Advanced Test Accelerator (ATA) injector

The ATA injector, developed from experience gained from the Experimental Test Accelerator (ETA) linac, has recently been completed. The injector consists of ten 0.25 MV cells that are used to develop 2.5 MV across a single diode gap. The 10 kA beam is extracted from a 500 cm/sup 2/ plasma cathode at average rates of up to 5 Hz and burst rates to 1 kHz. Pulsed power from 20 water filled blumleins is divided and introduced symmetrically through four ports on each cell. All major insulators are fabricated from filled epoxy castings. With these improvements, the ATA injector is smaller than the ETA injector; has a faster pulse response; has lower voltage stress on insulators and higher ultimate performance. Injector characterization tests began in October 1982. These tests include beam current, energy, and emittance measurements

Experimental test accelerator (ETA)

The Lawrence Livermore Laboratory is constructing an induction linac with the following parameters 10kA, 50ns FWHM pulse width, 5MeV, and 5PPS. This paper describes the design features of the 2.5 MeV injector and it's associated pulsed power system