539 research outputs found
Response and Discrimination Performance of Arrays of Organothiol-Capped Au Nanoparticle Chemiresistive Vapor Sensors
The response and discrimination performance of an array that consisted of 20 different organothiol-capped Au nanoparticle chemiresistive vapor sensors was evaluated during exposure to 13 different organic vapors. The passivating organothiol ligand library consisted of collections of straight-chain alkanethiols, branched alkanethiols, and aromatic thiols. A fourth collection of sensors was formed from composites of 2-phenylethanethiol-capped Au nanoparticles and nonpolymeric aromatic materials that were coembedded in a sensor film. The organic vapors consisted of six hydrocarbons (n-hexane, n-heptane, n-octane, isooctane, cyclohexane, and toluene), three polar aprotic vapors (chloroform, tetrahydrofuran, and ethyl acetate), and four alcohols (methanol, ethanol, isopropanol, and 1-butanol). Trends in the resistance response of the sensors were consistent with expected trends in sorption due to the properties of the test vapor and the molecular structure of the passivating ligands in the sensor films. Classification algorithms including principal components analysis and Fisherās linear discriminant were used to evaluate the discrimination performance of an array of such sensors. Each collection of sensors produced accurate classification of most vapors, with misclassification occurring primarily for vapors that had mutually similar polarity. The classification performance for an array that contained all of the sensor collections produced nearly perfect discrimination for all vapors studied. The dependence of the array size (i.e., the number of sensors) and the array chemical diversity on the discrimination performance indicated that, for an array of 20 sensors, an array size of 13 sensors or more produced the maximum discrimination performance
Phosphine Functionalization of GaAs(111)A Surfaces
Phosphorus-functionalized GaAs surfaces have been prepared by exposure of Cl-terminated GaAs(111)A surfaces to triethylphosphine (PEt3) or trichlorophosphine (PCl3), or by the direct functionalization of the native-oxide terminated GaAs(111)A surface with PCl3. The presence of phosphorus on each functionalized surface was confirmed by X-ray photoelectron spectroscopy. High-resolution, soft X-ray photoelectron spectroscopy was used to evaluate the As and Ga 3d regions of such surfaces. On PEt3 treated surfaces, the Ga 3d spectra exhibited a bulk Ga peak as well as peaks that were shifted to 0.35, 0.92 and 1.86 eV higher binding energy. These peaks were assigned to residual Cl-terminated Ga surface sites, surficial Ga2O and surficial Ga2O3, respectively. For PCl3-treated surfaces, the Ga 3d spectra displayed peaks ascribable to bulk Ga(As), Ga2O, and Ga2O3, as well as a peak shifted 0.30 eV to higher binding energy relative to the bulk signal. A peak corresponding to Ga(OH)3, observed on the Cl-terminated surface, was absent from all of the phosphine-functionalized surfaces. After reaction of the Cl-terminated GaAs(111)A surface with PCl3 or PEt3, the As 3d spectral region was free of As oxides and As0. Although native oxide-terminated GaAs surfaces were free of As oxides after reaction with PCl3, such surfaces contained detectable amounts of As0. Photoluminescence measurements indicted that phosphine-functionalized surfaces prepared from Cl-terminated GaAs(111)A surfaces had better electrical properties than the native-oxide capped GaAs(111)A surface, while the native-oxide covered surface treated with PCl3 showed no enhancement in PL intensity
Syntheses and Properties of Salts of Chromophores with Ferrocenyl Electron Donor Groups and Quaternary Nitrogen Acceptors
A series of five new dipolar cations has been synthesized with ferrocenyl (Fc) electron donor groups connected to N-arylpyridinium, N-methylquinolinium, N-methylbenzothiazolium, or N-methylacridinium acceptors. Together with their known N-methylpyridinium analogue, these chromophores have been characterized as their PF_6^ā salts by using various techniques including electronic absorption spectroscopy and cyclic voltammetry. Nine single-crystal X-ray structures have been determined, including two polymorphs of one salt obtained from a single crystallization experiment, and two of these are polar materials. A highly favorable degree of dipolar alignment for bulk NLO effects is observed in one case. Molecular quadratic nonlinear optical (NLO) responses have been determined by using femtosecond hyper-Rayleigh scattering (HRS) at 1300 nm and also via Stark (electroabsorption) spectroscopic studies on the intense Ļ ā Ļ^* intraligand and d ā Ļ^* metal-to-ligand charge-transfer bands. A broad correlation between the electron acceptor strength and the HRS-derived first hyperpolarizabilities Ī² and the static first hyperpolarizabilities Ī²0 estimated from the Stark data is evident. This is the first time that meaningful (albeit indirectly determined) Ī²_0 data have been reported for Fc compounds, allowing quantitative comparisons with the chromophore in the technologically important material (E)-4ā²-(dimethylamino)-N-methyl-4-stilbazolium (DAS) tosylate. The observed Ī²_0 values are in several cases similar to that of [DAS]PF_6, and possibly even larger in one instance
Photoelectrochemical Hydrogen Evolution Using Si Microwire Arrays
Arrays of B-doped p-Si microwires, diffusion-doped with P to form a radial n+ emitter and subsequently coated with a 1.5-nm-thick discontinuous film of evaporated Pt, were used as photocathodes for H_2 evolution from water. These electrodes yielded thermodynamically based energy-conversion efficiencies >5% under 1 sun solar simulation, despite absorbing less than 50% of the above-band-gap incident photons. Analogous p-Si wire-array electrodes yielded efficiencies <0.2%, largely limited by the low photovoltage generated at the p-Si/H_2O junction
Electrocatalytic Hydrogen Evolution at Low Overpotentials by Cobalt Macrocyclic Glyoxime and Tetraimine Complexes
Cobalt complexes supported by diglyoxime ligands of the type Co(dmgBF_2)_2(CH_3CN)_2 and Co(dpgBF_2)_2(CH_3CN)_2 (where dmgBF_2 is difluoroboryl-dimethylglyoxime and dpgBF_2 is difluoroboryl-diphenylglyoxime), as well as cobalt complexes with [14]-tetraene-N_4 (Tim) ligands of the type [Co(Tim^R)X_2]^(n+) (R = methyl or phenyl, X = Br or CH_3CN; n = 1 with X = Br and n = 3 with X = CH_3CN), have been observed to evolve H_2 electrocatalytically at potentials between ā0.55 V and ā0.20 V vs SCE in CH_3CN. The complexes with more positive Co(II/I) redox potentials exhibited lower activity for H_2 production. For the complexes Co(dmgBF_2)_2(CH_3CN)_2, Co(dpgBF_2)_2(CH_3CN)_2, [Co(Tim^(Me))Br2]Br, and [Co(Tim^(Me))(CH_3CN)_2](BPh_4)_3, bulk electrolysis confirmed the catalytic nature of the process, with turnover numbers in excess of 5 and essentially quantitative faradaic yields for H_2 production. In contrast, the complexes [Co(Tim^(Ph/Me))Br_2]Br and [Co(Tim^(Ph/Me))(CH_3CN)_2](BPh_4)_3 were less stable, and bulk electrolysis only produced faradaic yields for H_2 production of 20ā25%. Cyclic voltammetry of Co(dmgBF_2)_2(CH_3CN)_2, [Co(Tim^(Me))Br_2]^+, and [Co(Tim^(Me))(CH_3CN)_2]^(3+) in the presence of acid revealed redox waves consistent with the Co(III)āH/Co(II)āH couple, suggesting the presence of Co(III) hydride intermediates in the catalytic system. The potentials at which these Co complexes catalyzed H_2 evolution were close to the reported thermodynamic potentials for the production of H_2 from protons in CH_3CN, with the smallest overpotential being 40 mV for Co(dmgBF_2)_2(CH_3CN)_2 determined by electrochemistry. Consistent with this small overpotential, Co(dmgBF_2)_2(CH_3CN)_2 was also able to oxidize H_2 in the presence of a suitable conjugate base. Digital simulations of the electrochemical data were used to study the mechanism of H_2 evolution catalysis, and these studies are discussed
Electrocatalytic Hydrogen Evolution at Low Overpotentials by Cobalt Macrocyclic Glyoxime and Tetraimine Complexes
Measurement of the Band Bending and Surface Dipole at Chemically Functionalized Si(111)/Vacuum Interfaces
The core-level energy shifts observed using X-ray photoelectron spectroscopy (XPS) have been used to determine the band bending at Si(111) surfaces terminated with SiāBr, SiāH, and SiāCH3 groups, respectively. The surface termination influenced the band bending, with the Si 2p3/2 binding energy affected more by the surface chemistry than by the dopant type. The highest binding energies were measured on Si(111)āBr (whose Fermi level was positioned near the conduction band at the surface), followed by Si(111)āH, followed by Si(111)āCH3 (whose Fermi level was positioned near midgap at the surface). Si(111)āCH3 surfaces exposed to Br2(g) yielded the lowest binding energies, with the Fermi level positioned between midgap and the valence band. The Fermi level position of Br2(g)-exposed Si(111)āCH3 was consistent with the presence of negatively charged bromine-containing ions on such surfaces. The binding energies of all of the species detected on the surface (C, O, Br) shifted with the band bending, illustrating the importance of isolating the effects of band bending when measuring chemical shifts on semiconductor surfaces. The influence of band bending was confirmed by surface photovoltage (SPV) measurements, which showed that the core levels shifted toward their flat-band values upon illumination. Where applicable, the contribution from the X-ray source to the SPV was isolated and quantified. Work functions were measured by ultraviolet photoelectron spectroscopy (UPS), allowing for calculation of the sign and magnitude of the surface dipole in such systems. The values of the surface dipoles were in good agreement with previous measurements as well as with electronegativity considerations. The binding energies of the adventitious carbon signals were affected by band bending as well as by the surface dipole. A model of band bending in which charged surface states are located exterior to the surface dipole is consistent with the XPS and UPS behavior of the chemically functionalized Si(111) surfaces investigated herein
- ā¦