-states. The comparison of Fe L2,3 non-resonant and resonant (excited at L2-threshold) X-ray emission spectra with spectra of LaOFeAs and CaFe2As2 show a great similarity in energy and I(L2)/I(L3) intensity ratio. The I(L2)/I(L3) intensity ratio of all FeAs-based superconductors is found to be more similar to metallic Fe than to correlated FeO. Basing on these measurements we conclude that iron-based superconductors are weakly or moderately correlated systems.Comment: 11 pages, 6 figure

    Presence of Mycoplasma haemofelis, Mycoplasma haemominutum and piraplasmids in cats from southern Europe: a molecular study. Vet Microbiol

    No full text
    Abstract Clinical symptoms produced by Mycoplasma spp. and piroplasmids in cats are sometimes similar. Diagnosis of these pathogens is difficult by microscopic procedures and molecular methods have been used as an alternative. We present in this work, the development of new molecular procedures for diagnosis of the aforementioned organisms, together with a molecular characterization of isolates found in southern European cats. A single PCR-RFLP procedure was designed for diagnosis of Mycoplasma spp. and a seminested PCR-RFLP was designed for diagnosis of piroplasmids. The 16S or 18S rRNA genes of isolates found in clinical samples were partially sequenced in all positive cases. Mycoplasma spp. was detected in 9 (30%) out of 30 symptomatic cats from Spain. Sequencing indicated that 66.6% of these isolates can be ascribed to Mycoplasma haemofelis and only 33.3% to Mycoplasma haemominutum. Partial 16S rRNA sequences obtained in Spanish isolates were very similar to those previously published from the UK and the USA. The presence of piroplasmids (Babesia and Theileria spp.) was studied in 16 cats from Spain (n = 13) and Portugal (n = 3). Animals analyzed were 10 cats with immunosuppressive viral infection (either FeLV or FIV), 5 asymptomatic cats and 1 cat with Babesia-compatible symptoms. Asymptomatic cats were all PCR-negative. Partial sequencing of 18S rRNA gene demonstrated that the Babesia-symptomatic cat was infected with Babesia canis canis whereas 3 (30%) out of the * Corresponding author. A. Criado-Fornelio et al. / Veterinary Microbiology 93 (2003) [307][308][309][310][311][312][313][314][315][316][317] 10 cats with immunosuppressive viral infection were coinfected with piroplasmids (1 with B. canis canis, 1 with Theileria annae, and 1 with B. canis canis and T. annae both)

    Laser surface pretreatment of 100Cr6 bearing steel - hardening effects and white etching zones

    No full text
    In order to achieve a surface pretreatment of the bearing steel 100Cr6 (1 – 1.5 wt. – % Cr) a laser-based process was used. The obtained modification may result in an optimization of the adhesive properties of the surface with respect to an anticorrosion polymer coating on the basis of PEEK (poly-ether-ether-ketone), which is applied on the steel surface by a laser melting technique. This work deals with the influence of the laser-based pretreatment regarding the surface microstructure and the micro-hardness of the steel, which has been examined by scanning electron microscopy (SEM), light microscopy and automated micro-hardness testing. The most suitable parameter set for the laser-based pretreatment leads to the formation of very hard white etching zones (WEZ) with a thickness of 23 μm, whereas this pretreatment also induces topographical changes. The occurrence of the white etching zones is attributed to near-surface re-austenitization and rapid quenching. Moreover, dark etching zones (DEZ) with a thickness of 32 μm are found at the laser path edges as well as underneath the white etching zones (WEZ). In these areas, the hardness is decreased due to the formation of oxides as a consequence of re-tempering
    corecore